How to get from Daylesford to Plenty by bus and train?
From Daylesford to Plenty by bus and train
To get from Daylesford to Plenty in Melbourne, you’ll need to take one bus line and 2 train lines: take the MILDURA - BALLARAT VIA BENDIGO & SWAN HILL bus from Cfa/Bridport St (Daylesford) station to Castlemaine Railway Station (Castlemaine) station. Next, you’ll have to switch to the SWAN HILL - MELBOURNE VIA BENDIGO train and finally take the HURSTBRIDGE train from Southern Cross station to Diamond Creek station. The total trip duration for this route is approximately 4 hr 50 min. The ride fare is A$13.84.
Step by Step
- 1Start from bus stationDaylesford
- 2Wait for busMILDURA - BALLARAT VIA BENDIGO & SWAN HILLMildura
- 3Ride to bus stationCastlemaine Railway Station (Castlemaine)ID 1623135 min
- 4Walk to train stationCastlemaine10 m • 1 min
- 5Wait for trainSWAN HILL - MELBOURNE VIA BENDIGOMelbourne
- 6Ride to train stationSouthern Cross103 min
- 7Wait for trainHURSTBRIDGEHurstbridge
- 8Ride to train stationDiamond Creek57 min
- 9Walk toPlenty3.44 km • 44 min
Public transport directions from Daylesford to Plenty
Public transport stations close to Plenty, Melbourne
Plenty is located at Plenty, Melbourne and the nearest public transport station is Howell Rd/Yan Yean Rd (Plenty).
Train stations close to Plenty:
- Diamond Creek
- Middle Gorge
- Greensborough
Bus stations close to Plenty:
- Howell Rd/Yan Yean Rd (Plenty)
- Sutherland Rd/Yan Yean Rd (Plenty)
- Yan Yean Rd (Plenty)
Related Routes
- Albert Park to Plenty
- Altona to Plenty
- Devon Meadows to Plenty
- Hawthorn to Plenty
- Sunbury to Plenty
- Thornbury to Plenty
- Toolern Vale to Plenty
- Arcadia South to Plenty
- Culgoa to Plenty
- Curlewis to Plenty
- Dadswells Bridge to Plenty
- Dalyston to Plenty
- Darley to Plenty
- Darnum to Plenty
- Dartmoor to Plenty
- Dereel to Plenty
- Evansford to Plenty
- Forrest to Plenty
- Gellibrand to Plenty
- Halls Gap to Plenty
Questions & Answers
What is the fastest way to get from Daylesford to Plenty?
The fastest way takes 290 minutes, using Bus line MILDURA - BALLARAT VIA BENDIGO & SWAN HILL, Bus line SWAN HILL - MELBOURNE VIA BENDIGO, Bus line HURSTBRIDGE.
Is there a direct bus between Daylesford and Plenty in Melbourne?
No, you’ll have to take one bus line and 2 train lines in total. The total travelling time is 4 hr 50 min.
Which bus line goes from Daylesford to Plenty in Melbourne?
The MILDURA - BALLARAT VIA BENDIGO & SWAN HILL bus line goes from Mildura station near Daylesford to Castlemaine Railway Station (Castlemaine) station. From there you’ll have to take 2 train lines till Castlemaine Railway Station (Castlemaine) station near Plenty in Melbourne
How long does it take to travel from Daylesford to Plenty in Melbourne by bus and train?
The total travel time between Daylesford and Plenty in Melbourne by bus and train is about 4 hr 50 min.
Where do I get on the bus near Daylesford to get to Plenty in Melbourne?
Get on the MILDURA - BALLARAT VIA BENDIGO & SWAN HILL bus from the Mildura stop near Daylesford in Melbourne.
Where do I get off the bus when travelling between Daylesford and Plenty in Melbourne?
Get off the bus at the Castlemaine Railway Station (Castlemaine) station, which is closest to Plenty in Melbourne.
How much is the bus fare from Daylesford to Plenty?
The ride from Daylesford to Plenty costs A$13.84.