How to get from Belgrave Heights to Highton by bus and train?
From Belgrave Heights to Highton by bus and train
To get from Belgrave Heights to Highton in Melbourne, you’ll need to take one bus line and 2 train lines: take the 697 bus from The Crescent/Colby Dr (Belgrave Heights) station to Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station. Next, you’ll have to switch to the BELGRAVE train and finally take the GEELONG - MELBOURNE VIA GEELONG train from Southern Cross station to Waurn Ponds station. The total trip duration for this route is approximately 3 hr 39 min. The ride fare is A$13.84.
Step by Step
- 1Start from bus stationBelgrave Heights
- 2Wait for bus697Belgrave
- 3Ride to bus stationBelgrave Station/Belgrave-Gembrook Rd (Belgrave)ID 195837 min
- 4Walk to train stationBelgrave20 m • 1 min
- 5Wait for trainBELGRAVECity (Flinders Street)
- 6Ride to train stationSouthern Cross60 min
- 7Wait for trainGEELONG - MELBOURNE VIA GEELONGGeelong
- 8Ride to train stationWaurn Ponds76 min
- 9Walk toHighton3.03 km • 39 min
Public transport directions from Belgrave Heights to Highton
Public transport stations close to Belgrave Heights
Belgrave Heights is located at Belgrave Heights, Melbourne and the nearest public transport station is Harvey St/Colby Dr (Belgrave Heights).
Train stations close to Belgrave Heights:
- Belgrave
- Tecoma
- Upwey
Bus stations close to Belgrave Heights:
- Harvey St/Colby Dr (Belgrave Heights)
- Old Reservoir Rd/Belgrave - Hallam Rd (Belgrave)
- Hardham St/Belgrave-Hallam Rd (Belgrave)
Public transport stations close to Highton, Melbourne
Highton is located at Highton, Melbourne and the nearest public transport station is Epworth Hospital/Pigdons Rd (Highton).
Train stations close to Highton:
- Waurn Ponds
- Marshall
Bus stations close to Highton:
- Epworth Hospital/Pigdons Rd (Highton)
- Rtc Resource Centre/Pigdons Rd (Highton)
- Spedding Link/Pigdons Rd (Highton)
Related Routes
- Altona North to Highton
- Beaconsfield Upper to Highton
- Boronia to Highton
- Burnside to Highton
- Burwood East to Highton
- Buxton to Highton
- Eildon to Highton
- Keilor North to Highton
- Kingsville to Highton
- Marysville to Highton
- Narbethong to Highton
- Narre Warren East to Highton
- Ringwood East to Highton
- Rye to Highton
- Taggerty to Highton
- Tarneit to Highton
- Thornton to Highton
- Toolern Vale to Highton
- Travancore to Highton
- Vermont to Highton
Questions & Answers
What is the fastest way to get from Belgrave Heights to Highton?
The fastest way takes 219 minutes, using Bus line 697, Bus line BELGRAVE, Bus line GEELONG - MELBOURNE VIA GEELONG.
Is there a direct bus between Belgrave Heights and Highton in Melbourne?
No, you’ll have to take one bus line and 2 train lines in total. The total travelling time is 3 hr 39 min.
Which bus line goes from Belgrave Heights to Highton in Melbourne?
The 697 bus line goes from Belgrave station near Belgrave Heights to Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station. From there you’ll have to take 2 train lines till Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station near Highton in Melbourne
How long does it take to travel from Belgrave Heights to Highton in Melbourne by bus and train?
The total travel time between Belgrave Heights and Highton in Melbourne by bus and train is about 3 hr 39 min.
Where do I get on the bus near Belgrave Heights to get to Highton in Melbourne?
Get on the 697 bus from the Belgrave stop near Belgrave Heights in Melbourne.
Where do I get off the bus when travelling between Belgrave Heights and Highton in Melbourne?
Get off the bus at the Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station, which is closest to Highton in Melbourne.
How much is the bus fare from Belgrave Heights to Highton?
The ride from Belgrave Heights to Highton costs A$13.84.