How to get from Culpeper to Clinton by bus and train?
Culpeper to Clinton map
From Culpeper to Clinton by bus and train
To get from Culpeper to Clinton in Washington, D.C. - Baltimore, MD, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Union Station station. Next, you’ll have to switch to the 735 bus and finally take the 30 bus from Suitland Metrorail Station at Bus Bay D station to Stuart Lane at Woodyard Road station. The total trip duration for this route is approximately 4 hr 22 min.
Step by Step
- 1Start from train stationCulpeper
- 2Wait for trainNORTHEAST REGIONALNew York
- 3Ride to train stationUnion Station96 min
- 4Walk to bus stationMassachusetts Ave & Columbus Cir NE EbID 11562260 yd • 4 min
- 5Wait for bus735735/5 Charlotte Hall
- 6Ride to bus stationSuitland Metro StationID 1155140 min
- 7Walk to bus stationSuitland Metrorail Station at Bus Bay DID 34219200 yd • 3 min
- 8Wait for bus30Southern Maryland Hospital
- 9Ride to bus stationStuart Lane at Woodyard RoadID 3806342 min
- 10Walk toClinton140 yd • 2 min
Alternative route from Culpeper to Clinton by bus and train via NORTHEAST REGIONAL, 735 and 36
To get from Culpeper to Clinton in Washington, D.C. - Baltimore, MD, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Union Station station. Next, you’ll have to switch to the 735 bus and finally take the 36 bus from Brandywine Road at Gwynn Park High School station to Clinton Fringe Park & Ride station. The total trip duration for this route is approximately 4 hr 38 min.
Step by Step
- 1Start from train stationCulpeper
- 2Wait for trainNORTHEAST REGIONALNew York
- 3Ride to train stationUnion Station96 min
- 4Walk to bus stationMassachusetts Ave & Columbus Cir NE EbID 11562260 yd • 4 min
- 5Wait for bus735735/5 Charlotte Hall
- 6Ride to bus stationBrandywine Park & RideID 3250363 min
- 7Walk to bus stationBrandywine Road at Gwynn Park High SchoolID 333620.59 mi • 12 min
- 8Wait for bus36Clinton Fringe Parking Lot
- 9Ride to bus stationClinton Fringe Park & RideID 300017519 min
- 10Walk toClinton110 yd • 2 min
Public transit directions from Culpeper to Clinton
Public transit stations close to Culpeper
Culpeper is located at Culpeper, Washington, D.C. - Baltimore, MD and the nearest public transit station is 7-Eleven.
Train stations close to Culpeper:
- Culpeper Amtrak
Bus stations close to Culpeper:
- 7-Eleven
- Uva Imaging
- Culpeper Post Office
Public transit stations close to Clinton, Washington, D.C. - Baltimore, MD
Clinton is located at Clinton, Washington, D.C. - Baltimore, MD and the nearest public transit station is Clinton Fringe Park & Ride.
Bus stations close to Clinton:
- Clinton Fringe Park & Ride
- Stuart Lane at Woodyard Road
- Woody Terrace at Woodyard Road
Related Routes
- Drum Point to Clinton
- Solomons to Clinton
- Lusby to Clinton
- Charlestown to Clinton
- Danville to Clinton
- Norfolk to Clinton
- Stafford County to Clinton
- Prince George's County to Clinton
- Harrisonburg to Clinton
- Lynchburg to Clinton
- Roanoke to Clinton
- Mecklenburg County to Clinton
- Lexington to Clinton
- Loudoun County to Clinton
- Richmond to Clinton
- Rockbridge County to Clinton
- Berkeley County to Clinton
- Charles County to Clinton
- Prince Edward County to Clinton
- Saint Mary's County to Clinton
Culpeper to Clinton map
Alternative route from Culpeper to Clinton by bus and train via NORTHEAST REGIONAL, 735 and 36
To get from Culpeper to Clinton in Washington, D.C. - Baltimore, MD, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Union Station station. Next, you’ll have to switch to the 735 bus and finally take the 36 bus from Brandywine Road at Gwynn Park High School station to Clinton Fringe Park & Ride station. The total trip duration for this route is approximately 4 hr 38 min.
Step by Step
- 1Start from train stationCulpeper
- 2Wait for trainNORTHEAST REGIONALNew York
- 3Ride to train stationUnion Station96 min
- 4Walk to bus stationMassachusetts Ave & Columbus Cir NE EbID 11562260 yd • 4 min
- 5Wait for bus735735/5 Charlotte Hall
- 6Ride to bus stationBrandywine Park & RideID 3250363 min
- 7Walk to bus stationBrandywine Road at Gwynn Park High SchoolID 333620.59 mi • 12 min
- 8Wait for bus36Clinton Fringe Parking Lot
- 9Ride to bus stationClinton Fringe Park & RideID 300017519 min
- 10Walk toClinton110 yd • 2 min
Questions & Answers
What is the fastest way to get from Culpeper to Clinton?
The fastest way takes 262 minutes, using Bus line NORTHEAST REGIONAL, Bus line 735, Bus line 30.
What is the alternative route to get from Culpeper to Clinton?
The alternative route takes 278 minutes, using Bus line NORTHEAST REGIONAL, Bus line 735, Bus line 36.
Is there a direct train between Culpeper and Clinton in Washington, D.C. - Baltimore, MD?
No, you’ll have to take one train line and 2 bus lines in total. The total travelling time is 4 hr 22 min.
Which train line goes from Culpeper to Clinton in Washington, D.C. - Baltimore, MD?
The NORTHEAST REGIONAL train line goes from New York station near Culpeper to Union Station station. From there you’ll have to take 2 bus lines till Union Station station near Clinton in Washington, D.C. - Baltimore, MD
How long does it take to travel from Culpeper to Clinton in Washington, D.C. - Baltimore, MD by train and bus?
The total travel time between Culpeper and Clinton in Washington, D.C. - Baltimore, MD by train and bus is about 4 hr 22 min.
Where do I get on the train near Culpeper to get to Clinton in Washington, D.C. - Baltimore, MD?
Get on the NORTHEAST REGIONAL train from the New York station near Culpeper in Washington, D.C. - Baltimore, MD.
Where do I get off the train when travelling between Culpeper and Clinton in Washington, D.C. - Baltimore, MD?
Get off the train at the Union Station stop, which is closest to Clinton in Washington, D.C. - Baltimore, MD.