How to get from Kingsbury to Portsea by bus, train and tram?
From Kingsbury to Portsea by bus, train and tram
To get from Kingsbury to Portsea in Melbourne, you’ll need to take one tram line, one train line and one bus line: take the 86 tram from 59-Preston Cemetery/Plenty Rd (Kingsbury) station to 6-Swanston St/Bourke St (Melbourne City) station. Next, you’ll have to switch to the FRANKSTON train and finally take the 788 bus from Frankston Railway Station/Young St (Frankston) station to Point Nepean National Park Entrance/Point Nepean Rd (Portsea) station. The total trip duration for this route is approximately 3 hr 42 min. The ride fare is A$16.00.
Step by Step
- 1Start from tram stationKingsbury
- 2Wait for tram86Waterfront City Docklands
- 3Ride to tram station6-Swanston St/Bourke St (Melbourne City)ID 1759347 min
- 4Walk to train stationFlinders Street600 m • 8 min
- 5Wait for trainFRANKSTONFrankston
- 6Ride to train stationFrankston64 min
- 7Walk to bus stationFrankston Railway Station/Young St (Frankston)ID 21214160 m • 3 min
- 8Wait for bus788Portsea
- 9Ride to bus stationPoint Nepean National Park Entrance/Point Nepean Rd (Portsea)ID 1184489 min
From Kingsbury to Portsea by bus
To get from Kingsbury to Portsea in Melbourne, you’ll need to take 3 bus lines: take the 382 bus from Preston Cemetery/Plenty Rd (Kingsbury) station to Danaher Dr/Mcdonalds Rd (South Morang) station. Next, you’ll have to switch to the 901 bus and finally take the 788 bus from Frankston Railway Station/Young St (Frankston) station to Point Nepean National Park Entrance/Point Nepean Rd (Portsea) station. The total trip duration for this route is approximately 4 hr 52 min. The ride fare is A$15.82.
Step by Step
- 1Walk to bus stationPreston Cemetery/Plenty Rd (Kingsbury)ID 1886120 m • 2 min
- 2Wait for bus382Whittlesea
- 3Ride to bus stationDanaher Dr/Mcdonalds Rd (South Morang)ID 208023 min
- 4Wait for bus901Frankston
- 5Ride to bus stationFrankston Railway Station/Young St (Frankston)ID 40396156 min
- 6Walk to bus stationFrankston Railway Station/Young St (Frankston)ID 21214200 m • 3 min
- 7Wait for bus788Portsea
- 8Ride to bus stationPoint Nepean National Park Entrance/Point Nepean Rd (Portsea)ID 1184489 min
Public transport directions from Kingsbury to Portsea
Public transport stations close to Kingsbury
Kingsbury is located at Kingsbury, Melbourne and the nearest public transport station is Plenty Rd/Dunne St (Kingsbury).
Bus stations close to Kingsbury:
- Plenty Rd/Dunne St (Kingsbury)
- Preston Cemetery/Plenty Rd (Kingsbury)
- Preston Cemetery/Plenty Rd (Bundoora)
Public transport stations close to Portsea, Melbourne
Portsea is located at Portsea, Melbourne and the nearest public transport station is Point Nepean National Park Entrance/Point Nepean Rd (Portsea).
Bus stations close to Portsea:
- Point Nepean National Park Entrance/Point Nepean Rd (Portsea)
- Delgany Ave/Point Nepean Rd (Portsea)
- Nepean Pl/Point Nepean Rd (Portsea)
Related Routes
- Broadmeadows to Portsea
- Carlton North to Portsea
- Clayton South to Portsea
- Derrimut to Portsea
- Eltham to Portsea
- Emerald to Portsea
- Glen Waverley to Portsea
- Highett to Portsea
- Lynbrook to Portsea
- Macleod to Portsea
- Melbourne Airport to Portsea
- Mount Martha to Portsea
- Narre Warren East to Portsea
- Noble Park to Portsea
- Officer to Portsea
- Port Melbourne to Portsea
- Red Hill South to Portsea
- Vermont to Portsea
- Bangholme to Portsea
- Dalyston to Portsea
From Kingsbury to Portsea by bus
To get from Kingsbury to Portsea in Melbourne, you’ll need to take 3 bus lines: take the 382 bus from Preston Cemetery/Plenty Rd (Kingsbury) station to Danaher Dr/Mcdonalds Rd (South Morang) station. Next, you’ll have to switch to the 901 bus and finally take the 788 bus from Frankston Railway Station/Young St (Frankston) station to Point Nepean National Park Entrance/Point Nepean Rd (Portsea) station. The total trip duration for this route is approximately 4 hr 52 min. The ride fare is A$15.82.
Step by Step
- 1Walk to bus stationPreston Cemetery/Plenty Rd (Kingsbury)ID 1886120 m • 2 min
- 2Wait for bus382Whittlesea
- 3Ride to bus stationDanaher Dr/Mcdonalds Rd (South Morang)ID 208023 min
- 4Wait for bus901Frankston
- 5Ride to bus stationFrankston Railway Station/Young St (Frankston)ID 40396156 min
- 6Walk to bus stationFrankston Railway Station/Young St (Frankston)ID 21214200 m • 3 min
- 7Wait for bus788Portsea
- 8Ride to bus stationPoint Nepean National Park Entrance/Point Nepean Rd (Portsea)ID 1184489 min
Questions & Answers
What is the fastest way to get from Kingsbury to Portsea?
The fastest way takes 222 minutes, using Bus line 86, Bus line FRANKSTON, Bus line 788.
What is the alternative route to get from Kingsbury to Portsea?
The alternative route takes 292 minutes, using Bus line 382, Bus line 901, Bus line 788.
Is there a direct tram between Kingsbury and Portsea in Melbourne?
No, you’ll have to take one tram line, one train line and one bus line in total. The total travelling time is 3 hr 42 min.
Which tram line goes from Kingsbury to Portsea in Melbourne?
The 86 tram line goes from Waterfront City Docklands station near Kingsbury to 6-Swanston St/Bourke St (Melbourne City) station. From there you’ll have to take one train line and one bus line till 6-Swanston St/Bourke St (Melbourne City) station near Portsea in Melbourne
How long does it take to travel from Kingsbury to Portsea in Melbourne by tram, train and bus?
The total travel time between Kingsbury and Portsea in Melbourne by tram, train and bus is about 3 hr 42 min.
Where do I get on the tram near Kingsbury to get to Portsea in Melbourne?
Get on the 86 tram from the Waterfront City Docklands station near Kingsbury in Melbourne.
Where do I get off the tram when travelling between Kingsbury and Portsea in Melbourne?
Get off the tram at the 6-Swanston St/Bourke St (Melbourne City) stop, which is closest to Portsea in Melbourne.
How much is the total tram, train and bus fare from Kingsbury to Portsea?
The ride from Kingsbury to Portsea costs A$16.00.