How to get from E Light Dr & Stateside Rd to Beltsville, Maryland by bus?
From E Light Dr & Stateside Rd to Beltsville, Maryland by bus
To get from E Light Dr & Stateside Rd to Beltsville, Maryland in Prince George's County, you’ll need to take 3 bus lines: take the K6 bus from New Hampshire Av+Dilston Rd station to New Hampshire Ave & University Blvd station. Next, you’ll have to switch to the C2 bus and finally take the 302 bus from Greenbelt Metro Dr & Cherrywood Ln station to Us 1 @ Powdermill Rd station. The total trip duration for this route is approximately 1 hr 12 min. The ride fare is $6.00.
Step by Step
- 1Walk to bus stationNew Hampshire Av+Dilston RdID 2000305690 yd • 8 min
- 2Wait for busK6South To Fort Totten
- 3Ride to bus stationNew Hampshire Ave & University Blvd11 min
- 4Walk to bus stationTakoma-Langley Crossroads Transit Center Bus Bay D130 yd • 2 min
- 5Wait for busC2East To Greenbelt
- 6Ride to bus stationGreenbelt Metro Dr & Cherrywood LnID 300257828 min
- 7Walk to bus stationGreenbelt Metro Dr & Cherrywood LnID 300257910 yd • 1 min
- 8Wait for bus302Towne Centre Laurel
- 9Ride to bus stationUs 1 @ Powdermill Rd10 min
- 10Walk toBeltsville, Maryland210 yd • 3 min
Alternative route from E Light Dr & Stateside Rd to Beltsville, Maryland by bus via K9, C2 and 302
To get from E Light Dr & Stateside Rd to Beltsville, Maryland in Prince George's County, you’ll need to take 3 bus lines: take the K9 bus from New Hampshire Av+Northampton Dr station to New Hampshire Ave & University Blvd station. Next, you’ll have to switch to the C2 bus and finally take the 302 bus from Greenbelt Metro Dr & Cherrywood Ln station to Us 1 @ Powdermill Rd station. The total trip duration for this route is approximately 1 hr 4 min. The ride fare is $6.00.
Step by Step
- 1Walk to bus stationNew Hampshire Av+Northampton DrID 30042750.57 mi • 12 min
- 2Wait for busK9South To Fort Totten
- 3Ride to bus stationNew Hampshire Ave & University Blvd3 min
- 4Walk to bus stationTakoma-Langley Crossroads Transit Center Bus Bay D130 yd • 2 min
- 5Wait for busC2East To Greenbelt
- 6Ride to bus stationGreenbelt Metro Dr & Cherrywood LnID 300257828 min
- 7Walk to bus stationGreenbelt Metro Dr & Cherrywood LnID 300257910 yd • 1 min
- 8Wait for bus302Towne Centre Laurel
- 9Ride to bus stationUs 1 @ Powdermill Rd10 min
- 10Walk toBeltsville, Maryland210 yd • 3 min
Public transit directions from E Light Dr & Stateside Rd to Beltsville, Maryland
Public transit stations close to E Light Dr & Stateside Rd
E Light Dr & Stateside Rd is located at E Light Dr & Stateside Rd, Prince George's County and the nearest public transit station is Northampton Dr & Colony Rd.
Bus stations close to E Light Dr & Stateside Rd:
- Northampton Dr & Colony Rd
- Northampton Dr & Beacon Rd
- Oakview Dr & Cottrell Terr
Public transit stations close to Beltsville, Maryland, Prince George's County
Beltsville, Maryland is located at Beltsville, Maryland, Prince George's County and the nearest public transit station is Baltimore Ave & Sellman Rd.
