How to get from Navarre to Hillside (Melton) by bus and train?

From Navarre to Hillside (Melton) by bus and train

To get from Navarre to Hillside (Melton) in Melbourne, you’ll need to take 2 bus lines and one train line: take the STAWELL - ST ARNAUD VIA ARARAT bus from General Store/Ararat - St Arnaud Rd (Navarre) station to Ararat Railway Station (Ararat) station. Next, you’ll have to switch to the ARARAT - MELBOURNE VIA BALLARAT train and finally take the 460 bus from Caroline Springs Station/Christies Rd (Ravenhall) station to Gourlay Rd/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 4 hr 56 min. The ride fare is A$19.12.

296minA$19.12
Bus - STAWELL - ST ARNAUD VIA ARARAT
STAWELL - ST ARNAUD VIA ARARAT
Train - ARARAT - MELBOURNE VIA BALLARAT
ARARAT - MELBOURNE VIA BALLARAT
Bus - 460
460
Walk to Hillside (Melton)
Leaves from General Store/Ararat - St Arnaud Rd (Navarre)

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Navarre
  • 2
    Bus - STAWELL - ST ARNAUD VIA ARARATSTAWELL - ST ARNAUD VIA ARARAT
    Wait for bus
    STAWELL - ST ARNAUD VIA ARARAT
    Stawell
  • 3
    Ride to bus station
    Ride to bus station
    Ararat Railway Station (Ararat)
    ID 17799
    50 min
  • 4
    Walk to train station
    Walk to train station
    Ararat
    20 m • 1 min
  • 5
    Train - ARARAT - MELBOURNE VIA BALLARATARARAT - MELBOURNE VIA BALLARAT
    Wait for train
    ARARAT - MELBOURNE VIA BALLARAT
    Melbourne
  • 6
    Ride to train station
    Ride to train station
    Caroline Springs
    115 min
  • 7
    Walk to bus station
    Walk to bus station
    Caroline Springs Station/Christies Rd (Ravenhall)
    ID 51389
    220 m • 3 min
  • 8
    Bus - 460460
    Wait for bus
    460
    Watergardens Railway Station
  • 9
    Ride to bus station
    Ride to bus station
    Gourlay Rd/Melton Hwy (Hillside)
    ID 7840
    18 min
  • 10
    Walk to Hillside (Melton)
    Walk to
    Hillside (Melton)
    1.16 km • 15 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Navarre to Hillside (Melton)

The distance between Navarre, Melbourne and Hillside (Melton), Melbourne is approximately 250.8 km, which can typically be travelled in 296 min. Moovit will show you the directions from Navarre to Hillside (Melton) by bus and train, so no matter how you choose to travel in Melbourne – you will always have plenty of easy options.

Public transport stations close to Hillside (Melton), Melbourne

Hillside (Melton) is located at Hillside (Melton), Melbourne and the nearest public transport station is Pilgrim Dr/Wattle Valley Dr (Hillside).

Train stations close to Hillside (Melton):

  • Watergardens

Bus stations close to Hillside (Melton):

  • Pilgrim Dr/Wattle Valley Dr (Hillside)
  • The Regency/Wattle Valley Dr (Hillside)
  • James Ct/Wattle Valley Dr (Hillside)

Related Routes

Questions & Answers

  • What is the fastest way to get from Navarre to Hillside (Melton)?

    The fastest way takes 296 minutes, using Bus line STAWELL - ST ARNAUD VIA ARARAT, Bus line ARARAT - MELBOURNE VIA BALLARAT, Bus line 460.

  • Is there a direct bus between Navarre and Hillside (Melton) in Melbourne?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 4 hr 56 min.

  • Which bus line goes from Navarre to Hillside (Melton) in Melbourne?

    The STAWELL - ST ARNAUD VIA ARARAT bus line goes from Stawell station near Navarre to Ararat Railway Station (Ararat) station. From there you’ll have to take one bus line and one train line till Ararat Railway Station (Ararat) station near Hillside (Melton) in Melbourne

  • How long does it take to travel from Navarre to Hillside (Melton) in Melbourne by bus and train?

    The total travel time between Navarre and Hillside (Melton) in Melbourne by bus and train is about 4 hr 56 min.

  • Where do I get on the bus near Navarre to get to Hillside (Melton) in Melbourne?

    Get on the STAWELL - ST ARNAUD VIA ARARAT bus from the Stawell stop near Navarre in Melbourne.

  • Where do I get off the bus when travelling between Navarre and Hillside (Melton) in Melbourne?

    Get off the bus at the Ararat Railway Station (Ararat) stop, which is closest to Hillside (Melton) in Melbourne.

  • How much is the total bus and train fare from Navarre to Hillside (Melton)?

    The ride from Navarre to Hillside (Melton) costs A$19.12.

Live arrivals, timetables, maps