How to get from Briar Hill to Portsea by bus?
From Briar Hill to Portsea by bus
To get from Briar Hill to Portsea in Melbourne, you’ll need to take 3 bus lines: take the 902 bus from Hughes St/Sherbourne Rd (Montmorency) station to Atkinson St/Williamsons Rd (Templestowe) station. Next, you’ll have to switch to the 901 bus and finally take the 788 bus from Frankston Railway Station/Young St (Frankston) station to Point Nepean National Park Entrance/Point Nepean Rd (Portsea) station. The total trip duration for this route is approximately 4 hr 2 min. The ride fare is A$15.82.
Step by Step
- 1Start from bus stationBriar Hill
- 2Wait for bus902Chelsea
- 3Ride to bus stationAtkinson St/Williamsons Rd (Templestowe)ID 482416 min
- 4Wait for bus901Frankston
- 5Ride to bus stationFrankston Railway Station/Young St (Frankston)ID 40396126 min
- 6Walk to bus stationFrankston Railway Station/Young St (Frankston)ID 21214200 m • 3 min
- 7Wait for bus788Portsea
- 8Ride to bus stationPoint Nepean National Park Entrance/Point Nepean Rd (Portsea)ID 1184489 min
From Briar Hill to Portsea by bus and train
To get from Briar Hill to Portsea in Melbourne, you’ll need to take 2 bus lines and one train line: take the 902 bus from Hughes St/Sherbourne Rd (Montmorency) station to Edithvale Railway Station/Edithvale Rd (Edithvale) station. Next, you’ll have to switch to the FRANKSTON train and finally take the 788 bus from Frankston Railway Station/Young St (Frankston) station to Point Nepean National Park Entrance/Point Nepean Rd (Portsea) station. The total trip duration for this route is approximately 4 hr 2 min. The ride fare is A$15.82.
Step by Step
- 1Start from bus stationBriar Hill
- 2Wait for bus902Chelsea
- 3Ride to bus stationEdithvale Railway Station/Edithvale Rd (Edithvale)ID 42763104 min
- 4Walk to train stationEdithvale130 m • 2 min
- 5Wait for trainFRANKSTONFrankston
- 6Ride to train stationFrankston17 min
- 7Walk to bus stationFrankston Railway Station/Young St (Frankston)ID 21214160 m • 3 min
- 8Wait for bus788Portsea
- 9Ride to bus stationPoint Nepean National Park Entrance/Point Nepean Rd (Portsea)ID 1184489 min
Public transport directions from Briar Hill to Portsea
Public transport stations close to Briar Hill
Briar Hill is located at Briar Hill, Melbourne and the nearest public transport station is Sherbourne Rd/Mountain View Rd (Briar Hill).
Train stations close to Briar Hill:
- Eltham
- Montmorency
- Watsonia
Bus stations close to Briar Hill:
- Sherbourne Rd/Mountain View Rd (Briar Hill)
- Beaconsfield Rd/Sherbourne Rd (Briar Hill)
- Community Hall/Mountain View Rd (Briar Hill)
Public transport stations close to Portsea, Melbourne
Portsea is located at Portsea, Melbourne and the nearest public transport station is Point Nepean National Park Entrance/Point Nepean Rd (Portsea).
Bus stations close to Portsea:
- Point Nepean National Park Entrance/Point Nepean Rd (Portsea)
- Delgany Ave/Point Nepean Rd (Portsea)
- Nepean Pl/Point Nepean Rd (Portsea)
Related Routes
- Broadmeadows to Portsea
- Carlton North to Portsea
- Clayton South to Portsea
- Derrimut to Portsea
- Eltham to Portsea
- Emerald to Portsea
- Glen Waverley to Portsea
- Highett to Portsea
- Lynbrook to Portsea
- Macleod to Portsea
- Melbourne Airport to Portsea
- Mount Martha to Portsea
- Narre Warren East to Portsea
- Noble Park to Portsea
- Officer to Portsea
- Port Melbourne to Portsea
- Red Hill South to Portsea
- Vermont to Portsea
- Bangholme to Portsea
- Dalyston to Portsea
From Briar Hill to Portsea by bus and train
To get from Briar Hill to Portsea in Melbourne, you’ll need to take 2 bus lines and one train line: take the 902 bus from Hughes St/Sherbourne Rd (Montmorency) station to Edithvale Railway Station/Edithvale Rd (Edithvale) station. Next, you’ll have to switch to the FRANKSTON train and finally take the 788 bus from Frankston Railway Station/Young St (Frankston) station to Point Nepean National Park Entrance/Point Nepean Rd (Portsea) station. The total trip duration for this route is approximately 4 hr 2 min. The ride fare is A$15.82.
Step by Step
- 1Start from bus stationBriar Hill
- 2Wait for bus902Chelsea
- 3Ride to bus stationEdithvale Railway Station/Edithvale Rd (Edithvale)ID 42763104 min
- 4Walk to train stationEdithvale130 m • 2 min
- 5Wait for trainFRANKSTONFrankston
- 6Ride to train stationFrankston17 min
- 7Walk to bus stationFrankston Railway Station/Young St (Frankston)ID 21214160 m • 3 min
- 8Wait for bus788Portsea
- 9Ride to bus stationPoint Nepean National Park Entrance/Point Nepean Rd (Portsea)ID 1184489 min
Questions & Answers
What is the fastest way to get from Briar Hill to Portsea?
The fastest way takes 242 minutes, using Bus line 902, Bus line 901, Bus line 788.
What is the alternative route to get from Briar Hill to Portsea?
The alternative route takes 242 minutes, using Bus line 902, Bus line FRANKSTON, Bus line 788.
Is there a direct bus between Briar Hill and Portsea in Melbourne?
No, you’ll have to take 3 bus lines in total. The total travelling time is 4 hr 2 min.
Which bus line goes from Briar Hill to Portsea in Melbourne?
The 902 bus line goes from Chelsea station near Briar Hill to Atkinson St/Williamsons Rd (Templestowe) station. From there you’ll have to take one bus line till Atkinson St/Williamsons Rd (Templestowe) station near Portsea in Melbourne
How long does it take to travel from Briar Hill to Portsea in Melbourne by bus?
The total travel time between Briar Hill and Portsea in Melbourne by bus is about 4 hr 2 min.
Where do I get on the bus near Briar Hill to get to Portsea in Melbourne?
Get on the 902 bus from the Chelsea stop near Briar Hill in Melbourne.
Where do I get off the bus when travelling between Briar Hill and Portsea in Melbourne?
Get off the bus at the Atkinson St/Williamsons Rd (Templestowe) stop, which is closest to Portsea in Melbourne.
How much is the bus fare from Briar Hill to Portsea?
The ride from Briar Hill to Portsea costs A$15.82.