How to get from Hyattsville Crossing Metro Station to Beltsville by bus?

By bus

To get from Hyattsville Crossing Metro Station to Beltsville in Washington, D.C. - Baltimore, MD, you’ll need to take 3 bus lines: take the C4 bus from Pg Plaza Station station to Takoma Langley Crossroads Transit Center + Bus Bay A station. Next, you’ll have to switch to the K6 bus and finally take the 27 bus from Powder Mill Rd & New Hampshire Ave station to Powder Mill Rd + Boxer Rd station. The total trip duration for this route is approximately 1 hr 38 min. The ride fare is $5.00.

98min$5.00
Walk to bus station
Bus - C4C4
Bus - K6K6
Bus - 2727
Walk to Beltsville
Leaves from Pg Plaza Station

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Pg Plaza Station
    20 yd • 1 min
  • 2
    Bus - C4C4
    Wait for bus
    C4
    West To Twinbrook Station
  • 3
    Ride to bus station
    Ride to bus station
    Takoma Langley Crossroads Transit Center + Bus Bay A
    19 min
  • 4
    Bus - K6K6
    Wait for bus
    K6
    North To White Oak
  • 5
    Ride to bus station
    Ride to bus station
    New Hampshire Av+Powder Mill Rd
    ID 2000364
    11 min
  • 6
    Walk to bus station
    Walk to bus station
    Powder Mill Rd & New Hampshire Ave
    ID 25036
    90 yd • 2 min
  • 7
    Bus - 2727
    Wait for bus
    27
    Tech Rd Via Adventist Healthcare
  • 8
    Ride to bus station
    Ride to bus station
    Powder Mill Rd + Boxer Rd
    6 min
  • 9
    Walk to Beltsville
    Walk to
    Beltsville
    1.08 mi • 22 min
*Duration based on 8am traffic

Alternative route by bus via C4, Z8 and 27

To get from Hyattsville Crossing Metro Station to Beltsville in Washington, D.C. - Baltimore, MD, you’ll need to take 3 bus lines: take the C4 bus from Pg Plaza Station station to Colesville Rd & W University Bv station. Next, you’ll have to switch to the Z8 bus and finally take the 27 bus from Tech Rd & Columbia Pike station to Powder Mill Rd + Cherry Mill Rd station. The total trip duration for this route is approximately 1 hr 43 min. The ride fare is $5.00.

103min$5.00
Walk to bus station
Bus - C4C4
Bus - Z8Z8
Bus - 2727
Walk to Beltsville
Leaves from Pg Plaza Station

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Pg Plaza Station
    20 yd • 1 min
  • 2
    Bus - C4C4
    Wait for bus
    C4
    West To Twinbrook Station
  • 3
    Ride to bus station
    Ride to bus station
    Colesville Rd & W University Bv
    29 min
  • 4
    Walk to bus station
    Walk to bus station
    Colesville Rd & University Blvd
    170 yd • 3 min
  • 5
    Bus - Z8Z8
    Wait for bus
    Z8
    North To Briggs Chaney Park & Ride
  • 6
    Ride to bus station
    Ride to bus station
    Tech Rd & Old Columbia Pi
    13 min
  • 7
    Walk to bus station
    Walk to bus station
    Tech Rd & Columbia Pike
    ID 30217
    10 yd • 1 min
  • 8
    Bus - 2727
    Wait for bus
    27
    Hillandale Via Adventist Healthcare
  • 9
    Ride to bus station
    Ride to bus station
    Powder Mill Rd + Cherry Mill Rd
    15 min
  • 10
    Walk to Beltsville
    Walk to
    Beltsville
    1.14 mi • 24 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Hyattsville Crossing Metro Station to Beltsville

The distance between Hyattsville Crossing Metro Station, Washington, D.C. - Baltimore, MD and Beltsville, Washington, D.C. - Baltimore, MD is approximately 9.95 mi, which can typically be travelled in 98 min. Moovit will show you the directions from Hyattsville Crossing Metro Station to Beltsville by bus, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Public transit stations close to Hyattsville Crossing Metro Station

Hyattsville Crossing Metro Station is located at Hyattsville Crossing Metro Station, Washington, D.C. - Baltimore, MD and the nearest public transit station is Hyattsville Crossing Metrorail Station at Bus Bay D.

