How to get from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal by bus and train?

From Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal by bus and train

To get from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne, you’ll need to take 2 train lines and one bus line: take the PAKENHAM train from Flagstaff station to Caulfield station. Next, you’ll have to switch to the PAKENHAM train and finally take the 890 bus from Dandenong Station/Foster St (Dandenong) station to Soccio Pl/Abbotts Rd (Dandenong South) station. The total trip duration for this route is approximately 2 hr 12 min. The ride fare is A$5.30.

132minA$5.30
Walk to train stationTrain - PAKENHAM
PAKENHAM
Train - PAKENHAM
PAKENHAM
Bus - 890
890
Leaves from Flagstaff

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Flagstaff
    520 m • 7 min
  • 2
    Train - PAKENHAMPAKENHAM
    Wait for train
    PAKENHAM
    Pakenham
  • 3
    Ride to train station
    Ride to train station
    Caulfield
    27 min
  • 4
    Train - PAKENHAMPAKENHAM
    Wait for train
    PAKENHAM
    Pakenham
  • 5
    Ride to train station
    Ride to train station
    Dandenong
    45 min
  • 6
    Walk to bus station
    Walk to bus station
    Dandenong Station/Foster St (Dandenong)
    ID 51295
    150 m • 3 min
  • 7
    Bus - 890890
    Wait for bus
    890
    Lynbrook Station
  • 8
    Ride to bus station Soccio Pl/Abbotts Rd (Dandenong South)
    Ride to bus station
    Soccio Pl/Abbotts Rd (Dandenong South)
    ID 51271
    17 min
*Duration based on 8am traffic

Alternative route from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal by bus and train via LILYDALE, FRANKSTON and 901

To get from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne, you’ll need to take 2 train lines and one bus line: take the LILYDALE train from Melbourne Central station to Richmond station. Next, you’ll have to switch to the FRANKSTON train and finally take the 901 bus from Kananook Station/Wells Rd (Seaford) station to Abbotts Rd/Frankston-Dandenong Rd (Dandenong South) station. The total trip duration for this route is approximately 2 hr 13 min. The ride fare is A$5.30.

133minA$5.30
Walk to train stationTrain - LILYDALE
LILYDALE
Train - FRANKSTON
FRANKSTON
Bus - 901
901
Walk to Dandenong South - Bal
Leaves from Melbourne Central

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Melbourne Central
    370 m • 5 min
  • 2
    Train - LILYDALELILYDALE
    Wait for train
    LILYDALE
    Lilydale
  • 3
    Ride to train station
    Ride to train station
    Richmond
    6 min
  • 4
    Train - FRANKSTONFRANKSTON
    Wait for train
    FRANKSTON
    Frankston
  • 5
    Ride to train station
    Ride to train station
    Kananook
    59 min
  • 6
    Walk to bus station
    Walk to bus station
    Kananook Station/Wells Rd (Seaford)
    ID 10696
    30 m • 1 min
  • 7
    Bus - 901901
    Wait for bus
    901
    Melbourne Airport
  • 8
    Ride to bus station
    Ride to bus station
    Abbotts Rd/Frankston-Dandenong Rd (Dandenong South)
    ID 2951
    16 min
  • 9
    Walk to Dandenong South - Bal
    Walk to
    Dandenong South - Bal
    2.03 km • 26 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal

The distance between Hardware St/Lonsdale St (Melbourne City), Melbourne and Dandenong South - Bal, Melbourne is approximately 42.3 km, which can typically be travelled in 132 min. Moovit will show you the directions from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal by bus and train, so no matter how you choose to travel in Melbourne – you will always have plenty of easy options.

Public transport stations close to Hardware St/Lonsdale St (Melbourne City)

Hardware St/Lonsdale St (Melbourne City) is located at Hardware St/Lonsdale St (Melbourne City), Melbourne and the nearest public transport station is Lonsdale St/Queen St (Melbourne City).

Bus stations close to Hardware St/Lonsdale St (Melbourne City):

  • Lonsdale St/Queen St (Melbourne City)
  • Queen St/Lonsdale St (Melbourne City)
  • Little Bourke St/Queen St (Melbourne City)

Public transport stations close to Dandenong South - Bal, Melbourne

Dandenong South - Bal is located at Dandenong South - Bal, Melbourne and the nearest public transport station is Soccio Pl/Abbotts Rd (Dandenong South).

