How to get from Invermay Park to Hillside (Melton) by bus and train?

From Invermay Park to Hillside (Melton) by bus and train

To get from Invermay Park to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the 10 bus from Club Cres/Norman St (Invermay Park) station to Ballarat Bus Interchange (Soldiers Hill) station. Next, you’ll have to switch to the BALLARAT-WENDOUREE - MELBOURNE VIA MELTON train and finally take the 460 bus from Caroline Springs Station/Christies Rd (Ravenhall) station to Gourlay Rd/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 2 hr 58 min. The ride fare is A$15.82.

178minA$15.82
Bus - 10
10
Train - BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
Bus - 460
460
Walk to Hillside (Melton)
Leaves from Club Cres/Norman St (Invermay Park)

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Invermay Park
  • 2
    Bus - 1010
    Wait for bus
    10
    Ballarat Station
  • 3
    Ride to bus station
    Ride to bus station
    Ballarat Bus Interchange (Soldiers Hill)
    ID 49020
    18 min
  • 4
    Walk to train station
    Walk to train station
    Ballarat Station
    340 m • 5 min
  • 5
    Train - BALLARAT-WENDOUREE - MELBOURNE VIA MELTONBALLARAT-WENDOUREE - MELBOURNE VIA MELTON
    Wait for train
    BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
    Melbourne
  • 6
    Ride to train station
    Ride to train station
    Caroline Springs
    61 min
  • 7
    Walk to bus station
    Walk to bus station
    Caroline Springs Station/Christies Rd (Ravenhall)
    ID 51389
    220 m • 3 min
  • 8
    Bus - 460460
    Wait for bus
    460
    Watergardens Railway Station
  • 9
    Ride to bus station
    Ride to bus station
    Gourlay Rd/Melton Hwy (Hillside)
    ID 7840
    16 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    1.16 km • 15 min
*Duration based on 8am traffic

Alternative route from Invermay Park to Hillside (Melton) by bus and train via 14, BALLARAT-WENDOUREE - MELBOURNE VIA MELTON and 460

To get from Invermay Park to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the 14 bus from Howitt St/Havelock St (Ballarat North) station to Ballarat Bus Interchange (Soldiers Hill) station. Next, you’ll have to switch to the BALLARAT-WENDOUREE - MELBOURNE VIA MELTON train and finally take the 460 bus from Caroline Springs Station/Christies Rd (Ravenhall) station to Gourlay Rd/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 3 hr 11 min. The ride fare is A$15.82.

191minA$15.82
Walk to bus stationBus - 14
14
Train - BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
Bus - 460
460
Walk to Hillside (Melton)
Leaves from Howitt St/Havelock St (Ballarat North)

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Howitt St/Havelock St (Ballarat North)
    ID 35342
    1.73 km • 23 min
  • 2
    Bus - 1414
    Wait for bus
    14
    Ballarat Station
  • 3
    Ride to bus station
    Ride to bus station
    Ballarat Bus Interchange (Soldiers Hill)
    ID 49020
    16 min
  • 4
    Walk to train station
    Walk to train station
    Ballarat Station
    340 m • 5 min
  • 5
    Train - BALLARAT-WENDOUREE - MELBOURNE VIA MELTONBALLARAT-WENDOUREE - MELBOURNE VIA MELTON
    Wait for train
    BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
    Melbourne
  • 6
    Ride to train station
    Ride to train station
    Caroline Springs
    61 min
  • 7
    Walk to bus station
    Walk to bus station
    Caroline Springs Station/Christies Rd (Ravenhall)
    ID 51389
    220 m • 3 min
  • 8
    Bus - 460460
    Wait for bus
    460
    Watergardens Railway Station
  • 9
    Ride to bus station
    Ride to bus station
    Gourlay Rd/Melton Hwy (Hillside)
    ID 7840
    16 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    1.16 km • 15 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Invermay Park to Hillside (Melton)

The distance between Invermay Park, Melbourne and Hillside (Melton), Melbourne is approximately 108.72 km, which can typically be travelled in 178 min. Moovit will show you the directions from Invermay Park to Hillside (Melton) by bus and train, so no matter how you choose to travel in Melbourne – you will always have plenty of easy options.

Public transport stations close to Invermay Park

Invermay Park is located at Invermay Park, Melbourne and the nearest public transport station is Cdc Ballarat/Norman St (Invermay Park).

