How to get from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56 by bus?
By bus
Take one direct bus from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56 in Carlton: take the 200 bus from Hardware St/Lonsdale St (Melbourne City) station to Queensberry St/Lygon St (Carlton) station. The total trip duration for this route is approximately 7 min. The ride fare is A$5.30.
Step by Step
- 1Start from bus stationHardware St/Lonsdale St (Melbourne City)
- 2Wait for bus200Bulleen
- 3Ride to bus stationQueensberry St/Lygon St (Carlton)ID 9596 min
Alternative route by bus via 207
Take one direct bus from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56 in Carlton: take the 207 bus from Hardware St/Lonsdale St (Melbourne City) station to Queensberry St/Lygon St (Carlton) station. The total trip duration for this route is approximately 8 min. The ride fare is A$5.30.
Step by Step
- 1Start from bus stationHardware St/Lonsdale St (Melbourne City)
- 2Wait for bus207Doncaster Sc
- 3Ride to bus stationQueensberry St/Lygon St (Carlton)ID 9597 min
Public transport directions from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56
Public transport stations close to Hardware St/Lonsdale St (Melbourne City)
Hardware St/Lonsdale St (Melbourne City) is located at Hardware St/Lonsdale St (Melbourne City), Carlton and the nearest public transport station is Lonsdale St/Queen St (Melbourne City).
Bus stations close to Hardware St/Lonsdale St (Melbourne City):
- Lonsdale St/Queen St (Melbourne City)
- Elizabeth St/Lonsdale St (Melbourne City)
- Queen St/Lonsdale St (Melbourne City)
Public transport stations close to RMIT Building 56, Carlton
RMIT Building 56 is located at Lygon Street, Carlton and the nearest public transport station is Queensberry St/Lygon St (Carlton).
Bus stations close to RMIT Building 56:
- Queensberry St/Lygon St (Carlton)
- Trades Hall/Lygon St (Carlton)
- Old Melbourne Gaol/Russell St (Melbourne City)
Related Routes
- Parliament to RMIT Building 56
- Melton to RMIT Building 56
- Hardware St/Lonsdale St (Melbourne City) to Boronia
- Hardware St/Lonsdale St (Melbourne City) to Flemington
- Hardware St/Lonsdale St (Melbourne City) to Mcmahons Creek
- Hardware St/Lonsdale St (Melbourne City) to Rosebud
- Hardware St/Lonsdale St (Melbourne City) to Southbank
- Hardware St/Lonsdale St (Melbourne City) to Springvale South
- Hardware St/Lonsdale St (Melbourne City) to Arcadia South
- Hardware St/Lonsdale St (Melbourne City) to Bacchus Marsh
- Hardware St/Lonsdale St (Melbourne City) to Barwon Downs
- Hardware St/Lonsdale St (Melbourne City) to Bealiba
- Hardware St/Lonsdale St (Melbourne City) to Cambrian Hill
- Hardware St/Lonsdale St (Melbourne City) to Colbinabbin
- Hardware St/Lonsdale St (Melbourne City) to Coonalpyn
- Hardware St/Lonsdale St (Melbourne City) to Dereel
- Hardware St/Lonsdale St (Melbourne City) to Evansford
- Hardware St/Lonsdale St (Melbourne City) to Forrest
- Hardware St/Lonsdale St (Melbourne City) to Gellibrand
- Hardware St/Lonsdale St (Melbourne City) to Killawarra
Alternative route by bus via 207
Take one direct bus from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56 in Carlton: take the 207 bus from Hardware St/Lonsdale St (Melbourne City) station to Queensberry St/Lygon St (Carlton) station. The total trip duration for this route is approximately 8 min. The ride fare is A$5.30.
Step by Step
- 1Start from bus stationHardware St/Lonsdale St (Melbourne City)
- 2Wait for bus207Doncaster Sc
- 3Ride to bus stationQueensberry St/Lygon St (Carlton)ID 9597 min
Questions & Answers
What is the fastest way to get from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56?
The fastest way takes 7 minutes, using Bus line 200.
What is the alternative route to get from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56?
The alternative route takes 8 minutes, using Bus line 207.
Is there a direct bus between Hardware St/Lonsdale St (Melbourne City) and RMIT Building 56?
Yes, there’s a direct bus going from Hardware St/Lonsdale St (Melbourne City) in Melbourne to RMIT Building 56 in Carlton in 7 min.
Which bus line goes from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56?
The 200 bus line goes from Bulleen station near Hardware St/Lonsdale St (Melbourne City) in Melbourne to Queensberry St/Lygon St (Carlton) station near RMIT Building 56 in Carlton.
How long does it take to travel from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56 by bus?
The total travel time between Hardware St/Lonsdale St (Melbourne City) in Melbourne and RMIT Building 56 in Carlton by bus is about 7 min.
Where do I get on the bus near Hardware St/Lonsdale St (Melbourne City) to get to RMIT Building 56?
Get on the 200 bus from the Bulleen stop near Hardware St/Lonsdale St (Melbourne City) in Melbourne.
Where do I get off the bus when travelling between Hardware St/Lonsdale St (Melbourne City) and RMIT Building 56?
Get off the bus at the Queensberry St/Lygon St (Carlton) stop, which is closest to RMIT Building 56 in Carlton.
When is the first bus from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56?
The first bus from Hardware St/Lonsdale St (Melbourne City) in Melbourne to RMIT Building 56 in Carlton is Bulleen - City (Queen St). It leaves the Hardware St/Lonsdale St (Melbourne City) stop at 00:03.
How much is the bus fare from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56?
The ride from Hardware St/Lonsdale St (Melbourne City) to RMIT Building 56 costs A$5.30.