How to get from Elkton to Brandywine by bus and train?

By bus and train

To get from Elkton to Brandywine in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 4 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the 735 bus from Massachusetts Ave & Columbus Cir NE Eb station to Brandywine Park & Ride station. The total trip duration for this route is approximately 7 hr 43 min.

463min
Bus - ROUTE 4ROUTE 4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 735735
Walk to Brandywine
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 4ROUTE 4
    Wait for bus
    ROUTE 4
    Loop
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    51 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Washington
  • 5
    Ride to train station
    Ride to train station
    Union Station
    94 min
  • 6
    Walk to bus station
    Walk to bus station
    Massachusetts Ave & Columbus Cir NE Eb
    ID 11562
    260 yd • 4 min
  • 7
    Bus - 735735
    Wait for bus
    735
    735/8 Charlotte Hall
  • 8
    Ride to bus station
    Ride to bus station
    Brandywine Park & Ride
    ID 32503
    63 min
  • 9
    Walk to Brandywine
    Walk to
    Brandywine
    0.55 mi • 12 min
*Duration based on 8am traffic

Alternative route by bus and train via ROUTE 5, NORTHEAST REGIONAL and 735

To get from Elkton to Brandywine in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 5 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the 735 bus from Massachusetts Ave & Columbus Cir NE Eb station to Brandywine Park & Ride station. The total trip duration for this route is approximately 8 hr 8 min.

488min
Bus - ROUTE 5ROUTE 5
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 735735
Walk to Brandywine
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 5ROUTE 5
    Wait for bus
    ROUTE 5
    Newark Train Station
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    15 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Washington
  • 5
    Ride to train station
    Ride to train station
    Union Station
    94 min
  • 6
    Walk to bus station
    Walk to bus station
    Massachusetts Ave & Columbus Cir NE Eb
    ID 11562
    260 yd • 4 min
  • 7
    Bus - 735735
    Wait for bus
    735
    735/8 Charlotte Hall
  • 8
    Ride to bus station
    Ride to bus station
    Brandywine Park & Ride
    ID 32503
    63 min
  • 9
    Walk to Brandywine
    Walk to
    Brandywine
    0.55 mi • 12 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Elkton to Brandywine

The distance between Elkton, Washington, D.C. - Baltimore, MD and Brandywine, Washington, D.C. - Baltimore, MD is approximately 131.7 mi, which can typically be travelled in 463 min. Moovit will show you the directions from Elkton to Brandywine by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Public transit stations close to Elkton

Elkton is located at Elkton, Washington, D.C. - Baltimore, MD and the nearest public transit station is Chesapeake Blvd. After Mva.

Bus stations close to Elkton:

  • Chesapeake Blvd. After Mva
  • Rt 40 - Chili's
  • Super Wal-Mart

Public transit stations close to Brandywine, Washington, D.C. - Baltimore, MD

Brandywine is located at Brandywine, Washington, D.C. - Baltimore, MD and the nearest public transit station is Brandywine Park & Ride.

Bus stations close to Brandywine:

  • Brandywine Park & Ride
  • Brandywine Road at Gwynn Park High School

Related Routes

Alternative route by bus and train via ROUTE 5, NORTHEAST REGIONAL and 735

To get from Elkton to Brandywine in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 5 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the 735 bus from Massachusetts Ave & Columbus Cir NE Eb station to Brandywine Park & Ride station. The total trip duration for this route is approximately 8 hr 8 min.

488min
Bus - ROUTE 5ROUTE 5
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 735735
Walk to Brandywine
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 5ROUTE 5
    Wait for bus
    ROUTE 5
    Newark Train Station
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    15 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Washington
  • 5
    Ride to train station
    Ride to train station
    Union Station
    94 min
  • 6
    Walk to bus station
    Walk to bus station
    Massachusetts Ave & Columbus Cir NE Eb
    ID 11562
    260 yd • 4 min
  • 7
    Bus - 735735
    Wait for bus
    735
    735/8 Charlotte Hall
  • 8
    Ride to bus station
    Ride to bus station
    Brandywine Park & Ride
    ID 32503
    63 min
  • 9
    Walk to Brandywine
    Walk to
    Brandywine
    0.55 mi • 12 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Elkton to Brandywine?

    The fastest way takes 463 minutes, using Bus line ROUTE 4, Bus line NORTHEAST REGIONAL, Bus line 735.

  • What is the alternative route to get from Elkton to Brandywine?

    The alternative route takes 488 minutes, using Bus line ROUTE 5, Bus line NORTHEAST REGIONAL, Bus line 735.

  • Is there a direct bus between Elkton and Brandywine in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 7 hr 43 min.

  • Which bus line goes from Elkton to Brandywine in Washington, D.C. - Baltimore, MD?

    The ROUTE 4 bus line goes from Loop station near Elkton to Newark Amtrak station. From there you’ll have to take one bus line and one train line till Newark Amtrak station near Brandywine in Washington, D.C. - Baltimore, MD

  • How long does it take to travel from Elkton to Brandywine in Washington, D.C. - Baltimore, MD by bus and train?

    The total travel time between Elkton and Brandywine in Washington, D.C. - Baltimore, MD by bus and train is about 7 hr 43 min.

  • Where do I get on the bus near Elkton to get to Brandywine in Washington, D.C. - Baltimore, MD?

    Get on the ROUTE 4 bus from the Loop stop near Elkton in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when travelling between Elkton and Brandywine in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Newark Amtrak stop, which is closest to Brandywine in Washington, D.C. - Baltimore, MD.

Real-Time Arrivals, Schedules, Maps & More