How to get from Culpeper to Annandale by bus and train?
By bus and train
To get from Culpeper to Annandale in Washington, D.C. - Baltimore, MD, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Alexandria station. Next, you’ll have to switch to the 29K bus and finally take the 803 bus from Rt 236 Little River Tpke & Woodland station to Patriot And Americana station. The total trip duration for this route is approximately 2 hr 12 min.
Step by Step
- 1Start from train stationCulpeper
- 2Wait for trainNORTHEAST REGIONALNew York
- 3Ride to train stationAlexandria73 min
- 4Walk to bus stationKing St Station+Bus Bay BID 4001119340 yd • 5 min
- 5Wait for bus29KWest To George Mason University
- 6Ride to bus stationRt 236 Little River Tpke & Woodland32 min
- 7Wait for bus803803 Annandale
- 8Ride to bus stationPatriot And AmericanaID 51915 min
Alternative route by bus and train via NORTHEAST REGIONAL and 29K
To get from Culpeper to Annandale in Washington, D.C. - Baltimore, MD, take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Alexandria station. Next, take the 29K bus from King St Station+Bus Bay B station to Rt 236 Little River Tpke & Hummer R station. The total trip duration for this route is approximately 2 hr 19 min.
Step by Step
- 1Start from train stationCulpeper
- 2Wait for trainNORTHEAST REGIONALNew York
- 3Ride to train stationAlexandria73 min
- 4Walk to bus stationKing St Station+Bus Bay BID 4001119340 yd • 5 min
- 5Wait for bus29KWest To George Mason University
- 6Ride to bus stationRt 236 Little River Tpke & Hummer R33 min
- 7Walk toAnnandale0.88 mi • 18 min
Public transit directions from Culpeper to Annandale
Public transit stations close to Culpeper
Culpeper is located at Culpeper, Washington, D.C. - Baltimore, MD and the nearest public transit station is Culpeper Station.
Train stations close to Culpeper:
- Culpeper Amtrak
Bus stations close to Culpeper:
- Culpeper Station
- Depot
- Commerce St
Public transit stations close to Annandale, Washington, D.C. - Baltimore, MD
Annandale is located at Annandale, Washington, D.C. - Baltimore, MD and the nearest public transit station is Patriot Dr+Americana Dr.
Train stations close to Annandale:
- Backlick Road Station
- Rolling Road Station
Bus stations close to Annandale:
- Patriot Dr+Americana Dr
- Patriot And Americana
- Patriot Dr+#7923
Related Routes
- Salisbury to Annandale
- Lusby to Annandale
- West Ocean City to Annandale
- Cambridge to Annandale
- Charlestown to Annandale
- Gainesville to Annandale
- La Vale to Annandale
- Clarysville to Annandale
- Cresaptown to Annandale
- Bowling Green to Annandale
- Frostburg to Annandale
- Danville to Annandale
- Eckhart Mines to Annandale
- Orange to Annandale
- Spotsylvania Courthouse to Annandale
- Norfolk to Annandale
- Stafford County to Annandale
- Colonial Heights to Annandale
- Garrett County to Annandale
- Prince George's County to Annandale
Alternative route by bus and train via NORTHEAST REGIONAL and 29K
To get from Culpeper to Annandale in Washington, D.C. - Baltimore, MD, take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Alexandria station. Next, take the 29K bus from King St Station+Bus Bay B station to Rt 236 Little River Tpke & Hummer R station. The total trip duration for this route is approximately 2 hr 19 min.
Step by Step
- 1Start from train stationCulpeper
- 2Wait for trainNORTHEAST REGIONALNew York
- 3Ride to train stationAlexandria73 min
- 4Walk to bus stationKing St Station+Bus Bay BID 4001119340 yd • 5 min
- 5Wait for bus29KWest To George Mason University
- 6Ride to bus stationRt 236 Little River Tpke & Hummer R33 min
- 7Walk toAnnandale0.88 mi • 18 min
Questions & Answers
What is the fastest way to get from Culpeper to Annandale?
The fastest way takes 132 minutes, using Bus line NORTHEAST REGIONAL, Bus line 29K, Bus line 803.
What is the alternative route to get from Culpeper to Annandale?
The alternative route takes 139 minutes, using Bus line NORTHEAST REGIONAL, Bus line 29K.
Is there a direct train between Culpeper and Annandale in Washington, D.C. - Baltimore, MD?
No, you’ll have to take one train line and 2 bus lines in total. The total travelling time is 2 hr 12 min.
Which train line goes from Culpeper to Annandale in Washington, D.C. - Baltimore, MD?
The NORTHEAST REGIONAL train line goes from New York station near Culpeper to Alexandria station. From there you’ll have to take 2 bus lines till Alexandria station near Annandale in Washington, D.C. - Baltimore, MD
How long does it take to travel from Culpeper to Annandale in Washington, D.C. - Baltimore, MD by train and bus?
The total travel time between Culpeper and Annandale in Washington, D.C. - Baltimore, MD by train and bus is about 2 hr 12 min.
Where do I get on the train near Culpeper to get to Annandale in Washington, D.C. - Baltimore, MD?
Get on the NORTHEAST REGIONAL train from the New York station near Culpeper in Washington, D.C. - Baltimore, MD.
Where do I get off the train when travelling between Culpeper and Annandale in Washington, D.C. - Baltimore, MD?
Get off the train at the Alexandria stop, which is closest to Annandale in Washington, D.C. - Baltimore, MD.