The Most Popular Urban Mobility App in Halifax.
All local mobility options in one app
How to get from Arklow Dr After John Stewart Dr (6035) to Windsor Junction by bus?
From Arklow Dr After John Stewart Dr (6035) to Windsor Junction by bus
To get from Arklow Dr After John Stewart Dr (6035) to Windsor Junction in Waverley-Fall River-Beaver Bank, you’ll need to take 3 bus lines: take the 168B bus from Arklow Dr After John Stewart Dr (6035) station to Bridge Terminal station. Next, you’ll have to switch to the 87 bus and finally take the 86 bus from Downsview Dr After Touchstone Ct (9000) station to Beaver Bank Rd After Windgate Dr (8711) station. The total trip duration for this route is approximately 1 hr 55 min. The bus schedule from Arklow Dr After John Stewart Dr (6035) may change. We recommend you check the updated bus schedule to Windsor Junction on the Moovit app.
115min
168B8786
Leaves from Arklow Dr After John Stewart Dr (6035)
Step by Step
- 1
Start from bus stationArklow Dr After John Stewart Dr (6035) - 2168BWait for bus168B168b Express To University Ave
- 3
Ride to bus stationBridge TerminalID 1000130 min - 4Walk to bus stationBridge TerminalID 1000170 m • 1 min
- 587Wait for bus8787 Sackville Terminal
- 6Ride to bus stationDownsview Dr Before Touchstone Ct (9001)ID 900136 min
- 7Walk to bus stationDownsview Dr After Touchstone Ct (9000)ID 900060 m • 1 min
- 886Wait for bus8686 Beaver Bank
- 9Ride to bus stationBeaver Bank Rd After Windgate Dr (8711)ID 87117 min
- 10Walk toWindsor Junction2.16 km • 28 min
*Duration based on 8am traffic
Alternative route from Arklow Dr After John Stewart Dr (6035) to Windsor Junction by bus via 168B, 87 and 82
To get from Arklow Dr After John Stewart Dr (6035) to Windsor Junction in Waverley-Fall River-Beaver Bank, you’ll need to take 3 bus lines: take the 168B bus from Arklow Dr After John Stewart Dr (6035) station to Bridge Terminal station. Next, you’ll have to switch to the 87 bus and finally take the 82 bus from Cobequid Terminal station to Stokil Dr Before Beaver Bank Rd (8357) station. The total trip duration for this route is approximately 2 hr 2 min. The bus schedule from Arklow Dr After John Stewart Dr (6035) may change. We recommend you check the updated bus schedule to Windsor Junction on the Moovit app.
122min
168B8782Leaves from Arklow Dr After John Stewart Dr (6035)
Step by Step
- 1Start from bus stationArklow Dr After John Stewart Dr (6035)
- 2168BWait for bus168B168b Express To University Ave
- 3Ride to bus stationBridge TerminalID 1000130 min
- 4Walk to bus stationBridge TerminalID 1000170 m • 1 min
- 587Wait for bus8787 Sackville Terminal
- 6Ride to bus stationCobequid TerminalID 1000526 min
- 782Wait for bus8282 Sackville Terminal Via First Lake
- 8Ride to bus stationStokil Dr Before Beaver Bank Rd (8357)ID 835717 min
- 9Walk toWindsor Junction2.83 km • 36 min
*Duration based on 8am traffic
Public transit directions from Arklow Dr After John Stewart Dr (6035) to Windsor Junction
The distance between Arklow Dr After John Stewart Dr (6035), Waverley-Fall River-Beaver Bank and Windsor Junction, Waverley-Fall River-Beaver Bank is approximately 34.53 km, which can typically be travelled in 115 min. Moovit will show you the directions from Arklow Dr After John Stewart Dr (6035) to Windsor Junction by bus, so no matter how you choose to travel in Waverley-Fall River-Beaver Bank – you will always have plenty of easy options.
Bus schedule from Arklow Dr After John Stewart Dr (6035) to Windsor Junction
To check the bus schedule from Arklow Dr After John Stewart Dr (6035) to Windsor Junction using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Arklow Dr After John Stewart Dr (6035)) and destination (Windsor Junction), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.
Related Routes
- Horseshoe Lake Dr at Civic 100 (6155) to Windsor Junction
- Windmill Rd Before Wyse Rd (7196) to Windsor Junction
- Inglis St Before Mclean St (6566) to Windsor Junction
- Horseshoe Lake Dr at Civic 59 (6505) to Windsor Junction
- Radcliffe Dr Before Raleigh Ct (6658) to Windsor Junction
- Radcliffe Dr After Dunbrack St (6657) to Windsor Junction
- Grassy Lake Dr Opposite Transit Centre (9051) to Windsor Junction
- Gottingen St Before Charles St (2327) to Windsor Junction
- St Margarets Bay Rd After Raines Mill Rd (2328) to Windsor Junction
- St Margarets Bay Rd at Civic 1917 (2330) to Windsor Junction
- Barrington St Before Artz St (2333) to Windsor Junction
- Barrington St Before Roundabout (2345) to Windsor Junction
- Barrington St After Upper Water St (2347) to Windsor Junction
- Barrington St Before Cogswell St Bay 2 (2348) to Windsor Junction
- Finlay Dr After Wright Ave (9116) to Windsor Junction
- Barrington St Before Upper Water St (2346) to Windsor Junction
- Barrington St Before Smith St (2350) to Windsor Junction
- Prospect Rd Before Carpool Parking Lot (2353) to Windsor Junction
- Kelly St After Halef Ct (2300) to Windsor Junction
- Oxford St Before Jubilee Rd (2308) to Windsor Junction
Alternative route from Arklow Dr After John Stewart Dr (6035) to Windsor Junction by bus via 168B, 87 and 82
To get from Arklow Dr After John Stewart Dr (6035) to Windsor Junction in Waverley-Fall River-Beaver Bank, you’ll need to take 3 bus lines: take the 168B bus from Arklow Dr After John Stewart Dr (6035) station to Bridge Terminal station. Next, you’ll have to switch to the 87 bus and finally take the 82 bus from Cobequid Terminal station to Stokil Dr Before Beaver Bank Rd (8357) station. The total trip duration for this route is approximately 2 hr 2 min. The bus schedule from Arklow Dr After John Stewart Dr (6035) may change. We recommend you check the updated bus schedule to Windsor Junction on the Moovit app.
