How to get from San Paolo d'Argon to Zeccone by bus and train?

From San Paolo d'Argon to Zeccone by bus and train

To get from San Paolo d'Argon to Zeccone in Milan and Lombardy, you’ll need to take 2 bus lines and one train line: take the BS1 bus from San Paolo D'Argon - National Street, Da Vinci Street station to Sesto S. G. - 1st May Square station. Next, you’ll have to switch to the S9 train and finally take the 172 bus from Milano Romolo Station/M2 > Interchange S9 station to Zeccone - Provincial Road 205 Vigentina/Vittadini station. The total trip duration for this route is approximately 3 hr 27 min. The ride fare is €10.60.

207min€10.60
Bus - BS1BS1
Train - S9
Bus - 172172
Walk to Zeccone
Leaves from San Paolo D'Argon - National Street, Da Vinci Street

Step by Step

  • 1
    Start from bus station
    Start from bus station
    San Paolo d'Argon
  • 2
    Bus - BS1BS1
    Wait for bus
    BS1
    Sesto San Giovanni
  • 3
    Ride to bus station
    Ride to bus station
    Sesto S. G. - 1st May Square
    67 min
  • 4
    Walk to train station
    Walk to train station
    Sesto San Giovanni
    190 m • 3 min
  • 5
    Train - S9
    Wait for train
    S9
    Albairate
  • 6
    Ride to train station
    Ride to train station
    Milano Romolo
    32 min
  • 7
    Walk to bus station
    Walk to bus station
    Milano Romolo Station/M2 > Interchange S9
    70 m • 2 min
  • 8
    Bus - 172172
    Wait for bus
    172
    Pavia - Bus Station
  • 9
    Ride to bus station
    Ride to bus station
    Zeccone - Provincial Road 205 Vigentina/Vittadini
    61 min
  • 10
    Walk to Zeccone
    Walk to
    Zeccone
    320 m • 5 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Milan and Lombardy.
All local mobility options in one app

Public transit directions from San Paolo d'Argon to Zeccone

The distance between San Paolo d'Argon, Milan and Lombardy and Zeccone, Milan and Lombardy is approximately 106.9 km, which can typically be travelled in 207 min. Moovit will show you the directions from San Paolo d'Argon to Zeccone by bus and train, so no matter how you choose to travel in Milan and Lombardy – you will always have plenty of easy options.

Related Routes

Questions & Answers

  • What is the fastest way to get from San Paolo d'Argon to Zeccone?

    The fastest way takes 207 minutes, using Bus line BS1, Train line S9 Saronno - Seregno - Monza - Milan - Albairate-Vermezzo, Bus line Pavia - Bornasco - Siziano - Pieve Emanuele - Milan Romolo M2.

  • Is there a direct bus between San Paolo d'Argon and Zeccone in Milan and Lombardy?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 3 hr 27 min.

  • Which bus line goes from San Paolo d'Argon to Zeccone in Milan and Lombardy?

    The BS1 bus line goes from Sesto San Giovanni station near San Paolo d'Argon to Sesto S. G. - 1st May Square station. From there you’ll have to take one bus line and one train line till Sesto S. G. - 1st May Square station near Zeccone in Milan and Lombardy.

  • How long does it take to travel from San Paolo d'Argon to Zeccone in Milan and Lombardy by bus and train?

    The total travel time between San Paolo d'Argon and Zeccone in Milan and Lombardy by bus and train is about 3 hr 27 min.

  • Where do I get on the bus near San Paolo d'Argon to get to Zeccone in Milan and Lombardy?

    Get on the BS1 bus from the Sesto San Giovanni stop near San Paolo d'Argon in Milan and Lombardy.

  • Where do I get off the bus when travelling between San Paolo d'Argon and Zeccone in Milan and Lombardy?

    Get off the bus at the Sesto S. G. - 1st May Square stop, which is closest to Zeccone in Milan and Lombardy.

  • How much is the total bus and train fare from San Paolo d'Argon to Zeccone?

    The ride from San Paolo d'Argon to Zeccone costs €10.60.

Popular Routes