How to get from Melville to Butler by bus and train?
From Melville to Butler by bus and train
To get from Melville to Butler in Perth, you’ll need to take one bus line and 2 train lines: take the 910 bus from Canning Hwy Before Prinsep Rd station to Canning Bridge Stn station. Next, you’ll have to switch to the MANDURAH LINE train and finally take the JOONDALUP LINE train from Perth Underground Stn station to Butler Stn station. The total trip duration for this route is approximately 1 hr 10 min. The ride fare is A$4.59.
Step by Step
- 1Start from bus stationMelville
- 2Wait for bus910Perth Busport
- 3Ride to bus stationCanning Bridge StnID 8311 min
- 4Wait for trainMANDURAH LINEPerth Underground Stn
- 5Ride to train stationPerth Underground StnID 647 min
- 6Wait for trainJOONDALUP LINEButler Stn
- 7Ride to train stationButler StnID 13338 min
Alternative route from Melville to Butler by bus and train via 910 and JOONDALUP LINE
To get from Melville to Butler in Perth, take the 910 bus from Canning Hwy Before Prinsep Rd station to St Georges Tce Before Howard St Westbound station. Next, take the JOONDALUP LINE train from Perth Underground Stn station to Butler Stn station. The total trip duration for this route is approximately 1 hr 25 min. The ride fare is A$4.59.
Step by Step
- 1Start from bus stationMelville
- 2Wait for bus910Perth Busport
- 3Ride to bus stationSt Georges Tce Before Howard St WestboundID 11236 min
- 4Walk to train stationPerth Underground StnID 64590 m • 7 min
- 5Wait for trainJOONDALUP LINEButler Stn
- 6Ride to train stationButler StnID 13338 min
Public transport directions from Melville to Butler
Public transport stations close to Melville
Melville is located at Melville, Perth and the nearest public transport station is Canning Hwy After Moreing Rd.
Bus stations close to Melville:
- Canning Hwy After Moreing Rd
- Canning Hwy After Preston Point Rd
- Canning Hwy Before Moreing Rd
Public transport stations close to Butler, Perth
Butler is located at Butler, Perth and the nearest public transport station is Butler Stn.
Bus stations close to Butler:
- Butler Stn
- Butler Bvd After Camborne Pwy
- Mansfield Av After Benfleet Dr
Related Routes
- Applecross to Butler
- Ashfield to Butler
- Balga to Butler
- Banksia Grove to Butler
- Bayswater to Butler
- Beckenham to Butler
- Bentley to Butler
- Bertram to Butler
- Booragoon to Butler
- Bull Creek to Butler
- Burns Beach to Butler
- Busselton to Butler
- Carabooda to Butler
- Carramar to Butler
- Claremont to Butler
- Clarkson to Butler
- Coogee to Butler
- Currambine to Butler
- Dianella to Butler
- Duncraig to Butler
Alternative route from Melville to Butler by bus and train via 910 and JOONDALUP LINE
To get from Melville to Butler in Perth, take the 910 bus from Canning Hwy Before Prinsep Rd station to St Georges Tce Before Howard St Westbound station. Next, take the JOONDALUP LINE train from Perth Underground Stn station to Butler Stn station. The total trip duration for this route is approximately 1 hr 25 min. The ride fare is A$4.59.
Step by Step
- 1Start from bus stationMelville
- 2Wait for bus910Perth Busport
- 3Ride to bus stationSt Georges Tce Before Howard St WestboundID 11236 min
- 4Walk to train stationPerth Underground StnID 64590 m • 7 min
- 5Wait for trainJOONDALUP LINEButler Stn
- 6Ride to train stationButler StnID 13338 min
Questions & Answers
What is the fastest way to get from Melville to Butler?
The fastest way takes 70 minutes, using Bus line 910, Bus line MANDURAH LINE, Bus line JOONDALUP LINE.
What is the alternative route to get from Melville to Butler?
The alternative route takes 85 minutes, using Bus line 910, Bus line JOONDALUP LINE.
Is there a direct bus between Melville and Butler in Perth?
No, you’ll have to take one bus line and 2 train lines in total. The total travelling time is 1 hr 10 min.
Which bus line goes from Melville to Butler in Perth?
The 910 bus line goes from Perth Busport station near Melville to Canning Bridge Stn station. From there you’ll have to take 2 train lines till Canning Bridge Stn station near Butler in Perth
How long does it take to travel from Melville to Butler in Perth by bus and train?
The total travel time between Melville and Butler in Perth by bus and train is about 1 hr 10 min.
Where do I get on the bus near Melville to get to Butler in Perth?
Get on the 910 bus from the Perth Busport stop near Melville in Perth.
Where do I get off the bus when travelling between Melville and Butler in Perth?
Get off the bus at the Canning Bridge Stn station, which is closest to Butler in Perth.
How much is the bus fare from Melville to Butler?
The ride from Melville to Butler costs A$4.59.