Metro stations close to Hyattsville Crossing Metro Station:

  • Hyattsville Crossing Metrorail Station
  • West Hyattsville Metrorail Station
  • West Hyattsville

Train stations close to Hyattsville Crossing Metro Station:

  • College Park
  • Riverdale

Bus stations close to Hyattsville Crossing Metro Station:

  • Hyattsville Crossing Metrorail Station at Bus Bay D
  • Hyattsville Crossing Metrorail Station at Bus Bay F
  • Pg Plaza Station + Bus Bay H

Public transit stations close to Beltsville, Washington, D.C. - Baltimore, MD

Beltsville is located at Beltsville, Washington, D.C. - Baltimore, MD and the nearest public transit station is Jayrose Bl+Cherry Hill Rd.

Metro stations close to Beltsville:

  • Greenbelt

Train stations close to Beltsville:

  • Greenbelt

Bus stations close to Beltsville:

  • Jayrose Bl+Cherry Hill Rd
  • Seven Springs Vil+#9300
  • Seven Springs Village & #9308

Related Routes

Alternative route by bus via C4, Z8 and 27

To get from Hyattsville Crossing Metro Station to Beltsville in Washington, D.C. - Baltimore, MD, you’ll need to take 3 bus lines: take the C4 bus from Pg Plaza Station station to Colesville Rd & W University Bv station. Next, you’ll have to switch to the Z8 bus and finally take the 27 bus from Tech Rd & Columbia Pike station to Powder Mill Rd + Cherry Mill Rd station. The total trip duration for this route is approximately 1 hr 43 min. The ride fare is $5.00.

103min$5.00
Walk to bus station
Bus - C4C4
Bus - Z8Z8
Bus - 2727
Walk to Beltsville
Leaves from Pg Plaza Station

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Pg Plaza Station
    20 yd • 1 min
  • 2
    Bus - C4C4
    Wait for bus
    C4
    West To Twinbrook Station
  • 3
    Ride to bus station
    Ride to bus station
    Colesville Rd & W University Bv
    29 min
  • 4
    Walk to bus station
    Walk to bus station
    Colesville Rd & University Blvd
    170 yd • 3 min
  • 5
    Bus - Z8Z8
    Wait for bus
    Z8
    North To Briggs Chaney Park & Ride
  • 6
    Ride to bus station
    Ride to bus station
    Tech Rd & Old Columbia Pi
    13 min
  • 7
    Walk to bus station
    Walk to bus station
    Tech Rd & Columbia Pike
    ID 30217
    10 yd • 1 min
  • 8
    Bus - 2727
    Wait for bus
    27
    Hillandale Via Adventist Healthcare
  • 9
    Ride to bus station
    Ride to bus station
    Powder Mill Rd + Cherry Mill Rd
    15 min
  • 10
    Walk to Beltsville
    Walk to
    Beltsville
    1.14 mi • 24 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Hyattsville Crossing Metro Station to Beltsville?

    The fastest way takes 98 minutes, using Bus line C4, Bus line K6, Bus line 27.

  • What is the alternative route to get from Hyattsville Crossing Metro Station to Beltsville?

    The alternative route takes 103 minutes, using Bus line C4, Bus line Z8, Bus line 27.

  • Is there a direct bus between Hyattsville Crossing Metro Station and Beltsville?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 1 hr 38 min.

  • Which bus line goes from Hyattsville Crossing Metro Station to Beltsville?

    The C4 bus line goes from Pg Plaza Station station near Hyattsville Crossing Metro Station in Prince George's County to West To Twinbrook Station station. From there you’ll have to take one bus line till West To Twinbrook Station station near Beltsville in Washington, D.C. - Baltimore, MD.

  • How long does it take to travel from Hyattsville Crossing Metro Station to Beltsville by bus?

    The total travel time between Hyattsville Crossing Metro Station in Prince George's County and Beltsville in Washington, D.C. - Baltimore, MD by bus is about 1 hr 38 min.

  • Where do I get on the bus near Hyattsville Crossing Metro Station to get to Beltsville?

    Get on the C4 bus from the Pg Plaza Station stop near Hyattsville Crossing Metro Station in Prince George's County.

  • Where do I get off the bus when travelling between Hyattsville Crossing Metro Station and Beltsville?

    Get off the bus at the West To Twinbrook Station stop, which is closest to Beltsville in Washington, D.C. - Baltimore, MD.

  • When is the first metro from Hyattsville Crossing Metro Station to Beltsville?

    The first metro from Hyattsville Crossing Metro Station in Prince George's County to Beltsville in Washington, D.C. - Baltimore, MD is Metrorail Green Line. It leaves the Hyattsville Crossing Metro Station station at 8:01 PM.

  • How much is the bus fare from Hyattsville Crossing Metro Station to Beltsville?

    The ride from Hyattsville Crossing Metro Station to Beltsville costs $5.00.

Real-Time Arrivals, Schedules, Maps & More