How to get from Halpine Rd & Rockville Pike to Clinton, MD by bus and metro?
By bus and metro
To get from Halpine Rd & Rockville Pike to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the METRORAIL RED LINE metro from Twinbrook Metro Station station to Gallery Place-Chinatown station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the 30 bus from Suitland Metrorail Station at Bus Bay D station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 1 hr 51 min. The ride fare is $7.00.
Step by Step
- 1Walk to metro stationTwinbrook Metro Station490 yd • 6 min
- 2Wait for metroMETRORAIL RED LINEFort Totten - Red
- 3Ride to metro stationGallery Place-Chinatown30 min
- 4Wait for metroMETRORAIL GREEN LINEBranch Ave
- 5Ride to metro stationSuitland Metro Station21 min
- 6Walk to bus stationSuitland Metrorail Station at Bus Bay DID 3421920 yd • 1 min
- 7Wait for bus30Southern Maryland Hospital
- 8Ride to bus stationPiscataway Road at Brandywine RoadID 3806040 min
- 9Walk toClinton, MD120 yd • 2 min
Alternative route by bus and metro via METRORAIL RED LINE, METRORAIL GREEN LINE and 36
To get from Halpine Rd & Rockville Pike to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the METRORAIL RED LINE metro from Twinbrook Metro Station station to Gallery Place-Chinatown station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the 36 bus from Branch Avenue Metrorail Station at Bus Bay J station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 1 hr 39 min. The ride fare is $7.00.
Step by Step
- 1Walk to metro stationTwinbrook Metro Station490 yd • 6 min
- 2Wait for metroMETRORAIL RED LINEFort Totten - Red
- 3Ride to metro stationGallery Place-Chinatown30 min
- 4Wait for metroMETRORAIL GREEN LINEBranch Ave
- 5Ride to metro stationBranch Avenue24 min
- 6Walk to bus stationBranch Avenue Metrorail Station at Bus Bay JID 3417430 yd • 1 min
- 7Wait for bus36Matapeake Business Drive
- 8Ride to bus stationBrandywine Road at Opp. Horseshoe RoadID 3335321 min
- 9Walk toClinton, MD190 yd • 3 min
Public transit directions from Halpine Rd & Rockville Pike to Clinton, MD
Public transit stations close to Halpine Rd & Rockville Pike
Halpine Rd & Rockville Pike is located at Halpine Rd & Rockville Pike, Prince George's County and the nearest public transit station is Halpine Rd & Rockville Pike.
Metro stations close to Halpine Rd & Rockville Pike:
- Twinbrook Metro Station
- North Bethesda
Train stations close to Halpine Rd & Rockville Pike:
- Rockville
- Rockville Amtrak
- Garrett Park
Bus stations close to Halpine Rd & Rockville Pike:
- Halpine Rd & Rockville Pike
- Rockville Pike & Halpine Rd
- Halpine Rd & Congressional Plaza
Public transit stations close to Clinton, MD, Prince George's County
Clinton, MD is located at Clinton, MD, Prince George's County and the nearest public transit station is Brandywine Road at Clinton Manor Drive.
Bus stations close to Clinton, MD:
- Brandywine Road at Clinton Manor Drive
- Piscataway Road at Hardesty Drive
- Piscataway Road at Gwynndale Drive
Related Routes
- Hyattsville Crossing (Drop-Off) to Clinton, MD
- Ring Rd & Aacc Eb to Clinton, MD
- West St & Church Cir to Clinton, MD
- White Marsh Mall to Clinton, MD
- Mta Light Rail Division to Clinton, MD
- Suitland Metro Station to Clinton, MD
- Us 301 P & R & Smallwood Dr to Clinton, MD
- Burtonsville Park & Ride to Clinton, MD
- Silver Spring Metro Station to Clinton, MD
- Tamar Dr & Cloudleap Ct Sb to Clinton, MD
- College Dr & Ring Rd East Nb FS to Clinton, MD
- Bwi Marshall Marc Station Sb to Clinton, MD
- Gaithersburg Park & Ride to Clinton, MD
- College Park Metro Station to Clinton, MD
- University Of Maryland College Park (Stadium Dr.) to Clinton, MD
- Route 1 @ Dumfries Rd to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Route 1 @ River Heritage Blvd to Clinton, MD
- Omniride Transit Center Departures to Clinton, MD
- Worth Ave @ Prince William Pkwy to Clinton, MD
Alternative route by bus and metro via METRORAIL RED LINE, METRORAIL GREEN LINE and 36
To get from Halpine Rd & Rockville Pike to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the METRORAIL RED LINE metro from Twinbrook Metro Station station to Gallery Place-Chinatown station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the 36 bus from Branch Avenue Metrorail Station at Bus Bay J station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 1 hr 39 min. The ride fare is $7.00.
Step by Step
- 1Walk to metro stationTwinbrook Metro Station490 yd • 6 min
- 2Wait for metroMETRORAIL RED LINEFort Totten - Red
- 3Ride to metro stationGallery Place-Chinatown30 min
- 4Wait for metroMETRORAIL GREEN LINEBranch Ave
- 5Ride to metro stationBranch Avenue24 min
- 6Walk to bus stationBranch Avenue Metrorail Station at Bus Bay JID 3417430 yd • 1 min
- 7Wait for bus36Matapeake Business Drive
- 8Ride to bus stationBrandywine Road at Opp. Horseshoe RoadID 3335321 min
- 9Walk toClinton, MD190 yd • 3 min
Questions & Answers
What is the fastest way to get from Halpine Rd & Rockville Pike to Clinton, MD?
The fastest way takes 111 minutes, using Bus line METRORAIL RED LINE, Bus line METRORAIL GREEN LINE, Bus line 30.
What is the alternative route to get from Halpine Rd & Rockville Pike to Clinton, MD?
The alternative route takes 99 minutes, using Bus line METRORAIL RED LINE, Bus line METRORAIL GREEN LINE, Bus line 36.
Is there a direct metro between Halpine Rd & Rockville Pike and Clinton, MD?
No, you’ll have to take 2 metro lines and one bus line in total. The total travelling time is 1 hr 51 min.
Which metro line goes from Halpine Rd & Rockville Pike to Clinton, MD?
The METRORAIL RED LINE metro line goes from Twinbrook Metro Station station near Halpine Rd & Rockville Pike in Montgomery County to Fort Totten - Red station. From there you’ll have to take one metro line and one bus line till Fort Totten - Red station near Clinton, MD in Prince George's County.
How long does it take to travel from Halpine Rd & Rockville Pike to Clinton, MD by metro and bus?
The total travel time between Halpine Rd & Rockville Pike in Montgomery County and Clinton, MD in Prince George's County by metro and bus is about 1 hr 51 min.
Where do I get on the metro near Halpine Rd & Rockville Pike to get to Clinton, MD?
Get on the METRORAIL RED LINE metro from the Twinbrook Metro Station station near Halpine Rd & Rockville Pike in Montgomery County.
Where do I get off the metro when travelling between Halpine Rd & Rockville Pike and Clinton, MD?
Get off the metro at the Fort Totten - Red stop, which is closest to Clinton, MD in Prince George's County.
How much is the total metro and bus fare from Halpine Rd & Rockville Pike to Clinton, MD?
The ride from Halpine Rd & Rockville Pike to Clinton, MD costs $7.00.