How to get from Elkton to Beltsville by bus and train?
From Elkton to Beltsville by bus and train
To get from Elkton to Beltsville in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 4 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the G12 bus from New Carrollton+Bus Bay J station to Greenbelt+Bus Bay E station. The total trip duration for this route is approximately 4 hr 13 min.
Step by Step
- 1Start from bus stationElkton
- 2Wait for busROUTE 4Loop
- 3Ride to bus stationNewark Train Station51 min
- 4Wait for trainNORTHEAST REGIONALWashington
- 5Ride to train stationNew Carrollton, Md78 min
- 6Walk to bus stationNew Carrollton+Bus Bay JID 300330920 yd • 1 min
- 7Wait for busG12West To Greenbelt Station
- 8Ride to bus stationGreenbelt+Bus Bay EID 300335443 min
- 9Walk toBeltsville2.38 mi • 49 min
Alternative route from Elkton to Beltsville by bus and train via ROUTE 5, NORTHEAST REGIONAL and G12
To get from Elkton to Beltsville in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 5 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the G12 bus from New Carrollton+Bus Bay J station to Greenbelt+Bus Bay E station. The total trip duration for this route is approximately 4 hr 38 min.
Step by Step
- 1Start from bus stationElkton
- 2Wait for busROUTE 5Newark Train Station
- 3Ride to bus stationNewark Train Station15 min
- 4Wait for trainNORTHEAST REGIONALWashington
- 5Ride to train stationNew Carrollton, Md78 min
- 6Walk to bus stationNew Carrollton+Bus Bay JID 300330920 yd • 1 min
- 7Wait for busG12West To Greenbelt Station
- 8Ride to bus stationGreenbelt+Bus Bay EID 300335443 min
- 9Walk toBeltsville2.38 mi • 49 min
Public transit directions from Elkton to Beltsville
Public transit stations close to Elkton
Elkton is located at Elkton, Washington, D.C. - Baltimore, MD and the nearest public transit station is Chesapeake Blvd. After Mva.
Bus stations close to Elkton:
- Chesapeake Blvd. After Mva
- Rt 40 - Chili's
- Super Wal-Mart
Public transit stations close to Beltsville, Washington, D.C. - Baltimore, MD
Beltsville is located at Beltsville, Washington, D.C. - Baltimore, MD and the nearest public transit station is Jayrose Bl+Cherry Hill Rd.
Metro stations close to Beltsville:
- Greenbelt
Train stations close to Beltsville:
- Greenbelt
Bus stations close to Beltsville:
- Jayrose Bl+Cherry Hill Rd
- Seven Springs Vil+#9300
- Seven Springs Village & #9308
Related Routes
- Solomons to Beltsville
- Lexington Park to Beltsville
- West Ocean City to Beltsville
- Charlestown to Beltsville
- Gainesville to Beltsville
- Danville to Beltsville
- Orange to Beltsville
- Spotsylvania Courthouse to Beltsville
- Norfolk to Beltsville
- Stafford County to Beltsville
- Colonial Heights to Beltsville
- Garrett County to Beltsville
- Isle Of Wight County to Beltsville
- Prince George's County to Beltsville
- Somerset County to Beltsville
- Rockingham County to Beltsville
- Culpeper County to Beltsville
- Cecil County to Beltsville
- Harrisonburg to Beltsville
- Lynchburg to Beltsville
Alternative route from Elkton to Beltsville by bus and train via ROUTE 5, NORTHEAST REGIONAL and G12
To get from Elkton to Beltsville in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 5 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the G12 bus from New Carrollton+Bus Bay J station to Greenbelt+Bus Bay E station. The total trip duration for this route is approximately 4 hr 38 min.
Step by Step
- 1Start from bus stationElkton
- 2Wait for busROUTE 5Newark Train Station
- 3Ride to bus stationNewark Train Station15 min
- 4Wait for trainNORTHEAST REGIONALWashington
- 5Ride to train stationNew Carrollton, Md78 min
- 6Walk to bus stationNew Carrollton+Bus Bay JID 300330920 yd • 1 min
- 7Wait for busG12West To Greenbelt Station
- 8Ride to bus stationGreenbelt+Bus Bay EID 300335443 min
- 9Walk toBeltsville2.38 mi • 49 min
Questions & Answers
What is the fastest way to get from Elkton to Beltsville?
The fastest way takes 253 minutes, using Bus line ROUTE 4, Bus line NORTHEAST REGIONAL, Bus line G12.
What is the alternative route to get from Elkton to Beltsville?
The alternative route takes 278 minutes, using Bus line ROUTE 5, Bus line NORTHEAST REGIONAL, Bus line G12.
Is there a direct bus between Elkton and Beltsville in Washington, D.C. - Baltimore, MD?
No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 4 hr 13 min.
Which bus line goes from Elkton to Beltsville in Washington, D.C. - Baltimore, MD?
The ROUTE 4 bus line goes from Loop station near Elkton to Newark Amtrak station. From there you’ll have to take one bus line and one train line till Newark Amtrak station near Beltsville in Washington, D.C. - Baltimore, MD
How long does it take to travel from Elkton to Beltsville in Washington, D.C. - Baltimore, MD by bus and train?
The total travel time between Elkton and Beltsville in Washington, D.C. - Baltimore, MD by bus and train is about 4 hr 13 min.
Where do I get on the bus near Elkton to get to Beltsville in Washington, D.C. - Baltimore, MD?
Get on the ROUTE 4 bus from the Loop stop near Elkton in Washington, D.C. - Baltimore, MD.
Where do I get off the bus when travelling between Elkton and Beltsville in Washington, D.C. - Baltimore, MD?
Get off the bus at the Newark Amtrak stop, which is closest to Beltsville in Washington, D.C. - Baltimore, MD.