How to get from Tapping to Langford by bus and train?

From Tapping to Langford by bus and train

To get from Tapping to Langford in Perth, you’ll need to take 2 bus lines and one train line: take the 467 bus from Joondalup Dr After Cheriton Dr station to Joondalup Stn station. Next, you’ll have to switch to the JOONDALUP LINE train and finally take the 930 bus from St Georges Tce Before William St Eastbound station to Spencer Rd After Langford Av station. The total trip duration for this route is approximately 1 hr 33 min. The ride fare is A$4.59.

93minA$4.59
Bus - 467467
Train - JOONDALUP LINEJOONDALUP LINE
Bus - 930930
Leaves from Joondalup Dr After Cheriton Dr

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Tapping
  • 2
    Bus - 467467
    Wait for bus
    467
    Joondalup Stn
  • 3
    Ride to bus station
    Ride to bus station
    Joondalup Stn
    ID 90
    15 min
  • 4
    Train - JOONDALUP LINEJOONDALUP LINE
    Wait for train
    JOONDALUP LINE
    Elizabeth Quay Train Stn
  • 5
    Ride to train station
    Ride to train station
    Elizabeth Quay Stn
    ID 135
    32 min
  • 6
    Walk to bus station
    Walk to bus station
    St Georges Tce Before William St Eastbound
    ID 115
    190 m • 3 min
  • 7
    Bus - 930930
    Wait for bus
    930
    Thornlie Stn
  • 8
    Ride to bus station Spencer Rd After Langford Av
    Ride to bus station
    Spencer Rd After Langford Av
    ID 20485
    34 min
*Duration based on 8am traffic

Alternative route from Tapping to Langford by bus and train via 390, JOONDALUP LINE and 930

To get from Tapping to Langford in Perth, you’ll need to take 2 bus lines and one train line: take the 390 bus from Clarkson Av After Harrington Av station to Joondalup Stn station. Next, you’ll have to switch to the JOONDALUP LINE train and finally take the 930 bus from St Georges Tce Before William St Eastbound station to Spencer Rd After Langford Av station. The total trip duration for this route is approximately 1 hr 46 min. The ride fare is A$4.59.

106minA$4.59
Walk to bus station
Bus - 390390
Train - JOONDALUP LINEJOONDALUP LINE
Bus - 930930
Leaves from Clarkson Av After Harrington Av

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Clarkson Av After Harrington Av
    ID 28024
    840 m • 11 min
  • 2
    Bus - 390390
    Wait for bus
    390
    Joondalup Stn
  • 3
    Ride to bus station
    Ride to bus station
    Joondalup Stn
    ID 90
    16 min
  • 4
    Train - JOONDALUP LINEJOONDALUP LINE
    Wait for train
    JOONDALUP LINE
    Elizabeth Quay Train Stn
  • 5
    Ride to train station
    Ride to train station
    Elizabeth Quay Stn
    ID 135
    32 min
  • 6
    Walk to bus station
    Walk to bus station
    St Georges Tce Before William St Eastbound
    ID 115
    190 m • 3 min
  • 7
    Bus - 930930
    Wait for bus
    930
    Thornlie Stn
  • 8
    Ride to bus station Spencer Rd After Langford Av
    Ride to bus station
    Spencer Rd After Langford Av
    ID 20485
    36 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Perth.
All local mobility options in one app

Public transport directions from Tapping to Langford

The distance between Tapping, Perth and Langford, Perth is approximately 46.99 km, which can typically be travelled in 93 min. Moovit will show you the directions from Tapping to Langford by bus and train, so no matter how you choose to travel in Perth – you will always have plenty of easy options.

Public transport stations close to Tapping

Tapping is located at Tapping, Perth and the nearest public transport station is Joondalup Dr After Rawlinna Pwy.

Train stations close to Tapping:

  • Currambine Stn

Bus stations close to Tapping:

  • Joondalup Dr After Rawlinna Pwy
  • Millendon St After Cheritin Dr
  • Millendon St Before Cheriton Dr

Public transport stations close to Langford, Perth

Langford is located at Langford, Perth and the nearest public transport station is Spencer Rd After Langford Av.

Bus stations close to Langford:

  • Spencer Rd After Langford Av
  • Langford Av After Spencer Rd
  • Langford Av After Cortis Wy

Related Routes

Alternative route from Tapping to Langford by bus and train via 390, JOONDALUP LINE and 930

To get from Tapping to Langford in Perth, you’ll need to take 2 bus lines and one train line: take the 390 bus from Clarkson Av After Harrington Av station to Joondalup Stn station. Next, you’ll have to switch to the JOONDALUP LINE train and finally take the 930 bus from St Georges Tce Before William St Eastbound station to Spencer Rd After Langford Av station. The total trip duration for this route is approximately 1 hr 46 min. The ride fare is A$4.59.

106minA$4.59
Walk to bus station
Bus - 390390
Train - JOONDALUP LINEJOONDALUP LINE
Bus - 930930
Leaves from Clarkson Av After Harrington Av

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Clarkson Av After Harrington Av
    ID 28024
    840 m • 11 min
  • 2
    Bus - 390390
    Wait for bus
    390
    Joondalup Stn
  • 3
    Ride to bus station
    Ride to bus station
    Joondalup Stn
    ID 90
    16 min
  • 4
    Train - JOONDALUP LINEJOONDALUP LINE
    Wait for train
    JOONDALUP LINE
    Elizabeth Quay Train Stn
  • 5
    Ride to train station
    Ride to train station
    Elizabeth Quay Stn
    ID 135
    32 min
  • 6
    Walk to bus station
    Walk to bus station
    St Georges Tce Before William St Eastbound
    ID 115
    190 m • 3 min
  • 7
    Bus - 930930
    Wait for bus
    930
    Thornlie Stn
  • 8
    Ride to bus station Spencer Rd After Langford Av
    Ride to bus station
    Spencer Rd After Langford Av
    ID 20485
    36 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Tapping to Langford?

    The fastest way takes 93 minutes, using Bus line 467, Bus line JOONDALUP LINE, Bus line 930.

  • What is the alternative route to get from Tapping to Langford?

    The alternative route takes 106 minutes, using Bus line 390, Bus line JOONDALUP LINE, Bus line 930.

  • Is there a direct bus between Tapping and Langford in Perth?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 1 hr 33 min.

  • Which bus line goes from Tapping to Langford in Perth?

    The 467 bus line goes from Joondalup Stn station near Tapping to Joondalup Stn station. From there you’ll have to take one bus line and one train line till Joondalup Stn station near Langford in Perth

  • How long does it take to travel from Tapping to Langford in Perth by bus and train?

    The total travel time between Tapping and Langford in Perth by bus and train is about 1 hr 33 min.

  • Where do I get on the bus near Tapping to get to Langford in Perth?

    Get on the 467 bus from the Joondalup Stn stop near Tapping in Perth.

  • Where do I get off the bus when travelling between Tapping and Langford in Perth?

    Get off the bus at the Joondalup Stn stop, which is closest to Langford in Perth.

  • How much is the total bus and train fare from Tapping to Langford?

    The ride from Tapping to Langford costs A$4.59.

Live arrivals, timetables, maps