How to get from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program by bus and train?

From LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program by bus and train

To get from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program in Palmdale, you’ll need to take 2 bus lines and one train line: take the 4X bus from Figueroa / 23rd station to Alameda St at Los Angeles St station. Next, you’ll have to switch to the ANTELOPE VALLEY LINE train and finally take the 3 bus from Palmdale Transportation Center station to Rancho Vista Blvd. & Sierra Hwy. station. The total trip duration for this route is approximately 3 hr 36 min. The ride fare is $12.75.

216min$12.75
Walk to bus station
Bus - 4X4X
Train - ANTELOPE VALLEY LINE
ANTELOPE VALLEY LINE
Bus - 33
Walk to Aircraft Fabrication and Assembly Rapid Training Program
Leaves from Figueroa / 23rd

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Figueroa / 23rd
    190 yd • 3 min
  • 2
    Bus - 4X4X
    Wait for bus
    4X
    Downtown L.A. Union Station
  • 3
    Ride to bus station
    Ride to bus station
    Alameda St at Los Angeles St
    ID 762173
    18 min
  • 4
    Walk to train station
    Walk to train station
    Union Station
    ID 80214S
    210 yd • 3 min
  • 5
    Train - ANTELOPE VALLEY LINE
    Wait for train
    ANTELOPE VALLEY LINE
    #203| Lancaster
  • 6
    Ride to train station
    Ride to train station
    Palmdale Metrolink Station
    122 min
  • 7
    Walk to bus station
    Walk to bus station
    Palmdale Transportation Center
    ID 1008
    140 yd • 2 min
  • 8
    Bus - 33
    Wait for bus
    3
    Av Mall
  • 9
    Ride to bus station
    Ride to bus station
    Rancho Vista Blvd. & Sierra Hwy.
    ID 100
    3 min
  • 10
    Walk to Aircraft Fabrication and Assembly Rapid Training Program
    Walk to
    Aircraft Fabrication and Assembly Rapid Training Program
    2.44 mi • 50 min
*Duration based on 8am traffic

Alternative route from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program by bus and train via 603, ANTELOPE VALLEY LINE and 3

To get from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program in Palmdale, you’ll need to take 2 bus lines and one train line: take the 603 bus from 23rd / Flower station to San Fernando / Central station. Next, you’ll have to switch to the ANTELOPE VALLEY LINE train and finally take the 3 bus from Palmdale Transportation Center station to Rancho Vista Blvd. & Sierra Hwy. station. The total trip duration for this route is approximately 3 hr 57 min. The ride fare is $11.75.

237min$11.75
Walk to bus station
Bus - 603603
Train - ANTELOPE VALLEY LINE
ANTELOPE VALLEY LINE
Bus - 33
Walk to Aircraft Fabrication and Assembly Rapid Training Program
Leaves from 23rd / Flower

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    23rd / Flower
    ID 17104
    20 yd • 1 min
  • 2
    Bus - 603603
    Wait for bus
    603
    Glendale Galleria
  • 3
    Ride to bus station
    Ride to bus station
    San Fernando / Central
    ID 2469
    49 min
  • 4
    Walk to train station
    Walk to train station
    Glendale Metrolink
    490 yd • 6 min
  • 5
    Train - ANTELOPE VALLEY LINE
    Wait for train
    ANTELOPE VALLEY LINE
    #203| Lancaster
  • 6
    Ride to train station
    Ride to train station
    Palmdale Metrolink Station
    110 min
  • 7
    Walk to bus station
    Walk to bus station
    Palmdale Transportation Center
    ID 1008
    140 yd • 2 min
  • 8
    Bus - 33
    Wait for bus
    3
    Av Mall
  • 9
    Ride to bus station
    Ride to bus station
    Rancho Vista Blvd. & Sierra Hwy.
    ID 100
    3 min
  • 10
    Walk to Aircraft Fabrication and Assembly Rapid Training Program
    Walk to
    Aircraft Fabrication and Assembly Rapid Training Program
    2.44 mi • 50 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Los Angeles.
All local mobility options in one app

Public transit directions from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program

The distance between LATTC / Ortho Institute, Palmdale and Aircraft Fabrication and Assembly Rapid Training Program, Palmdale is approximately 76.47 mi, which can typically be travelled in 216 min. Moovit will show you the directions from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program by bus and train, so no matter how you choose to travel in Palmdale – you will always have plenty of easy options.