Metro stations close to Beltsville, Maryland:
- Greenbelt
Train stations close to Beltsville, Maryland:
- Greenbelt
- Muirkirk
Bus stations close to Beltsville, Maryland:
- Baltimore Ave & Sellman Rd
- Baltimore Ave at Powder Mill Rd
- Baltimore Avenue And Powder Mill Road (Southbound)
Related Routes
- Holabird & Searles FS Wb to Beltsville, Maryland
- Owings Mills Town Center Wb to Beltsville, Maryland
- Reisterstown Rd & Mchenry Ave Sb to Beltsville, Maryland
- Lutherville Station to Beltsville, Maryland
- Hyattsville Crossing (Drop-Off) to Beltsville, Maryland
- Ridgland Rd & Cranbrook Rd Sb to Beltsville, Maryland
- Bus Stop at Timonium Fairgrounds Light Rail Station Sb to Beltsville, Maryland
- 301 Hospital Dr Eb to Beltsville, Maryland
- Baltimore Annapolis Blvd & Marbury Rd Sb to Beltsville, Maryland
- Ring Rd & Aacc Eb to Beltsville, Maryland
- West St & Church Cir to Beltsville, Maryland
- Ritchie Hwy & Mva Nb to Beltsville, Maryland
- Security Square Mall to Beltsville, Maryland
- Belair Rd & Overlea Ave Nb to Beltsville, Maryland
- White Marsh Mall to Beltsville, Maryland
- Harford & Kentucky Nb to Beltsville, Maryland
- Northern Pkwy & York Rd Eb to Beltsville, Maryland
- Northern Pkwy & Mcclean Blvd FS Eb to Beltsville, Maryland
- Craigmont Rd & Westview Mall Opp Wb to Beltsville, Maryland
- Back River Neck Rd & Lanflair Rd Sb to Beltsville, Maryland
Alternative route from E Light Dr & Stateside Rd to Beltsville, Maryland by bus via K9, C2 and 302
To get from E Light Dr & Stateside Rd to Beltsville, Maryland in Prince George's County, you’ll need to take 3 bus lines: take the K9 bus from New Hampshire Av+Northampton Dr station to New Hampshire Ave & University Blvd station. Next, you’ll have to switch to the C2 bus and finally take the 302 bus from Greenbelt Metro Dr & Cherrywood Ln station to Us 1 @ Powdermill Rd station. The total trip duration for this route is approximately 1 hr 4 min. The ride fare is $6.00.
Step by Step
- 1Walk to bus stationNew Hampshire Av+Northampton DrID 30042750.57 mi • 12 min
- 2Wait for busK9South To Fort Totten
- 3Ride to bus stationNew Hampshire Ave & University Blvd3 min
- 4Walk to bus stationTakoma-Langley Crossroads Transit Center Bus Bay D130 yd • 2 min
- 5Wait for busC2East To Greenbelt
- 6Ride to bus stationGreenbelt Metro Dr & Cherrywood LnID 300257828 min
- 7Walk to bus stationGreenbelt Metro Dr & Cherrywood LnID 300257910 yd • 1 min
- 8Wait for bus302Towne Centre Laurel
- 9Ride to bus stationUs 1 @ Powdermill Rd10 min
- 10Walk toBeltsville, Maryland210 yd • 3 min
Questions & Answers
What is the fastest way to get from E Light Dr & Stateside Rd to Beltsville, Maryland?
The fastest way takes 72 minutes, using Bus line K6, Bus line C2, Bus line 302.
What is the alternative route to get from E Light Dr & Stateside Rd to Beltsville, Maryland?
The alternative route takes 64 minutes, using Bus line K9, Bus line C2, Bus line 302.
Is there a direct bus between E Light Dr & Stateside Rd and Beltsville, Maryland?
No, you’ll have to take 3 bus lines in total. The total travelling time is 1 hr 12 min.
Which bus line goes from E Light Dr & Stateside Rd to Beltsville, Maryland?
The K6 bus line goes from New Hampshire Av+Dilston Rd station near E Light Dr & Stateside Rd in Montgomery County to South To Fort Totten station. From there you’ll have to take one bus line till South To Fort Totten station near Beltsville, Maryland in Prince George's County.
How long does it take to travel from E Light Dr & Stateside Rd to Beltsville, Maryland by bus?
The total travel time between E Light Dr & Stateside Rd in Montgomery County and Beltsville, Maryland in Prince George's County by bus is about 1 hr 12 min.
Where do I get on the bus near E Light Dr & Stateside Rd to get to Beltsville, Maryland?
Get on the K6 bus from the New Hampshire Av+Dilston Rd stop near E Light Dr & Stateside Rd in Montgomery County.
Where do I get off the bus when travelling between E Light Dr & Stateside Rd and Beltsville, Maryland?
Get off the bus at the South To Fort Totten stop, which is closest to Beltsville, Maryland in Prince George's County.
How much is the bus fare from E Light Dr & Stateside Rd to Beltsville, Maryland?
The ride from E Light Dr & Stateside Rd to Beltsville, Maryland costs $6.00.