Skip to main content

How to get from Melbourne Airport to Hillside (Melton) by bus and train?

By bus and train

To get from Melbourne Airport to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the MELBOURNE CITY EXPRESS bus from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport) station to Skybus Coach Terminal/Spencer St (Melbourne City) station. Next, you’ll have to switch to the SUNBURY train and finally take the 463 bus from Watergardens Station/Watergardens Circuit Rd (Taylors Lakes) station to Sunningdale Dr/Sanctuary Rd (Hillside) station. The total trip duration for this route is approximately 1 hr 26 min. The ride fare is A$25.05.

86minA$25.05
Walk to bus stationBus - MELBOURNE CITY EXPRESS
MELBOURNE CITY EXPRESS
Train - SUNBURY
SUNBURY
Bus - 463
463
Walk to Hillside (Melton)
Leaves from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport)

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport)
    ID 45511
    30 m • 1 min
  • 2
    Bus - MELBOURNE CITY EXPRESSMELBOURNE CITY EXPRESS
    Wait for bus
    MELBOURNE CITY EXPRESS
    City
  • 3
    Ride to bus station
    Ride to bus station
    Skybus Coach Terminal/Spencer St (Melbourne City)
    ID 23175
    23 min
  • 4
    Walk to train station
    Walk to train station
    Southern Cross
    130 m • 2 min
  • 5
    Train - SUNBURYSUNBURY
    Wait for train
    SUNBURY
    Sunbury
  • 6
    Ride to train station
    Ride to train station
    Watergardens
    32 min
  • 7
    Walk to bus station
    Walk to bus station
    Watergardens Station/Watergardens Circuit Rd (Taylors Lakes)
    ID 23278
    40 m • 1 min
  • 8
    Bus - 463463
    Wait for bus
    463
    Hillside
  • 9
    Ride to bus station
    Ride to bus station
    Sunningdale Dr/Sanctuary Rd (Hillside)
    ID 46759
    14 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    210 m • 3 min
*Duration based on 8am traffic

Alternative route by bus and train via MELBOURNE CITY EXPRESS, SUNBURY and 460

To get from Melbourne Airport to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the MELBOURNE CITY EXPRESS bus from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport) station to Skybus Coach Terminal/Spencer St (Melbourne City) station. Next, you’ll have to switch to the SUNBURY train and finally take the 460 bus from Watergardens Station/Watergardens Circuit Rd (Taylors Lakes) station to Panorama Dr/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is A$25.05.

89minA$25.05
Walk to bus stationBus - MELBOURNE CITY EXPRESS
MELBOURNE CITY EXPRESS
Train - SUNBURY
SUNBURY
Bus - 460
460
Walk to Hillside (Melton)
Leaves from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport)

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport)
    ID 45511
    30 m • 1 min
  • 2
    Bus - MELBOURNE CITY EXPRESSMELBOURNE CITY EXPRESS
    Wait for bus
    MELBOURNE CITY EXPRESS
    City
  • 3
    Ride to bus station
    Ride to bus station
    Skybus Coach Terminal/Spencer St (Melbourne City)
    ID 23175
    23 min
  • 4
    Walk to train station
    Walk to train station
    Southern Cross
    130 m • 2 min
  • 5
    Train - SUNBURYSUNBURY
    Wait for train
    SUNBURY
    Sunbury
  • 6
    Ride to train station
    Ride to train station
    Watergardens
    32 min
  • 7
    Walk to bus station
    Walk to bus station
    Watergardens Station/Watergardens Circuit Rd (Taylors Lakes)
    ID 47644
    80 m • 2 min
  • 8
    Bus - 460460
    Wait for bus
    460
    Caroline Springs Station
  • 9
    Ride to bus station
    Ride to bus station
    Panorama Dr/Melton Hwy (Hillside)
    ID 9919
    4 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    1.3 km • 17 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Melbourne Airport to Hillside (Melton)

The distance between Melbourne Airport, Melbourne and Hillside (Melton), Melbourne is approximately 52.43 km, which can typically be travelled in 86 min. Moovit will show you the directions from Melbourne Airport to Hillside (Melton) by bus and train, so no matter how you choose to travel in Melbourne – you will always have plenty of easy options.

Public transport stations close to Melbourne Airport

Melbourne Airport is located at Melbourne Airport, Melbourne and the nearest public transport station is Melbourne Airport/Grants Rd (Melbourne Airport).