122min
168B8782Leaves from Arklow Dr After John Stewart Dr (6035)
Step by Step
- 1Start from bus stationArklow Dr After John Stewart Dr (6035)
- 2168BWait for bus168B168b Express To University Ave
- 3Ride to bus stationBridge TerminalID 1000130 min
- 4Walk to bus stationBridge TerminalID 1000170 m • 1 min
- 587Wait for bus8787 Sackville Terminal
- 6Ride to bus stationCobequid TerminalID 1000526 min
- 782Wait for bus8282 Sackville Terminal Via First Lake
- 8Ride to bus stationStokil Dr Before Beaver Bank Rd (8357)ID 835717 min
- 9Walk toWindsor Junction2.83 km • 36 min
*Duration based on 8am traffic
Questions & Answers
What is the fastest way to get from Arklow Dr After John Stewart Dr (6035) to Windsor Junction?
The fastest way takes 115 minutes, using Bus line 168B, Bus line 87, Bus line 86.
What is the alternative route to get from Arklow Dr After John Stewart Dr (6035) to Windsor Junction?
The alternative route takes 122 minutes, using Bus line 168B, Bus line 87, Bus line 82.
Is there a direct bus between Arklow Dr After John Stewart Dr (6035) and Windsor Junction?
No, you’ll have to take 3 bus lines in total. The total travelling time is 1 hr 55 min.
Which bus line goes from Arklow Dr After John Stewart Dr (6035) to Windsor Junction?
The 168B bus line goes from 168b Express To University Ave station near Arklow Dr After John Stewart Dr (6035) in Cole Harbour-Portland Valley to Bridge Terminal station. From there you’ll have to take one bus line till Bridge Terminal station near Windsor Junction in Waverley-Fall River-Beaver Bank.
How long does it take to travel from Arklow Dr After John Stewart Dr (6035) to Windsor Junction by bus?
The total travel time between Arklow Dr After John Stewart Dr (6035) in Cole Harbour-Portland Valley and Windsor Junction in Waverley-Fall River-Beaver Bank by bus is about 1 hr 55 min.
Where do I get on the bus near Arklow Dr After John Stewart Dr (6035) to get to Windsor Junction?
Get on the 168B bus from the 168b Express To University Ave stop near Arklow Dr After John Stewart Dr (6035) in Cole Harbour-Portland Valley.
Where do I get off the bus when travelling between Arklow Dr After John Stewart Dr (6035) and Windsor Junction?
Get off the bus at the Bridge Terminal stop, which is closest to Windsor Junction in Waverley-Fall River-Beaver Bank.
Popular Routes
- Micmac Blvd at Civic 10 (7210) to Dalhousie University Carleton Campus
- Dutch Village Rd Before Deal St (6615) to QEII - Dickson Building
- Bayers Rd Before Connolly St (6201) to Dalhousie University Carleton Campus
- Robie St After Quinpool Rd (8184) to Dalhousie University Carleton Campus
- Robie St After Cunard St (8205) to Hammonds Plains
- Inglis St Before Mclean St (6566) to QEII - Dickson Building
- Pleasant St After Hwy 111 (7472) to Mount Saint Vincent University
- Valour Way After Centre Gate (6571) to Saint Mary's University
- Water St Terminal to Hammonds Plains
- Alderney Dr Before Prince St (6028) to Dalhousie University Carleton Campus
- Williams Lake Rd After Birchview Dr (2180) to Dalhousie University Carleton Campus
- John Savage Ave After Wright Ave (2287) to Victoria General Hospital
- Chebucto Rd Before Quinn St (6409) to Saint Mary's University
- Forest Hills Pky Before 2nd Flying Cloud Dr (2227) to Dalhousie University Carleton Campus
- Herring Cove Rd Before Mcintosh St (6899) to Saint Mary's University
- Sackville Terminal to Mount Saint Vincent University
- Lakeview Shopping Centre (8909) to Hammonds Plains
- Windmill Rd After Lyle St (8127) to Dalhousie University Carleton Campus
- Gale Terr After Commodore Dr (8656) to Hammonds Plains
- Coburg Rd After Lord Dalhousie Dr (6447) to Saint Mary's University