How to get from Riverside to Danville by bus and train?
From Riverside to Danville by bus and train
To get from Riverside to Danville in Washington, D.C. - Baltimore, MD, you’ll need to take one bus line and 2 train lines: take the ROUTE 3 bus from Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station to Aberdeen Train Station (Pulaski Hwy/Us 40) station. Next, you’ll have to switch to the MARC train and finally take the CRESCENT train from Union Station station to Danville Amtrak Station station. The total trip duration for this route is approximately 10 hr 14 min.
Step by Step
- 1Walk to bus stationPulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)70 yd • 1 min
- 2Wait for busROUTE 3Eastbound
- 3Ride to bus stationAberdeen Train Station (Pulaski Hwy/Us 40)27 min
- 4Walk to train stationAberdeen, Md40 yd • 1 min
- 5Wait for trainMARCWashington
- 6Ride to train stationUnion Station95 min
- 7Wait for trainCRESCENTNew Orleans
- 8Ride to train stationDanville Amtrak Station292 min
- 9Walk toDanville0.73 mi • 15 min
Alternative route from Riverside to Danville by bus and train via ROUTE 3, NORTHEAST REGIONAL and CRESCENT
To get from Riverside to Danville in Washington, D.C. - Baltimore, MD, you’ll need to take one bus line and 2 train lines: take the ROUTE 3 bus from Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station to Aberdeen Train Station (Pulaski Hwy/Us 40) station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the CRESCENT train from Union Station station to Danville Amtrak Station station. The total trip duration for this route is approximately 11 hr 14 min.
Step by Step
- 1Walk to bus stationPulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)70 yd • 1 min
- 2Wait for busROUTE 3Eastbound
- 3Ride to bus stationAberdeen Train Station (Pulaski Hwy/Us 40)27 min
- 4Walk to train stationAberdeen, Md40 yd • 1 min
- 5Wait for trainNORTHEAST REGIONALWashington
- 6Ride to train stationUnion Station72 min
- 7Wait for trainCRESCENTNew Orleans
- 8Ride to train stationDanville Amtrak Station292 min
- 9Walk toDanville0.73 mi • 15 min
Public transit directions from Riverside to Danville
Public transit stations close to Riverside
Riverside is located at Riverside, Washington, D.C. - Baltimore, MD and the nearest public transit station is Us 40 & Bata Blvd Wb.
Bus stations close to Riverside:
- Us 40 & Bata Blvd Wb
- Pulaski Hwy/Us 40 (Wb) & Bata Blvd (At Intersection)
- Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)
Public transit stations close to Danville, Washington, D.C. - Baltimore, MD
Danville is located at Danville, Washington, D.C. - Baltimore, MD and the nearest public transit station is N Ridge Paths.
Train stations close to Danville:
- Danville Amtrak Station
Bus stations close to Danville:
- N Ridge Paths
- Patton St Biscuitville
- Spring St Behind Danville House
Related Routes
- North East to Danville
- Haymarket to Danville
- Queenstown to Danville
- Lexington Park to Danville
- West Ocean City to Danville
- Cambridge to Danville
- Cumberland to Danville
- Frostburg to Danville
- Emmitsburg to Danville
- Elkton to Danville
- Culpeper to Danville
- Orange to Danville
- Norfolk to Danville
- Stafford County to Danville
- Colonial Heights to Danville
- Garrett County to Danville
- Prince George's County to Danville
- Goochland County to Danville
- Rockingham County to Danville
- Culpeper County to Danville
Alternative route from Riverside to Danville by bus and train via ROUTE 3, NORTHEAST REGIONAL and CRESCENT
To get from Riverside to Danville in Washington, D.C. - Baltimore, MD, you’ll need to take one bus line and 2 train lines: take the ROUTE 3 bus from Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station to Aberdeen Train Station (Pulaski Hwy/Us 40) station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the CRESCENT train from Union Station station to Danville Amtrak Station station. The total trip duration for this route is approximately 11 hr 14 min.
Step by Step
- 1Walk to bus stationPulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)70 yd • 1 min
- 2Wait for busROUTE 3Eastbound
- 3Ride to bus stationAberdeen Train Station (Pulaski Hwy/Us 40)27 min
- 4Walk to train stationAberdeen, Md40 yd • 1 min
- 5Wait for trainNORTHEAST REGIONALWashington
- 6Ride to train stationUnion Station72 min
- 7Wait for trainCRESCENTNew Orleans
- 8Ride to train stationDanville Amtrak Station292 min
- 9Walk toDanville0.73 mi • 15 min
Questions & Answers
What is the fastest way to get from Riverside to Danville?
The fastest way takes 614 minutes, using Bus line ROUTE 3, Bus line MARC, Bus line CRESCENT.
What is the alternative route to get from Riverside to Danville?
The alternative route takes 674 minutes, using Bus line ROUTE 3, Bus line NORTHEAST REGIONAL, Bus line CRESCENT.
Is there a direct bus between Riverside and Danville in Washington, D.C. - Baltimore, MD?
No, you’ll have to take one bus line and 2 train lines in total. The total travelling time is 10 hr 14 min.
Which bus line goes from Riverside to Danville in Washington, D.C. - Baltimore, MD?
The ROUTE 3 bus line goes from Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station near Riverside to Eastbound station. From there you’ll have to take 2 train lines till Eastbound station near Danville in Washington, D.C. - Baltimore, MD
How long does it take to travel from Riverside to Danville in Washington, D.C. - Baltimore, MD by bus and train?
The total travel time between Riverside and Danville in Washington, D.C. - Baltimore, MD by bus and train is about 10 hr 14 min.
Where do I get on the bus near Riverside to get to Danville in Washington, D.C. - Baltimore, MD?
Get on the ROUTE 3 bus from the Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) stop near Riverside in Washington, D.C. - Baltimore, MD.
Where do I get off the bus when travelling between Riverside and Danville in Washington, D.C. - Baltimore, MD?
Get off the bus at the Eastbound station, which is closest to Danville in Washington, D.C. - Baltimore, MD.