How to get from Ridge Rd Se+Anacostia Rd SE to District Heights MD by bus and metro?

From Ridge Rd Se+Anacostia Rd SE to District Heights MD by bus and metro

To get from Ridge Rd Se+Anacostia Rd SE to District Heights MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the U6 bus from Ridge Rd Se+Anacostia Rd SE station to E Capitol St Se+46 St SE station. Next, you’ll have to switch to the METRORAIL BLUE LINE metro and finally take the 24 bus from Capitol Heights Station + Bus Bay B station to Brooks Dr & Md-4 station. The total trip duration for this route is approximately 40 min. The ride fare is $5.25.

40min$5.25
Walk to bus station
Bus - U6U6
Metro - METRORAIL BLUE LINE
Bus - 2424
Walk to District Heights MD
Leaves from Ridge Rd Se+Anacostia Rd SE

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Ridge Rd Se+Anacostia Rd SE
    ID 1003305
    10 yd • 1 min
  • 2
    Bus - U6U6
    Wait for bus
    U6
    East To Lincoln Heights
  • 3
    Ride to bus station
    Ride to bus station
    E Capitol St Se+46 St SE
    ID 1000769
    10 min
  • 4
    Walk to metro station
    Walk to metro station
    Benning Rd Metro Station
    160 yd • 2 min
  • 5
    Metro - METRORAIL BLUE LINE
    Wait for metro
    METRORAIL BLUE LINE
    Largo
  • 6
    Ride to metro station
    Ride to metro station
    Capitol Heights Metro Station
    3 min
  • 7
    Walk to bus station
    Walk to bus station
    Capitol Heights Station + Bus Bay B
    110 yd • 2 min
  • 8
    Bus - 2424
    Wait for bus
    24
    Morgan Blvd Metrorail Station
  • 9
    Ride to bus station
    Ride to bus station
    Brooks Dr & Md-4
    ID 3003368
    13 min
  • 10
    Walk to District Heights MD
    Walk to
    District Heights MD
    240 yd • 3 min
*Duration based on 8am traffic

From Ridge Rd Se+Anacostia Rd SE to District Heights MD by bus

To get from Ridge Rd Se+Anacostia Rd SE to District Heights MD in Prince George's County, take the V4 bus from Minnesota Av Se+Ridge Rd SE station to Capitol Heights+Bay D station. Next, take the 24 bus from Capitol Heights Station + Bus Bay B station to Brooks Dr & Md-4 station. The total trip duration for this route is approximately 49 min. The ride fare is $3.00.

49min$3.00
Walk to bus station
Bus - V4V4
Bus - 2424
Walk to District Heights MD
Leaves from Minnesota Av Se+Ridge Rd SE

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Minnesota Av Se+Ridge Rd SE
    ID 1000763
    210 yd • 3 min
  • 2
    Bus - V4V4
    Wait for bus
    V4
    East To Capitol Heights
  • 3
    Ride to bus station
    Ride to bus station
    Capitol Heights+Bay D
    ID 3002719
    24 min
  • 4
    Walk to bus station
    Walk to bus station
    Capitol Heights Station + Bus Bay B
    40 yd • 1 min
  • 5
    Bus - 2424
    Wait for bus
    24
    Morgan Blvd Metrorail Station
  • 6
    Ride to bus station
    Ride to bus station
    Brooks Dr & Md-4
    ID 3003368
    13 min
  • 7
    Walk to District Heights MD
    Walk to
    District Heights MD
    240 yd • 3 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Ridge Rd Se+Anacostia Rd SE to District Heights MD

The distance between Ridge Rd Se+Anacostia Rd SE, Prince George's County and District Heights MD, Prince George's County is approximately 7.38 mi, which can typically be travelled in 40 min. Moovit will show you the directions from Ridge Rd Se+Anacostia Rd SE to District Heights MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.

Public transit stations close to Ridge Rd Se+Anacostia Rd SE

Ridge Rd Se+Anacostia Rd SE is located at Ridge Rd Se+Anacostia Rd SE, Prince George's County and the nearest public transit station is Ridge Rd Se+Anacostia Rd SE.

