How to get from Weller Rd & Holdridge Rd to Clinton, MD by bus and metro?
By bus and metro
To get from Weller Rd & Holdridge Rd to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the METRO STATION CLOSURE SHUTTLE bus from Glenmont station to Fort Totten station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the 36 bus from Branch Avenue Metrorail Station at Bus Bay J station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 2 hr 3 min. The ride fare is $7.00.
Step by Step
- 1Walk to bus stationGlenmont0.54 mi • 12 min
- 2Wait for busMETRO STATION CLOSURE SHUTTLEFort Totten Metro
- 3Ride to bus stationFort Totten39 min
- 4Wait for metroMETRORAIL GREEN LINEBranch Ave
- 5Ride to metro stationBranch Avenue37 min
- 6Walk to bus stationBranch Avenue Metrorail Station at Bus Bay JID 3417430 yd • 1 min
- 7Wait for bus36Matapeake Business Drive
- 8Ride to bus stationBrandywine Road at Opp. Horseshoe RoadID 3335321 min
- 9Walk toClinton, MD190 yd • 3 min
Alternative route by bus and metro via METRO STATION CLOSURE SHUTTLE, METRORAIL GREEN LINE and 30
To get from Weller Rd & Holdridge Rd to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the METRO STATION CLOSURE SHUTTLE bus from Glenmont station to Fort Totten station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the 30 bus from Suitland Metrorail Station at Bus Bay D station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 2 hr 20 min. The ride fare is $7.00.
Step by Step
- 1Walk to bus stationGlenmont0.54 mi • 12 min
- 2Wait for busMETRO STATION CLOSURE SHUTTLEFort Totten Metro
- 3Ride to bus stationFort Totten39 min
- 4Wait for metroMETRORAIL GREEN LINEBranch Ave
- 5Ride to metro stationSuitland Metro Station34 min
- 6Walk to bus stationSuitland Metrorail Station at Bus Bay DID 3421920 yd • 1 min
- 7Wait for bus30Southern Maryland Hospital
- 8Ride to bus stationPiscataway Road at Brandywine RoadID 3806040 min
- 9Walk toClinton, MD120 yd • 2 min
Public transit directions from Weller Rd & Holdridge Rd to Clinton, MD
Public transit stations close to Weller Rd & Holdridge Rd
Weller Rd & Holdridge Rd is located at Weller Rd & Holdridge Rd, Prince George's County and the nearest public transit station is Weller Rd & Hathaway Dr.
Train stations close to Weller Rd & Holdridge Rd:
- Kensington
- Garrett Park
Bus stations close to Weller Rd & Holdridge Rd:
- Weller Rd & Hathaway Dr
- Weller Rd & Flack St
- Weller Rd & Valleywood Dr
Public transit stations close to Clinton, MD, Prince George's County
Clinton, MD is located at Clinton, MD, Prince George's County and the nearest public transit station is Piscataway Road at Absher Lane.
Bus stations close to Clinton, MD:
- Piscataway Road at Absher Lane
- Woodyard Road at Pineview Lane
- Woodyard Road at Opp. Pine View Lane
Related Routes
- Hyattsville Crossing (Drop-Off) to Clinton, MD
- Ring Rd & Aacc Eb to Clinton, MD
- West St & Church Cir to Clinton, MD
- White Marsh Mall to Clinton, MD
- Mta Light Rail Division to Clinton, MD
- Suitland Metro Station to Clinton, MD
- Us 301 P & R & Smallwood Dr to Clinton, MD
- Burtonsville Park & Ride to Clinton, MD
- Silver Spring Metro Station to Clinton, MD
- Tamar Dr & Cloudleap Ct Sb to Clinton, MD
- College Dr & Ring Rd East Nb FS to Clinton, MD
- Bwi Marshall Marc Station Sb to Clinton, MD
- Gaithersburg Park & Ride to Clinton, MD
- College Park Metro Station to Clinton, MD
- University Of Maryland College Park (Stadium Dr.) to Clinton, MD
- Route 1 @ Dumfries Rd to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Route 1 @ River Heritage Blvd to Clinton, MD
- Omniride Transit Center Departures to Clinton, MD
- Worth Ave @ Prince William Pkwy to Clinton, MD
Alternative route by bus and metro via METRO STATION CLOSURE SHUTTLE, METRORAIL GREEN LINE and 30
To get from Weller Rd & Holdridge Rd to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the METRO STATION CLOSURE SHUTTLE bus from Glenmont station to Fort Totten station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the 30 bus from Suitland Metrorail Station at Bus Bay D station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 2 hr 20 min. The ride fare is $7.00.
Step by Step
- 1Walk to bus stationGlenmont0.54 mi • 12 min
- 2Wait for busMETRO STATION CLOSURE SHUTTLEFort Totten Metro
- 3Ride to bus stationFort Totten39 min
- 4Wait for metroMETRORAIL GREEN LINEBranch Ave
- 5Ride to metro stationSuitland Metro Station34 min
- 6Walk to bus stationSuitland Metrorail Station at Bus Bay DID 3421920 yd • 1 min
- 7Wait for bus30Southern Maryland Hospital
- 8Ride to bus stationPiscataway Road at Brandywine RoadID 3806040 min
- 9Walk toClinton, MD120 yd • 2 min
Questions & Answers
What is the fastest way to get from Weller Rd & Holdridge Rd to Clinton, MD?
The fastest way takes 123 minutes, using Bus line METRO STATION CLOSURE SHUTTLE, Bus line METRORAIL GREEN LINE, Bus line 36.
What is the alternative route to get from Weller Rd & Holdridge Rd to Clinton, MD?
The alternative route takes 140 minutes, using Bus line METRO STATION CLOSURE SHUTTLE, Bus line METRORAIL GREEN LINE, Bus line 30.
Is there a direct bus between Weller Rd & Holdridge Rd and Clinton, MD?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 2 hr 3 min.
Which bus line goes from Weller Rd & Holdridge Rd to Clinton, MD?
The METRO STATION CLOSURE SHUTTLE bus line goes from Glenmont station near Weller Rd & Holdridge Rd in Montgomery County to Fort Totten Metro station. From there you’ll have to take one bus line and one metro line till Fort Totten Metro station near Clinton, MD in Prince George's County.
How long does it take to travel from Weller Rd & Holdridge Rd to Clinton, MD by bus and metro?
The total travel time between Weller Rd & Holdridge Rd in Montgomery County and Clinton, MD in Prince George's County by bus and metro is about 2 hr 3 min.
Where do I get on the bus near Weller Rd & Holdridge Rd to get to Clinton, MD?
Get on the METRO STATION CLOSURE SHUTTLE bus from the Glenmont stop near Weller Rd & Holdridge Rd in Montgomery County.
Where do I get off the bus when travelling between Weller Rd & Holdridge Rd and Clinton, MD?
Get off the bus at the Fort Totten Metro stop, which is closest to Clinton, MD in Prince George's County.
How much is the total bus and metro fare from Weller Rd & Holdridge Rd to Clinton, MD?
The ride from Weller Rd & Holdridge Rd to Clinton, MD costs $7.00.