Skip to main content

How to get from Annandale Rd + Brice St to Clarksville, Maryland by bus and metro?

By bus and metro

To get from Annandale Rd + Brice St to Clarksville, Maryland in Howard County, you’ll need to take 2 bus lines and one metro line: take the 803 bus from Annandale Rd + Brice St station to East Falls Church Metro Bay C station. Next, you’ll have to switch to the METRORAIL SILVER LINE metro and finally take the 345 bus from 19th St & K St NW FS Sb station to Clarksville Park & Ride station. The total trip duration for this route is approximately 3 hr 15 min. The ride fare is $5.45.

195min$5.45
Bus - 803803
Metro - METRORAIL SILVER LINE
Bus - 345345
Walk to Clarksville, Maryland
Leaves from Annandale Rd + Brice St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Annandale Rd + Brice St
  • 2
    Bus - 803803
    Wait for bus
    803
    803 East Falls Church Metro
  • 3
    Ride to bus station
    Ride to bus station
    East Falls Church Metro Bay C
    9 min
  • 4
    Walk to metro station
    Walk to metro station
    East Falls Church
    110 yd • 2 min
  • 5
    Metro - METRORAIL SILVER LINE
    Wait for metro
    METRORAIL SILVER LINE
    Largo
  • 6
    Ride to metro station
    Ride to metro station
    Farragut West Metrorail Station
    17 min
  • 7
    Walk to bus station
    Walk to bus station
    19th St & K St NW FS Sb
    ID 11619
    230 yd • 3 min
  • 8
    Bus - 345345
    Wait for bus
    345
    345/8 Clarksville Park & Ride
  • 9
    Ride to bus station
    Ride to bus station
    Clarksville Park & Ride
    ID 11930
    117 min
  • 10
    Walk to Clarksville, Maryland
    Walk to
    Clarksville, Maryland
    550 yd • 7 min
*Duration based on 8am traffic

Alternative route by bus and metro via 803, METRORAIL ORANGE LINE and 345

To get from Annandale Rd + Brice St to Clarksville, Maryland in Howard County, you’ll need to take 2 bus lines and one metro line: take the 803 bus from Annandale Rd + Brice St station to East Falls Church Metro Bay C station. Next, you’ll have to switch to the METRORAIL ORANGE LINE metro and finally take the 345 bus from 19th St & K St NW FS Sb station to Clarksville Park & Ride station. The total trip duration for this route is approximately 3 hr 15 min. The ride fare is $5.45.

195min$5.45
Bus - 803803
Metro - METRORAIL ORANGE LINE
Bus - 345345
Walk to Clarksville, Maryland
Leaves from Annandale Rd + Brice St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Annandale Rd + Brice St
  • 2
    Bus - 803803
    Wait for bus
    803
    803 East Falls Church Metro
  • 3
    Ride to bus station
    Ride to bus station
    East Falls Church Metro Bay C
    9 min
  • 4
    Walk to metro station
    Walk to metro station
    East Falls Church
    110 yd • 2 min
  • 5
    Metro - METRORAIL ORANGE LINE
    Wait for metro
    METRORAIL ORANGE LINE
    New Carrollton
  • 6
    Ride to metro station
    Ride to metro station
    Farragut West Metrorail Station
    17 min
  • 7
    Walk to bus station
    Walk to bus station
    19th St & K St NW FS Sb
    ID 11619
    230 yd • 3 min
  • 8
    Bus - 345345
    Wait for bus
    345
    345/8 Clarksville Park & Ride
  • 9
    Ride to bus station
    Ride to bus station
    Clarksville Park & Ride
    ID 11930
    117 min
  • 10
    Walk to Clarksville, Maryland
    Walk to
    Clarksville, Maryland
    550 yd • 7 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Annandale Rd + Brice St to Clarksville, Maryland

The distance between Annandale Rd + Brice St, Howard County and Clarksville, Maryland, Howard County is approximately 61.4 mi, which can typically be travelled in 195 min. Moovit will show you the directions from Annandale Rd + Brice St to Clarksville, Maryland by bus and metro, so no matter how you choose to travel in Howard County – you will always have plenty of easy options.

Public transit stations close to Annandale Rd + Brice St

Annandale Rd + Brice St is located at Annandale Rd + Brice St, Howard County and the nearest public transit station is Annandale Rd + Scipio La.

