How to get from Bowling Green to George Mason by bus and train?

From Bowling Green to George Mason by bus and train

To get from Bowling Green to George Mason in Washington, D.C. - Baltimore, MD, you’ll need to take 3 bus lines and 2 train lines: take the GREEN bus from Mcmullen Hwy & Milnor Ave station to Rose's station. Next, you’ll have to switch to the RED bus, then the CAPITOL LIMITED train, then the MANASSAS LINE train and finally take the 29K bus from King St-Old Town Station + Bus Bay B station to University Dr + George Mason Blvd station. The total trip duration for this route is approximately 6 hr 22 min.

382min
Bus - GREENGREEN
Bus - REDRED
Train - CAPITOL LIMITEDCAPITOL LIMITED
Train - MANASSAS LINEMANASSAS LINE
Bus - 29K29K
Leaves from Mcmullen Hwy & Milnor Ave
Step by Step
  • 1
    Start from bus station
    Start from bus station
    Bowling Green
  • 2
    Bus - GREENGREEN
    Wait for bus
    GREEN
    Lavale / Cresaptown Loop
  • 3
    Ride to bus station
    Ride to bus station
    Rose's
    15 min
  • 4
    Bus - REDRED
    Wait for bus
    RED
    Willowbrook Rd Loop
  • 5
    Ride to bus station
    Ride to bus station
    Cumberland Post Office
    2 min
  • 6
    Walk to train station
    Walk to train station
    Cumberland Amtrak Station
    150 yd • 2 min
  • 7
    Train - CAPITOL LIMITEDCAPITOL LIMITED
    Wait for train
    CAPITOL LIMITED
    Washington Union Station
  • 8
    Ride to train station
    Ride to train station
    Union Station
    213 min
  • 9
    Train - MANASSAS LINEMANASSAS LINE
    Wait for train
    MANASSAS LINE
    325 Broad Run
  • 10
    Ride to train station
    Ride to train station
    Alexandria
    23 min
  • 11
    Walk to bus station
    Walk to bus station
    King St-Old Town Station + Bus Bay B
    ID 4001119
    710 yd • 9 min
  • 12
    Bus - 29K29K
    Wait for bus
    29K
    West To George Mason University
  • 13
    Ride to bus station University Dr + George Mason Blvd
    Ride to bus station
    University Dr + George Mason Blvd
    ID 5000823
    63 min
*Duration based on 8am traffic

Alternative route from Bowling Green to George Mason by bus and train via GREEN, BLUE, CAPITOL LIMITED, MANASSAS LINE and 29K

To get from Bowling Green to George Mason in Washington, D.C. - Baltimore, MD, you’ll need to take 3 bus lines and 2 train lines: take the GREEN bus from Mcmullen Hwy & Milnor Ave station to Rose's station. Next, you’ll have to switch to the BLUE bus, then the CAPITOL LIMITED train, then the MANASSAS LINE train and finally take the 29K bus from King St-Old Town Station + Bus Bay B station to University Dr + George Mason Blvd station. The total trip duration for this route is approximately 6 hr 22 min.