Train stations close to Dandenong South - Bal:

  • Lynbrook
  • Hallam

Bus stations close to Dandenong South - Bal:

  • Soccio Pl/Abbotts Rd (Dandenong South)
  • National Dr/Abbotts Rd (Dandenong South)
  • Taylors Rd/Abbotts Rd (Dandenong South)

Related Routes

Alternative route from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal by bus and train via LILYDALE, FRANKSTON and 901

To get from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne, you’ll need to take 2 train lines and one bus line: take the LILYDALE train from Melbourne Central station to Richmond station. Next, you’ll have to switch to the FRANKSTON train and finally take the 901 bus from Kananook Station/Wells Rd (Seaford) station to Abbotts Rd/Frankston-Dandenong Rd (Dandenong South) station. The total trip duration for this route is approximately 2 hr 13 min. The ride fare is A$5.30.

133minA$5.30
Walk to train stationTrain - LILYDALE
LILYDALE
Train - FRANKSTON
FRANKSTON
Bus - 901
901
Walk to Dandenong South - Bal
Leaves from Melbourne Central

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Melbourne Central
    370 m • 5 min
  • 2
    Train - LILYDALELILYDALE
    Wait for train
    LILYDALE
    Lilydale
  • 3
    Ride to train station
    Ride to train station
    Richmond
    6 min
  • 4
    Train - FRANKSTONFRANKSTON
    Wait for train
    FRANKSTON
    Frankston
  • 5
    Ride to train station
    Ride to train station
    Kananook
    59 min
  • 6
    Walk to bus station
    Walk to bus station
    Kananook Station/Wells Rd (Seaford)
    ID 10696
    30 m • 1 min
  • 7
    Bus - 901901
    Wait for bus
    901
    Melbourne Airport
  • 8
    Ride to bus station
    Ride to bus station
    Abbotts Rd/Frankston-Dandenong Rd (Dandenong South)
    ID 2951
    16 min
  • 9
    Walk to Dandenong South - Bal
    Walk to
    Dandenong South - Bal
    2.03 km • 26 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal?

    The fastest way takes 132 minutes, using Bus line PAKENHAM, Bus line PAKENHAM, Bus line 890.

  • What is the alternative route to get from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal?

    The alternative route takes 133 minutes, using Bus line LILYDALE, Bus line FRANKSTON, Bus line 901.

  • Is there a direct train between Hardware St/Lonsdale St (Melbourne City) and Dandenong South - Bal in Melbourne?

    No, you’ll have to take 2 train lines and one bus line in total. The total travelling time is 2 hr 12 min.

  • Which train line goes from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne?

    The PAKENHAM train line goes from Flagstaff station near Hardware St/Lonsdale St (Melbourne City) to Pakenham station. From there you’ll have to take one train line and one bus line till Pakenham station near Dandenong South - Bal in Melbourne

  • How long does it take to travel from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne by train and bus?

    The total travel time between Hardware St/Lonsdale St (Melbourne City) and Dandenong South - Bal in Melbourne by train and bus is about 2 hr 12 min.

  • Where do I get on the train near Hardware St/Lonsdale St (Melbourne City) to get to Dandenong South - Bal in Melbourne?

    Get on the PAKENHAM train from the Flagstaff station near Hardware St/Lonsdale St (Melbourne City) in Melbourne.

  • Where do I get off the train when travelling between Hardware St/Lonsdale St (Melbourne City) and Dandenong South - Bal in Melbourne?

    Get off the train at the Pakenham stop, which is closest to Dandenong South - Bal in Melbourne.

  • When is the last train from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne?

    The last train from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal in Melbourne is the Cranbourne - City (Flinders Street) line. It leaves the Melbourne Central station at 17:56.

  • How much is the total train and bus fare from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal?

    The ride from Hardware St/Lonsdale St (Melbourne City) to Dandenong South - Bal costs A$5.30.

Live arrivals, timetables, maps