Metro stations close to Ridge Rd Se+Anacostia Rd SE:

  • Minnesota Ave
  • Stadium-Armory
  • Benning Rd Metro Station

Bus stations close to Ridge Rd Se+Anacostia Rd SE:

  • Ridge Rd Se+Anacostia Rd SE
  • Ridge Rd Se+37 St SE
  • 37 St Se+Ridge Rd SE

Public transit stations close to District Heights MD, Prince George's County

District Heights MD is located at District Heights MD, Prince George's County and the nearest public transit station is Marlboro Pk+Brooks Dr.

Metro stations close to District Heights MD:

  • Capitol Heights Metro Station
  • Suitland Metro Station
  • Naylor Road

Bus stations close to District Heights MD:

  • Marlboro Pk+Brooks Dr
  • Brooks Drive at Ridley Street
  • Brooks Drive at Marlboro Pike

Related Routes

From Ridge Rd Se+Anacostia Rd SE to District Heights MD by bus

To get from Ridge Rd Se+Anacostia Rd SE to District Heights MD in Prince George's County, take the V4 bus from Minnesota Av Se+Ridge Rd SE station to Capitol Heights+Bay D station. Next, take the 24 bus from Capitol Heights Station + Bus Bay B station to Brooks Dr & Md-4 station. The total trip duration for this route is approximately 49 min. The ride fare is $3.00.

49min$3.00
Walk to bus station
Bus - V4V4
Bus - 2424
Walk to District Heights MD
Leaves from Minnesota Av Se+Ridge Rd SE

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Minnesota Av Se+Ridge Rd SE
    ID 1000763
    210 yd • 3 min
  • 2
    Bus - V4V4
    Wait for bus
    V4
    East To Capitol Heights
  • 3
    Ride to bus station
    Ride to bus station
    Capitol Heights+Bay D
    ID 3002719
    24 min
  • 4
    Walk to bus station
    Walk to bus station
    Capitol Heights Station + Bus Bay B
    40 yd • 1 min
  • 5
    Bus - 2424
    Wait for bus
    24
    Morgan Blvd Metrorail Station
  • 6
    Ride to bus station
    Ride to bus station
    Brooks Dr & Md-4
    ID 3003368
    13 min
  • 7
    Walk to District Heights MD
    Walk to
    District Heights MD
    240 yd • 3 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Ridge Rd Se+Anacostia Rd SE to District Heights MD?

    The fastest way takes 40 minutes, using Bus line U6, Bus line METRORAIL BLUE LINE, Bus line 24.

  • What is the alternative route to get from Ridge Rd Se+Anacostia Rd SE to District Heights MD?

    The alternative route takes 49 minutes, using Bus line V4, Bus line 24.

  • Is there a direct bus between Ridge Rd Se+Anacostia Rd SE and District Heights MD?

    No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 40 min.

  • Which bus line goes from Ridge Rd Se+Anacostia Rd SE to District Heights MD?

    The U6 bus line goes from Ridge Rd Se+Anacostia Rd SE station near Ridge Rd Se+Anacostia Rd SE in Washington to East To Lincoln Heights station. From there you’ll have to take one bus line and one metro line till East To Lincoln Heights station near District Heights MD in Prince George's County.

  • How long does it take to travel from Ridge Rd Se+Anacostia Rd SE to District Heights MD by bus and metro?

    The total travel time between Ridge Rd Se+Anacostia Rd SE in Washington and District Heights MD in Prince George's County by bus and metro is about 40 min.

  • Where do I get on the bus near Ridge Rd Se+Anacostia Rd SE to get to District Heights MD?

    Get on the U6 bus from the Ridge Rd Se+Anacostia Rd SE stop near Ridge Rd Se+Anacostia Rd SE in Washington.

  • Where do I get off the bus when travelling between Ridge Rd Se+Anacostia Rd SE and District Heights MD?

    Get off the bus at the East To Lincoln Heights stop, which is closest to District Heights MD in Prince George's County.

  • How much is the total bus and metro fare from Ridge Rd Se+Anacostia Rd SE to District Heights MD?

    The ride from Ridge Rd Se+Anacostia Rd SE to District Heights MD costs $5.25.

Real-Time Arrivals, Schedules, Maps & More