Train stations close to Invermay Park:

  • Wendouree
  • Ballarat Station

Bus stations close to Invermay Park:

  • Cdc Ballarat/Norman St (Invermay Park)
  • Cdc Ballarat/Norman St (Ballarat North)
  • Norman St/Doveton St N (Ballarat North)

Public transport stations close to Hillside (Melton), Melbourne

Hillside (Melton) is located at Hillside (Melton), Melbourne and the nearest public transport station is Sunningdale Dr/Sanctuary Rd (Hillside).

Train stations close to Hillside (Melton):

  • Watergardens

Bus stations close to Hillside (Melton):

  • Sunningdale Dr/Sanctuary Rd (Hillside)
  • King Dr/The Regency (Hillside)
  • Sanctuary Rd/Beattys Rd (Hillside)

Related Routes

Alternative route from Invermay Park to Hillside (Melton) by bus and train via 14, BALLARAT-WENDOUREE - MELBOURNE VIA MELTON and 460

To get from Invermay Park to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the 14 bus from Howitt St/Havelock St (Ballarat North) station to Ballarat Bus Interchange (Soldiers Hill) station. Next, you’ll have to switch to the BALLARAT-WENDOUREE - MELBOURNE VIA MELTON train and finally take the 460 bus from Caroline Springs Station/Christies Rd (Ravenhall) station to Gourlay Rd/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 3 hr 11 min. The ride fare is A$15.82.

191minA$15.82
Walk to bus stationBus - 14
14
Train - BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
Bus - 460
460
Walk to Hillside (Melton)
Leaves from Howitt St/Havelock St (Ballarat North)

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Howitt St/Havelock St (Ballarat North)
    ID 35342
    1.73 km • 23 min
  • 2
    Bus - 1414
    Wait for bus
    14
    Ballarat Station
  • 3
    Ride to bus station
    Ride to bus station
    Ballarat Bus Interchange (Soldiers Hill)
    ID 49020
    16 min
  • 4
    Walk to train station
    Walk to train station
    Ballarat Station
    340 m • 5 min
  • 5
    Train - BALLARAT-WENDOUREE - MELBOURNE VIA MELTONBALLARAT-WENDOUREE - MELBOURNE VIA MELTON
    Wait for train
    BALLARAT-WENDOUREE - MELBOURNE VIA MELTON
    Melbourne
  • 6
    Ride to train station
    Ride to train station
    Caroline Springs
    61 min
  • 7
    Walk to bus station
    Walk to bus station
    Caroline Springs Station/Christies Rd (Ravenhall)
    ID 51389
    220 m • 3 min
  • 8
    Bus - 460460
    Wait for bus
    460
    Watergardens Railway Station
  • 9
    Ride to bus station
    Ride to bus station
    Gourlay Rd/Melton Hwy (Hillside)
    ID 7840
    16 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    1.16 km • 15 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Invermay Park to Hillside (Melton)?

    The fastest way takes 178 minutes, using Bus line 10, Bus line BALLARAT-WENDOUREE - MELBOURNE VIA MELTON, Bus line 460.

  • What is the alternative route to get from Invermay Park to Hillside (Melton)?

    The alternative route takes 191 minutes, using Bus line 14, Bus line BALLARAT-WENDOUREE - MELBOURNE VIA MELTON, Bus line 460.

  • Is there a direct bus between Invermay Park and Hillside (Melton) in Melbourne?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 2 hr 58 min.

  • Which bus line goes from Invermay Park to Hillside (Melton) in Melbourne?

    The 10 bus line goes from Ballarat Station station near Invermay Park to Ballarat Bus Interchange (Soldiers Hill) station. From there you’ll have to take one bus line and one train line till Ballarat Bus Interchange (Soldiers Hill) station near Hillside (Melton) in Melbourne

  • How long does it take to travel from Invermay Park to Hillside (Melton) in Melbourne by bus and train?

    The total travel time between Invermay Park and Hillside (Melton) in Melbourne by bus and train is about 2 hr 58 min.

  • Where do I get on the bus near Invermay Park to get to Hillside (Melton) in Melbourne?

    Get on the 10 bus from the Ballarat Station stop near Invermay Park in Melbourne.

  • Where do I get off the bus when travelling between Invermay Park and Hillside (Melton) in Melbourne?

    Get off the bus at the Ballarat Bus Interchange (Soldiers Hill) stop, which is closest to Hillside (Melton) in Melbourne.

  • How much is the total bus and train fare from Invermay Park to Hillside (Melton)?

    The ride from Invermay Park to Hillside (Melton) costs A$15.82.

Live arrivals, timetables, maps