Public transit stations close to LATTC / Ortho Institute

LATTC / Ortho Institute is located at LATTC / Ortho Institute, Palmdale and the nearest public transit station is Flower / 23rd.

Bus stations close to LATTC / Ortho Institute:

  • Flower / 23rd
  • Flower St at 23rd St
  • 23rd & Figueroa St.

Public transit stations close to Aircraft Fabrication and Assembly Rapid Training Program, Palmdale

Aircraft Fabrication and Assembly Rapid Training Program is located at Aircraft Fabrication and Assembly Rapid Training Program, Palmdale and the nearest public transit station is Palmdale Metrolink Station.

Train stations close to Aircraft Fabrication and Assembly Rapid Training Program:

  • Palmdale Metrolink Station

Related Routes

Alternative route from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program by bus and train via 603, ANTELOPE VALLEY LINE and 3

To get from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program in Palmdale, you’ll need to take 2 bus lines and one train line: take the 603 bus from 23rd / Flower station to San Fernando / Central station. Next, you’ll have to switch to the ANTELOPE VALLEY LINE train and finally take the 3 bus from Palmdale Transportation Center station to Rancho Vista Blvd. & Sierra Hwy. station. The total trip duration for this route is approximately 3 hr 57 min. The ride fare is $11.75.

237min$11.75
Walk to bus station
Bus - 603603
Train - ANTELOPE VALLEY LINE
ANTELOPE VALLEY LINE
Bus - 33
Walk to Aircraft Fabrication and Assembly Rapid Training Program
Leaves from 23rd / Flower

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    23rd / Flower
    ID 17104
    20 yd • 1 min
  • 2
    Bus - 603603
    Wait for bus
    603
    Glendale Galleria
  • 3
    Ride to bus station
    Ride to bus station
    San Fernando / Central
    ID 2469
    49 min
  • 4
    Walk to train station
    Walk to train station
    Glendale Metrolink
    490 yd • 6 min
  • 5
    Train - ANTELOPE VALLEY LINE
    Wait for train
    ANTELOPE VALLEY LINE
    #203| Lancaster
  • 6
    Ride to train station
    Ride to train station
    Palmdale Metrolink Station
    110 min
  • 7
    Walk to bus station
    Walk to bus station
    Palmdale Transportation Center
    ID 1008
    140 yd • 2 min
  • 8
    Bus - 33
    Wait for bus
    3
    Av Mall
  • 9
    Ride to bus station
    Ride to bus station
    Rancho Vista Blvd. & Sierra Hwy.
    ID 100
    3 min
  • 10
    Walk to Aircraft Fabrication and Assembly Rapid Training Program
    Walk to
    Aircraft Fabrication and Assembly Rapid Training Program
    2.44 mi • 50 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program?

    The fastest way takes 216 minutes, using Bus line 4X, Bus line ANTELOPE VALLEY LINE, Bus line 3.

  • What is the alternative route to get from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program?

    The alternative route takes 237 minutes, using Bus line 603, Bus line ANTELOPE VALLEY LINE, Bus line 3.

  • Is there a direct bus between LATTC / Ortho Institute and Aircraft Fabrication and Assembly Rapid Training Program?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 3 hr 36 min.

  • Which bus line goes from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program?

    The 4X bus line goes from Figueroa / 23rd station near LATTC / Ortho Institute in Historic South-Central, La to Downtown L.A. Union Station station. From there you’ll have to take one bus line and one train line till Downtown L.A. Union Station station near Aircraft Fabrication and Assembly Rapid Training Program in Palmdale.

  • How long does it take to travel from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program by bus and train?

    The total travel time between LATTC / Ortho Institute in Historic South-Central, La and Aircraft Fabrication and Assembly Rapid Training Program in Palmdale by bus and train is about 3 hr 36 min.

  • Where do I get on the bus near LATTC / Ortho Institute to get to Aircraft Fabrication and Assembly Rapid Training Program?

    Get on the 4X bus from the Figueroa / 23rd stop near LATTC / Ortho Institute in Historic South-Central, La.

  • Where do I get off the bus when travelling between LATTC / Ortho Institute and Aircraft Fabrication and Assembly Rapid Training Program?

    Get off the bus at the Downtown L.A. Union Station stop, which is closest to Aircraft Fabrication and Assembly Rapid Training Program in Palmdale.

  • How much is the total bus and train fare from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program?

    The ride from LATTC / Ortho Institute to Aircraft Fabrication and Assembly Rapid Training Program costs $12.75.

Real-Time Arrivals, Schedules, Maps & More