Bus stations close to Melbourne Airport:

  • Melbourne Airport/Grants Rd (Melbourne Airport)
  • Melbourne Airport T4 Skybus/Service Rd (Melbourne Airport)
  • Melbourne Airport T3 Skybus/Arrival Dr (Melbourne Airport)

Public transport stations close to Hillside (Melton), Melbourne

Hillside (Melton) is located at Hillside (Melton), Melbourne and the nearest public transport station is Sunningdale Dr/Sanctuary Rd (Hillside).

Train stations close to Hillside (Melton):

  • Watergardens

Bus stations close to Hillside (Melton):

  • Sunningdale Dr/Sanctuary Rd (Hillside)
  • King Dr/The Regency (Hillside)
  • Sanctuary Rd/Beattys Rd (Hillside)

Alternative route by bus and train via MELBOURNE CITY EXPRESS, SUNBURY and 460

To get from Melbourne Airport to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the MELBOURNE CITY EXPRESS bus from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport) station to Skybus Coach Terminal/Spencer St (Melbourne City) station. Next, you’ll have to switch to the SUNBURY train and finally take the 460 bus from Watergardens Station/Watergardens Circuit Rd (Taylors Lakes) station to Panorama Dr/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is A$25.05.

89minA$25.05
Walk to bus stationBus - MELBOURNE CITY EXPRESS
MELBOURNE CITY EXPRESS
Train - SUNBURY
SUNBURY
Bus - 460
460
Walk to Hillside (Melton)
Leaves from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport)

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport)
    ID 45511
    30 m • 1 min
  • 2
    Bus - MELBOURNE CITY EXPRESSMELBOURNE CITY EXPRESS
    Wait for bus
    MELBOURNE CITY EXPRESS
    City
  • 3
    Ride to bus station
    Ride to bus station
    Skybus Coach Terminal/Spencer St (Melbourne City)
    ID 23175
    23 min
  • 4
    Walk to train station
    Walk to train station
    Southern Cross
    130 m • 2 min
  • 5
    Train - SUNBURYSUNBURY
    Wait for train
    SUNBURY
    Sunbury
  • 6
    Ride to train station
    Ride to train station
    Watergardens
    32 min
  • 7
    Walk to bus station
    Walk to bus station
    Watergardens Station/Watergardens Circuit Rd (Taylors Lakes)
    ID 47644
    80 m • 2 min
  • 8
    Bus - 460460
    Wait for bus
    460
    Caroline Springs Station
  • 9
    Ride to bus station
    Ride to bus station
    Panorama Dr/Melton Hwy (Hillside)
    ID 9919
    4 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    1.3 km • 17 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Melbourne Airport to Hillside (Melton)?

    The fastest way takes 86 minutes, using Bus line MELBOURNE CITY EXPRESS, Bus line SUNBURY, Bus line 463.

  • What is the alternative route to get from Melbourne Airport to Hillside (Melton)?

    The alternative route takes 89 minutes, using Bus line MELBOURNE CITY EXPRESS, Bus line SUNBURY, Bus line 460.

  • Is there a direct bus between Melbourne Airport and Hillside (Melton) in Melbourne?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 1 hr 26 min.

  • Which bus line goes from Melbourne Airport to Hillside (Melton) in Melbourne?

    The MELBOURNE CITY EXPRESS bus line goes from Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport) station near Melbourne Airport to City station. From there you’ll have to take one bus line and one train line till City station near Hillside (Melton) in Melbourne

  • How long does it take to travel from Melbourne Airport to Hillside (Melton) in Melbourne by bus and train?

    The total travel time between Melbourne Airport and Hillside (Melton) in Melbourne by bus and train is about 1 hr 26 min.

  • Where do I get on the bus near Melbourne Airport to get to Hillside (Melton) in Melbourne?

    Get on the MELBOURNE CITY EXPRESS bus from the Melbourne Airport T1 Skybus/Arrival Dr (Melbourne Airport) stop near Melbourne Airport in Melbourne.

  • Where do I get off the bus when travelling between Melbourne Airport and Hillside (Melton) in Melbourne?

    Get off the bus at the City stop, which is closest to Hillside (Melton) in Melbourne.

  • How much is the total bus and train fare from Melbourne Airport to Hillside (Melton)?

    The ride from Melbourne Airport to Hillside (Melton) costs A$25.05.

Live arrivals, timetables, maps