How to get from Wattle Grove to Ashby by bus and train?

By bus and train

To get from Wattle Grove to Ashby in Perth, you’ll need to take 2 bus lines and one train line: take the 283 bus from Welshpool Rd Before Hale Rd station to St Georges Tce Stand N - Before William St station. Next, you’ll have to switch to the JOONDALUP LINE train and finally take the 467 bus from Joondalup Stn station to Wanneroo Rd After Pinjar Rd station. The total trip duration for this route is approximately 1 hr 49 min. The ride fare is A$4.59.

109minA$4.59
Bus - 283283
Train - JOONDALUP LINEJOONDALUP LINE
Bus - 467467
Leaves from Welshpool Rd Before Hale Rd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Wattle Grove
  • 2
    Bus - 283283
    Wait for bus
    283
    Elizabeth Quay Bus Stn
  • 3
    Ride to bus station
    Ride to bus station
    St Georges Tce Stand N - Before William St
    ID 10088
    31 min
  • 4
    Walk to train station
    Walk to train station
    Elizabeth Quay Stn
    ID 135
    140 m • 2 min
  • 5
    Train - JOONDALUP LINEJOONDALUP LINE
    Wait for train
    JOONDALUP LINE
    Butler Stn
  • 6
    Ride to train station
    Ride to train station
    Joondalup Stn
    ID 90
    32 min
  • 7
    Bus - 467467
    Wait for bus
    467
    Whitfords Stn
  • 8
    Ride to bus station Wanneroo Rd After Pinjar Rd
    Ride to bus station
    Wanneroo Rd After Pinjar Rd
    ID 12304
    16 min
*Duration based on 8am traffic

Alternative route by bus and train via 283, JOONDALUP LINE and 468

To get from Wattle Grove to Ashby in Perth, you’ll need to take 2 bus lines and one train line: take the 283 bus from Welshpool Rd Before Hale Rd station to St Georges Tce Stand N - Before William St station. Next, you’ll have to switch to the JOONDALUP LINE train and finally take the 468 bus from Whitfords Stn station to Wanneroo Rd After Neville Dr station. The total trip duration for this route is approximately 1 hr 47 min. The ride fare is A$4.59.

107minA$4.59
Bus - 283283
Train - JOONDALUP LINEJOONDALUP LINE
Bus - 468468
Walk to Ashby
Leaves from Welshpool Rd Before Hale Rd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Wattle Grove
  • 2
    Bus - 283283
    Wait for bus
    283
    Elizabeth Quay Bus Stn
  • 3
    Ride to bus station
    Ride to bus station
    St Georges Tce Stand N - Before William St
    ID 10088
    31 min
  • 4
    Walk to train station
    Walk to train station
    Elizabeth Quay Stn
    ID 135
    140 m • 2 min
  • 5
    Train - JOONDALUP LINEJOONDALUP LINE
    Wait for train
    JOONDALUP LINE
    Butler Stn
  • 6
    Ride to train station
    Ride to train station
    Whitfords Stn
    ID 102
    25 min
  • 7
    Bus - 468468
    Wait for bus
    468
    Joondalup Stn
  • 8
    Ride to bus station
    Ride to bus station
    Wanneroo Rd After Neville Dr
    ID 12406
    14 min
  • 9
    Walk to Ashby
    Walk to
    Ashby
    120 m • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Perth.
All local mobility options in one app

Public transport directions from Wattle Grove to Ashby

The distance between Wattle Grove, Perth and Ashby, Perth is approximately 51.26 km, which can typically be travelled in 109 min. Moovit will show you the directions from Wattle Grove to Ashby by bus and train, so no matter how you choose to travel in Perth – you will always have plenty of easy options.

Public transport stations close to Wattle Grove

Wattle Grove is located at Wattle Grove, Perth and the nearest public transport station is Welshpool Rd After Hale Rd.

Bus stations close to Wattle Grove:

  • Welshpool Rd After Hale Rd
  • Hale Rd After Welshpool Rd
  • Hale Rd After Sheffield Rd

Public transport stations close to Ashby, Perth

Ashby is located at Ashby, Perth and the nearest public transport station is Wanneroo Rd After Pinjar Rd.

Train stations close to Ashby:

  • Edgewater Stn
  • Currambine Stn

Bus stations close to Ashby:

  • Wanneroo Rd After Pinjar Rd
  • Wanneroo Rd After Neville Dr
  • Wanneroo Rd Before Neville Dr

Related Routes

Alternative route by bus and train via 283, JOONDALUP LINE and 468

To get from Wattle Grove to Ashby in Perth, you’ll need to take 2 bus lines and one train line: take the 283 bus from Welshpool Rd Before Hale Rd station to St Georges Tce Stand N - Before William St station. Next, you’ll have to switch to the JOONDALUP LINE train and finally take the 468 bus from Whitfords Stn station to Wanneroo Rd After Neville Dr station. The total trip duration for this route is approximately 1 hr 47 min. The ride fare is A$4.59.

107minA$4.59
Bus - 283283
Train - JOONDALUP LINEJOONDALUP LINE
Bus - 468468
Walk to Ashby
Leaves from Welshpool Rd Before Hale Rd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Wattle Grove
  • 2
    Bus - 283283
    Wait for bus
    283
    Elizabeth Quay Bus Stn
  • 3
    Ride to bus station
    Ride to bus station
    St Georges Tce Stand N - Before William St
    ID 10088
    31 min
  • 4
    Walk to train station
    Walk to train station
    Elizabeth Quay Stn
    ID 135
    140 m • 2 min
  • 5
    Train - JOONDALUP LINEJOONDALUP LINE
    Wait for train
    JOONDALUP LINE
    Butler Stn
  • 6
    Ride to train station
    Ride to train station
    Whitfords Stn
    ID 102
    25 min
  • 7
    Bus - 468468
    Wait for bus
    468
    Joondalup Stn
  • 8
    Ride to bus station
    Ride to bus station
    Wanneroo Rd After Neville Dr
    ID 12406
    14 min
  • 9
    Walk to Ashby
    Walk to
    Ashby
    120 m • 2 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Wattle Grove to Ashby?

    The fastest way takes 109 minutes, using Bus line 283, Bus line JOONDALUP LINE, Bus line 467.

  • What is the alternative route to get from Wattle Grove to Ashby?

    The alternative route takes 107 minutes, using Bus line 283, Bus line JOONDALUP LINE, Bus line 468.

  • Is there a direct bus between Wattle Grove and Ashby in Perth?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 1 hr 49 min.

  • Which bus line goes from Wattle Grove to Ashby in Perth?

    The 283 bus line goes from Elizabeth Quay Bus Stn station near Wattle Grove to St Georges Tce Stand N - Before William St station. From there you’ll have to take one bus line and one train line till St Georges Tce Stand N - Before William St station near Ashby in Perth

  • How long does it take to travel from Wattle Grove to Ashby in Perth by bus and train?

    The total travel time between Wattle Grove and Ashby in Perth by bus and train is about 1 hr 49 min.

  • Where do I get on the bus near Wattle Grove to get to Ashby in Perth?

    Get on the 283 bus from the Elizabeth Quay Bus Stn stop near Wattle Grove in Perth.

  • Where do I get off the bus when travelling between Wattle Grove and Ashby in Perth?

    Get off the bus at the St Georges Tce Stand N - Before William St stop, which is closest to Ashby in Perth.

  • How much is the total bus and train fare from Wattle Grove to Ashby?

    The ride from Wattle Grove to Ashby costs A$4.59.

Live arrivals, timetables, maps