Skip to main content

How to get from Fitzgerald St at Bent St to University of Western Sydney - Bankstown by bus and train?

From Fitzgerald St at Bent St to University of Western Sydney - Bankstown by bus and train

To get from Fitzgerald St at Bent St to University of Western Sydney - Bankstown in Milperra, you’ll need to take 2 bus lines and one train line: take the 373 bus from Bent St opp Fitzgerald St station to Through St at Wharf St station. Next, you’ll have to switch to the 32 train and finally take the M90 bus from Strathfield Station, Albert Rd, Stand E station to Bullecourt Ave after Horsley Rd station. The total trip duration for this route is approximately 12 hr 11 min.

731min
Bus - 373373
Train - 3232
Bus - M90M90
Walk to University of Western Sydney - Bankstown
Leaves from Bent St opp Fitzgerald St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Fitzgerald St at Bent St
  • 2
    Bus - 373373
    Wait for bus
    373
    Grafton
  • 3
    Ride to bus station
    Ride to bus station
    Through St at Wharf St
    ID 2460102
    11 min
  • 4
    Walk to train station
    Walk to train station
    Grafton Station
    ID 24601
    410 m • 6 min
  • 5
    Train - 3232
    Wait for train
    32
    Central
  • 6
    Ride to train station
    Ride to train station
    Strathfield Station
    ID 213510
    614 min
  • 7
    Walk to bus station
    Walk to bus station
    Strathfield Station, Albert Rd, Stand E
    ID 2135215
    10 m • 1 min
  • 8
    Bus - M90M90
    Wait for bus
    M90
    Liverpool Stn
  • 9
    Ride to bus station
    Ride to bus station
    Bullecourt Ave after Horsley Rd
    ID 221416
    48 min
  • 10
    Walk to University of Western Sydney - Bankstown
    Walk to
    University of Western Sydney - Bankstown
    Ian Smith Avenue
    580 m • 8 min
*Duration based on 8am traffic

Alternative route from Fitzgerald St at Bent St to University of Western Sydney - Bankstown by bus and train via 32 and M90

To get from Fitzgerald St at Bent St to University of Western Sydney - Bankstown in Milperra, take the 32 train from Grafton Station station to Strathfield Station station. Next, take the M90 bus from Strathfield Station, Albert Rd, Stand E station to Bullecourt Ave after Horsley Rd station. The total trip duration for this route is approximately 720 min.

720min
Walk to train station
Train - 3232
Bus - M90M90
Walk to University of Western Sydney - Bankstown
Leaves from Grafton Station

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Grafton Station
    ID 24601
    1.91 km • 25 min
  • 2
    Train - 3232
    Wait for train
    32
    Central
  • 3
    Ride to train station
    Ride to train station
    Strathfield Station
    ID 213510
    614 min
  • 4
    Walk to bus station
    Walk to bus station
    Strathfield Station, Albert Rd, Stand E
    ID 2135215
    10 m • 1 min
  • 5
    Bus - M90M90
    Wait for bus
    M90
    Liverpool Stn
  • 6
    Ride to bus station
    Ride to bus station
    Bullecourt Ave after Horsley Rd
    ID 221416
    48 min
  • 7
    Walk to University of Western Sydney - Bankstown
    Walk to
    University of Western Sydney - Bankstown
    Ian Smith Avenue
    580 m • 8 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Sydney.
All local mobility options in one app

Public transport directions from Fitzgerald St at Bent St to University of Western Sydney - Bankstown

The distance between Fitzgerald St at Bent St, Milperra and University of Western Sydney - Bankstown, Milperra is approximately 705.63 km, which can typically be travelled in 731 min. Moovit will show you the directions from Fitzgerald St at Bent St to University of Western Sydney - Bankstown by bus and train, so no matter how you choose to travel in Milperra – you will always have plenty of easy options.

