How to get from Elkton to Bladensburg by bus and train?

By bus and train

To get from Elkton to Bladensburg in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 4 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the T14 bus from New Carrollton Metro Station Bay K station to Annapolis Rd & 46th St station. The total trip duration for this route is approximately 2 hr 45 min.

165min
Bus - ROUTE 4ROUTE 4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - T14T14
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 4ROUTE 4
    Wait for bus
    ROUTE 4
    Loop
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    29 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Newport News
  • 5
    Ride to train station
    Ride to train station
    New Carrollton, Md
    70 min
  • 6
    Walk to bus station
    Walk to bus station
    New Carrollton Metro Station Bay K
    ID 3002867
    10 yd • 1 min
  • 7
    Bus - T14T14
    Wait for bus
    T14
    West To Rhode Island Ave Station
  • 8
    Ride to bus station Annapolis Rd & 46th St
    Ride to bus station
    Annapolis Rd & 46th St
    ID 3001439
    30 min
*Duration based on 8am traffic

Alternative route by bus and train via ROUTE 4, NORTHEAST REGIONAL and T18

To get from Elkton to Bladensburg in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 4 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the T18 bus from New Carrollton Metro Station Bay K station to Annapolis Rd & 46th St station. The total trip duration for this route is approximately 2 hr 50 min.

170min
Bus - ROUTE 4ROUTE 4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - T18T18
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 4ROUTE 4
    Wait for bus
    ROUTE 4
    Loop
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    29 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Newport News
  • 5
    Ride to train station
    Ride to train station
    New Carrollton, Md
    70 min
  • 6
    Walk to bus station
    Walk to bus station
    New Carrollton Metro Station Bay K
    ID 3002867
    10 yd • 1 min
  • 7
    Bus - T18T18
    Wait for bus
    T18
    West To Rhode Island Ave Station
  • 8
    Ride to bus station Annapolis Rd & 46th St
    Ride to bus station
    Annapolis Rd & 46th St
    ID 3001439
    25 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Elkton to Bladensburg

The distance between Elkton, Washington, D.C. - Baltimore, MD and Bladensburg, Washington, D.C. - Baltimore, MD is approximately 103.09 mi, which can typically be travelled in 165 min. Moovit will show you the directions from Elkton to Bladensburg by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Public transit stations close to Elkton

Elkton is located at Elkton, Washington, D.C. - Baltimore, MD and the nearest public transit station is Chesapeake Blvd. After Mva.

Bus stations close to Elkton:

  • Chesapeake Blvd. After Mva
  • Rt 40 - Chili's
  • Super Wal-Mart

Public transit stations close to Bladensburg, Washington, D.C. - Baltimore, MD

Bladensburg is located at Bladensburg, Washington, D.C. - Baltimore, MD and the nearest public transit station is Annapolis Rd & Edmonston Rd.

Metro stations close to Bladensburg:

  • West Hyattsville Metrorail Station
  • West Hyattsville
  • Hyattsville Crossing Metro Station

Train stations close to Bladensburg:

  • Riverdale

Bus stations close to Bladensburg:

  • Annapolis Rd & Edmonston Rd
  • Bladensburg Rd & 43rd Av
  • Edmonston Rd+Annapolis Rd

Related Routes

Alternative route by bus and train via ROUTE 4, NORTHEAST REGIONAL and T18

To get from Elkton to Bladensburg in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 4 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the T18 bus from New Carrollton Metro Station Bay K station to Annapolis Rd & 46th St station. The total trip duration for this route is approximately 2 hr 50 min.

170min
Bus - ROUTE 4ROUTE 4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - T18T18
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 4ROUTE 4
    Wait for bus
    ROUTE 4
    Loop
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    29 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Newport News
  • 5
    Ride to train station
    Ride to train station
    New Carrollton, Md
    70 min
  • 6
    Walk to bus station
    Walk to bus station
    New Carrollton Metro Station Bay K
    ID 3002867
    10 yd • 1 min
  • 7
    Bus - T18T18
    Wait for bus
    T18
    West To Rhode Island Ave Station
  • 8
    Ride to bus station Annapolis Rd & 46th St
    Ride to bus station
    Annapolis Rd & 46th St
    ID 3001439
    25 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Elkton to Bladensburg?

    The fastest way takes 165 minutes, using Bus line ROUTE 4, Bus line NORTHEAST REGIONAL, Bus line T14.

  • What is the alternative route to get from Elkton to Bladensburg?

    The alternative route takes 170 minutes, using Bus line ROUTE 4, Bus line NORTHEAST REGIONAL, Bus line T18.

  • Is there a direct bus between Elkton and Bladensburg in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 2 hr 45 min.

  • Which bus line goes from Elkton to Bladensburg in Washington, D.C. - Baltimore, MD?

    The ROUTE 4 bus line goes from Loop station near Elkton to Newark Amtrak station. From there you’ll have to take one bus line and one train line till Newark Amtrak station near Bladensburg in Washington, D.C. - Baltimore, MD

  • How long does it take to travel from Elkton to Bladensburg in Washington, D.C. - Baltimore, MD by bus and train?

    The total travel time between Elkton and Bladensburg in Washington, D.C. - Baltimore, MD by bus and train is about 2 hr 45 min.

  • Where do I get on the bus near Elkton to get to Bladensburg in Washington, D.C. - Baltimore, MD?

    Get on the ROUTE 4 bus from the Loop stop near Elkton in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when travelling between Elkton and Bladensburg in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Newark Amtrak stop, which is closest to Bladensburg in Washington, D.C. - Baltimore, MD.

Real-Time Arrivals, Schedules, Maps & More