Metro stations close to Annandale Rd + Brice St:

  • East Falls Church
  • West Falls Church-Vt

Bus stations close to Annandale Rd + Brice St:

  • Annandale Rd + Scipio La
  • Annandale Rd & Hillwood Rd
  • Annandale Rd And Hillwood Rd

Public transit stations close to Clarksville, Maryland, Howard County

Clarksville, Maryland is located at Clarksville, Maryland, Howard County and the nearest public transit station is Clarksville Park & Ride.

Bus stations close to Clarksville, Maryland:

  • Clarksville Park & Ride

Alternative route by bus and metro via 803, METRORAIL ORANGE LINE and 345

To get from Annandale Rd + Brice St to Clarksville, Maryland in Howard County, you’ll need to take 2 bus lines and one metro line: take the 803 bus from Annandale Rd + Brice St station to East Falls Church Metro Bay C station. Next, you’ll have to switch to the METRORAIL ORANGE LINE metro and finally take the 345 bus from 19th St & K St NW FS Sb station to Clarksville Park & Ride station. The total trip duration for this route is approximately 3 hr 15 min. The ride fare is $5.45.

195min$5.45
Bus - 803803
Metro - METRORAIL ORANGE LINE
Bus - 345345
Walk to Clarksville, Maryland
Leaves from Annandale Rd + Brice St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Annandale Rd + Brice St
  • 2
    Bus - 803803
    Wait for bus
    803
    803 East Falls Church Metro
  • 3
    Ride to bus station
    Ride to bus station
    East Falls Church Metro Bay C
    9 min
  • 4
    Walk to metro station
    Walk to metro station
    East Falls Church
    110 yd • 2 min
  • 5
    Metro - METRORAIL ORANGE LINE
    Wait for metro
    METRORAIL ORANGE LINE
    New Carrollton
  • 6
    Ride to metro station
    Ride to metro station
    Farragut West Metrorail Station
    17 min
  • 7
    Walk to bus station
    Walk to bus station
    19th St & K St NW FS Sb
    ID 11619
    230 yd • 3 min
  • 8
    Bus - 345345
    Wait for bus
    345
    345/8 Clarksville Park & Ride
  • 9
    Ride to bus station
    Ride to bus station
    Clarksville Park & Ride
    ID 11930
    117 min
  • 10
    Walk to Clarksville, Maryland
    Walk to
    Clarksville, Maryland
    550 yd • 7 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Annandale Rd + Brice St to Clarksville, Maryland?

    The fastest way takes 195 minutes, using Bus line 803, Bus line METRORAIL SILVER LINE, Bus line 345.

  • What is the alternative route to get from Annandale Rd + Brice St to Clarksville, Maryland?

    The alternative route takes 195 minutes, using Bus line 803, Bus line METRORAIL ORANGE LINE, Bus line 345.

  • Is there a direct bus between Annandale Rd + Brice St and Clarksville, Maryland?

    No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 3 hr 15 min.

  • Which bus line goes from Annandale Rd + Brice St to Clarksville, Maryland?

    The 803 bus line goes from 803 East Falls Church Metro station near Annandale Rd + Brice St in Fairfax County to East Falls Church Metro Bay C station. From there you’ll have to take one bus line and one metro line till East Falls Church Metro Bay C station near Clarksville, Maryland in Howard County.

  • How long does it take to travel from Annandale Rd + Brice St to Clarksville, Maryland by bus and metro?

    The total travel time between Annandale Rd + Brice St in Fairfax County and Clarksville, Maryland in Howard County by bus and metro is about 3 hr 15 min.

  • Where do I get on the bus near Annandale Rd + Brice St to get to Clarksville, Maryland?

    Get on the 803 bus from the 803 East Falls Church Metro stop near Annandale Rd + Brice St in Fairfax County.

  • Where do I get off the bus when travelling between Annandale Rd + Brice St and Clarksville, Maryland?

    Get off the bus at the East Falls Church Metro Bay C stop, which is closest to Clarksville, Maryland in Howard County.

  • How much is the total bus and metro fare from Annandale Rd + Brice St to Clarksville, Maryland?

    The ride from Annandale Rd + Brice St to Clarksville, Maryland costs $5.45.

Real-Time Arrivals, Schedules, Maps & More