Public transport stations close to Fitzgerald St at Bent St

Fitzgerald St at Bent St is located at Fitzgerald St at Bent St, Milperra and the nearest public transport station is Bent St opp Fitzgerald St.

Train stations close to Fitzgerald St at Bent St:

  • Grafton Station

Bus stations close to Fitzgerald St at Bent St:

  • Bent St opp Fitzgerald St
  • Tyson St before Bent St
  • Bent St before McGuren St

Public transport stations close to University of Western Sydney - Bankstown, Milperra

University of Western Sydney - Bankstown is located at Ian Smith Avenue, Milperra and the nearest public transport station is Horsley Rd opp Beaconsfield St.

Train stations close to University of Western Sydney - Bankstown:

  • Revesby Station
  • Panania Station
  • Padstow Station

Bus stations close to University of Western Sydney - Bankstown:

  • Horsley Rd opp Beaconsfield St
  • Horsley Rd after Beaconsfield St
  • Beaconsfield St at Horsley Rd

Alternative route from Fitzgerald St at Bent St to University of Western Sydney - Bankstown by bus and train via 32 and M90

To get from Fitzgerald St at Bent St to University of Western Sydney - Bankstown in Milperra, take the 32 train from Grafton Station station to Strathfield Station station. Next, take the M90 bus from Strathfield Station, Albert Rd, Stand E station to Bullecourt Ave after Horsley Rd station. The total trip duration for this route is approximately 720 min.

720min
Walk to train station
Train - 3232
Bus - M90M90
Walk to University of Western Sydney - Bankstown
Leaves from Grafton Station

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Grafton Station
    ID 24601
    1.91 km • 25 min
  • 2
    Train - 3232
    Wait for train
    32
    Central
  • 3
    Ride to train station
    Ride to train station
    Strathfield Station
    ID 213510
    614 min
  • 4
    Walk to bus station
    Walk to bus station
    Strathfield Station, Albert Rd, Stand E
    ID 2135215
    10 m • 1 min
  • 5
    Bus - M90M90
    Wait for bus
    M90
    Liverpool Stn
  • 6
    Ride to bus station
    Ride to bus station
    Bullecourt Ave after Horsley Rd
    ID 221416
    48 min
  • 7
    Walk to University of Western Sydney - Bankstown
    Walk to
    University of Western Sydney - Bankstown
    Ian Smith Avenue
    580 m • 8 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Fitzgerald St at Bent St to University of Western Sydney - Bankstown?

    The fastest way takes 731 minutes, using Bus line 373, Bus line 32, Bus line M90.

  • What is the alternative route to get from Fitzgerald St at Bent St to University of Western Sydney - Bankstown?

    The alternative route takes 720 minutes, using Bus line 32, Bus line M90.

  • Is there a direct bus between Fitzgerald St at Bent St and University of Western Sydney - Bankstown?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 12 hr 11 min.

  • Which bus line goes from Fitzgerald St at Bent St to University of Western Sydney - Bankstown?

    The 373 bus line goes from Grafton station near Fitzgerald St at Bent St in South Grafton to Through St at Wharf St station. From there you’ll have to take one bus line and one train line till Through St at Wharf St station near University of Western Sydney - Bankstown in Milperra.

  • How long does it take to travel from Fitzgerald St at Bent St to University of Western Sydney - Bankstown by bus and train?

    The total travel time between Fitzgerald St at Bent St in South Grafton and University of Western Sydney - Bankstown in Milperra by bus and train is about 12 hr 11 min.

  • Where do I get on the bus near Fitzgerald St at Bent St to get to University of Western Sydney - Bankstown?

    Get on the 373 bus from the Grafton stop near Fitzgerald St at Bent St in South Grafton.

  • Where do I get off the bus when travelling between Fitzgerald St at Bent St and University of Western Sydney - Bankstown?

    Get off the bus at the Through St at Wharf St stop, which is closest to University of Western Sydney - Bankstown in Milperra.

Live arrivals, timetables, maps