How to get from The Patch to Windsor by bus, train and tram?

By bus, train and tram

To get from The Patch to Windsor in Melbourne, you’ll need to take one bus line, one train line and one tram line: take the 663 bus from O'Connors Rd/The Patch Rd (The Patch) station to Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station. Next, you’ll have to switch to the BELGRAVE train and finally take the 5 tram from 13-Federation Square/Swanston St (Melbourne City) station to 31-Queens Way/Queens Way (Windsor) station. The total trip duration for this route is approximately 2 hr 9 min. The ride fare is A$5.30.

129minA$5.30
Bus - 663
663
Train - BELGRAVE
BELGRAVE
Tram - 5
5
Leaves from O'Connors Rd/The Patch Rd (The Patch)

Step by Step

  • 1
    Start from bus station
    Start from bus station
    The Patch
  • 2
    Bus - 663663
    Wait for bus
    663
    Belgrave
  • 3
    Ride to bus station
    Ride to bus station
    Belgrave Station/Belgrave-Gembrook Rd (Belgrave)
    ID 19581
    11 min
  • 4
    Walk to train station
    Walk to train station
    Belgrave
    20 m • 1 min
  • 5
    Train - BELGRAVEBELGRAVE
    Wait for train
    BELGRAVE
    City (Flinders Street)
  • 6
    Ride to train station
    Ride to train station
    Flinders Street
    64 min
  • 7
    Walk to tram station
    Walk to tram station
    13-Federation Square/Swanston St (Melbourne City)
    ID 19499
    60 m • 1 min
  • 8
    Tram - 55
    Wait for tram
    5
    Malvern (Burke Road)
  • 9
    Ride to tram station 31-Queens Way/Queens Way (Windsor)
    Ride to tram station
    31-Queens Way/Queens Way (Windsor)
    ID 19035
    15 min
*Duration based on 8am traffic

By bus and train

To get from The Patch to Windsor in Melbourne, you’ll need to take one bus line and 2 train lines: take the 663 bus from O'Connors Rd/The Patch Rd (The Patch) station to Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station. Next, you’ll have to switch to the BELGRAVE train and finally take the SANDRINGHAM train from Richmond station to Windsor station. The total trip duration for this route is approximately 2 hr 5 min. The ride fare is A$5.30.

125minA$5.30
Bus - 663
663
Train - BELGRAVE
BELGRAVE
Train - SANDRINGHAM
SANDRINGHAM
Walk to Windsor
Leaves from O'Connors Rd/The Patch Rd (The Patch)

Step by Step

  • 1
    Start from bus station
    Start from bus station
    The Patch
  • 2
    Bus - 663663
    Wait for bus
    663
    Belgrave
  • 3
    Ride to bus station
    Ride to bus station
    Belgrave Station/Belgrave-Gembrook Rd (Belgrave)
    ID 19581
    11 min
  • 4
    Walk to train station
    Walk to train station
    Belgrave
    20 m • 1 min
  • 5
    Train - BELGRAVEBELGRAVE
    Wait for train
    BELGRAVE
    City (Flinders Street)
  • 6
    Ride to train station
    Ride to train station
    Richmond
    60 min
  • 7
    Train - SANDRINGHAMSANDRINGHAM
    Wait for train
    SANDRINGHAM
    Sandringham
  • 8
    Ride to train station
    Ride to train station
    Windsor
    7 min
  • 9
    Walk to Windsor
    Walk to
    Windsor
    480 m • 7 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from The Patch to Windsor

The distance between The Patch, Melbourne and Windsor, Melbourne is approximately 52.73 km, which can typically be travelled in 129 min. Moovit will show you the directions from The Patch to Windsor by bus, train and tram, so no matter how you choose to travel in Melbourne – you will always have plenty of easy options.

Public transport stations close to The Patch

The Patch is located at The Patch, Melbourne and the nearest public transport station is O'Connors Rd/The Patch Rd (The Patch).

Bus stations close to The Patch:

  • O'Connors Rd/The Patch Rd (The Patch)
  • Lawrence Ct/The Patch Rd (The Patch)
  • Camms Rd/The Patch Rd (The Patch)

Public transport stations close to Windsor, Melbourne

Windsor is located at Windsor, Melbourne and the nearest public transport station is St Kilda Junction/Punt Rd (Windsor).

Train stations close to Windsor:

  • Windsor

Bus stations close to Windsor:

  • St Kilda Junction/Punt Rd (Windsor)
  • St Kilda Junction/Barkly St (St Kilda)
  • Union St/Punt Rd (Windsor)

Related Routes

By bus and train

To get from The Patch to Windsor in Melbourne, you’ll need to take one bus line and 2 train lines: take the 663 bus from O'Connors Rd/The Patch Rd (The Patch) station to Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station. Next, you’ll have to switch to the BELGRAVE train and finally take the SANDRINGHAM train from Richmond station to Windsor station. The total trip duration for this route is approximately 2 hr 5 min. The ride fare is A$5.30.

125minA$5.30
Bus - 663
663
Train - BELGRAVE
BELGRAVE
Train - SANDRINGHAM
SANDRINGHAM
Walk to Windsor
Leaves from O'Connors Rd/The Patch Rd (The Patch)

Step by Step

  • 1
    Start from bus station
    Start from bus station
    The Patch
  • 2
    Bus - 663663
    Wait for bus
    663
    Belgrave
  • 3
    Ride to bus station
    Ride to bus station
    Belgrave Station/Belgrave-Gembrook Rd (Belgrave)
    ID 19581
    11 min
  • 4
    Walk to train station
    Walk to train station
    Belgrave
    20 m • 1 min
  • 5
    Train - BELGRAVEBELGRAVE
    Wait for train
    BELGRAVE
    City (Flinders Street)
  • 6
    Ride to train station
    Ride to train station
    Richmond
    60 min
  • 7
    Train - SANDRINGHAMSANDRINGHAM
    Wait for train
    SANDRINGHAM
    Sandringham
  • 8
    Ride to train station
    Ride to train station
    Windsor
    7 min
  • 9
    Walk to Windsor
    Walk to
    Windsor
    480 m • 7 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from The Patch to Windsor?

    The fastest way takes 129 minutes, using Bus line 663, Bus line BELGRAVE, Bus line 5.

  • What is the alternative route to get from The Patch to Windsor?

    The alternative route takes 125 minutes, using Bus line 663, Bus line BELGRAVE, Bus line SANDRINGHAM.

  • Is there a direct bus between The Patch and Windsor in Melbourne?

    No, you’ll have to take one bus line, one train line and one tram line in total. The total travelling time is 2 hr 9 min.

  • Which bus line goes from The Patch to Windsor in Melbourne?

    The 663 bus line goes from Belgrave station near The Patch to Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station. From there you’ll have to take one train line and one tram line till Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station near Windsor in Melbourne

  • How long does it take to travel from The Patch to Windsor in Melbourne by bus, train and tram?

    The total travel time between The Patch and Windsor in Melbourne by bus, train and tram is about 2 hr 9 min.

  • Where do I get on the bus near The Patch to get to Windsor in Melbourne?

    Get on the 663 bus from the Belgrave stop near The Patch in Melbourne.

  • Where do I get off the bus when travelling between The Patch and Windsor in Melbourne?

    Get off the bus at the Belgrave Station/Belgrave-Gembrook Rd (Belgrave) station, which is closest to Windsor in Melbourne.

  • How much is the total bus, train and tram fare from The Patch to Windsor?

    The ride from The Patch to Windsor costs A$5.30.

Live arrivals, timetables, maps