382min
Bus - GREENGREEN
Bus - BLUEBLUE
Train - CAPITOL LIMITEDCAPITOL LIMITED
Train - MANASSAS LINEMANASSAS LINE
Bus - 29K29K
Leaves from Mcmullen Hwy & Milnor Ave
Step by Step
  • 1
    Start from bus station
    Start from bus station
    Bowling Green
  • 2
    Bus - GREENGREEN
    Wait for bus
    GREEN
    Lavale / Cresaptown Loop
  • 3
    Ride to bus station
    Ride to bus station
    Rose's
    15 min
  • 4
    Bus - BLUEBLUE
    Wait for bus
    BLUE
    White Oaks Loop
  • 5
    Ride to bus station
    Ride to bus station
    Cumberland Post Office
    2 min
  • 6
    Walk to train station
    Walk to train station
    Cumberland Amtrak Station
    150 yd • 2 min
  • 7
    Train - CAPITOL LIMITEDCAPITOL LIMITED
    Wait for train
    CAPITOL LIMITED
    Washington Union Station
  • 8
    Ride to train station
    Ride to train station
    Union Station
    213 min
  • 9
    Train - MANASSAS LINEMANASSAS LINE
    Wait for train
    MANASSAS LINE
    325 Broad Run
  • 10
    Ride to train station
    Ride to train station
    Alexandria
    23 min
  • 11
    Walk to bus station
    Walk to bus station
    King St-Old Town Station + Bus Bay B
    ID 4001119
    710 yd • 9 min
  • 12
    Bus - 29K29K
    Wait for bus
    29K
    West To George Mason University
  • 13
    Ride to bus station University Dr + George Mason Blvd
    Ride to bus station
    University Dr + George Mason Blvd
    ID 5000823
    63 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
Public transit directions from Bowling Green to George Mason
The distance between Bowling Green, Washington, D.C. - Baltimore, MD and George Mason, Washington, D.C. - Baltimore, MD is approximately 164.3 mi, which can typically be travelled in 382 min. Moovit will show you the directions from Bowling Green to George Mason by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.
Public transit stations close to Bowling Green

Bowling Green is located at Bowling Green, Washington, D.C. - Baltimore, MD and the nearest public transit station is Goodwill Industries.

Bus stations close to Bowling Green:

  • Goodwill Industries
  • Bowling Greene Fire Department
Public transit stations close to George Mason, Washington, D.C. - Baltimore, MD

George Mason is located at George Mason, Washington, D.C. - Baltimore, MD and the nearest public transit station is University Dr + George Mason Blvd.

Metro stations close to George Mason:

  • Vienna Metro Station

Train stations close to George Mason:

  • Burke Centre

Bus stations close to George Mason:

  • University Dr + George Mason Blvd
  • University Dr And George Mason Blvd
  • University Dr at Occoquan
Related Routes

Alternative route from Bowling Green to George Mason by bus and train via GREEN, BLUE, CAPITOL LIMITED, MANASSAS LINE and 29K

To get from Bowling Green to George Mason in Washington, D.C. - Baltimore, MD, you’ll need to take 3 bus lines and 2 train lines: take the GREEN bus from Mcmullen Hwy & Milnor Ave station to Rose's station. Next, you’ll have to switch to the BLUE bus, then the CAPITOL LIMITED train, then the MANASSAS LINE train and finally take the 29K bus from King St-Old Town Station + Bus Bay B station to University Dr + George Mason Blvd station. The total trip duration for this route is approximately 6 hr 22 min.

382min
Bus - GREENGREEN
Bus - BLUEBLUE
Train - CAPITOL LIMITEDCAPITOL LIMITED
Train - MANASSAS LINEMANASSAS LINE
Bus - 29K29K
Leaves from Mcmullen Hwy & Milnor Ave
Step by Step
  • 1
    Start from bus station
    Start from bus station
    Bowling Green
  • 2
    Bus - GREENGREEN
    Wait for bus
    GREEN
    Lavale / Cresaptown Loop
  • 3
    Ride to bus station
    Ride to bus station
    Rose's
    15 min
  • 4
    Bus - BLUEBLUE
    Wait for bus
    BLUE
    White Oaks Loop
  • 5
    Ride to bus station
    Ride to bus station
    Cumberland Post Office
    2 min
  • 6
    Walk to train station
    Walk to train station
    Cumberland Amtrak Station
    150 yd • 2 min
  • 7
    Train - CAPITOL LIMITEDCAPITOL LIMITED
    Wait for train
    CAPITOL LIMITED
    Washington Union Station
  • 8
    Ride to train station
    Ride to train station
    Union Station
    213 min
  • 9
    Train - MANASSAS LINEMANASSAS LINE
    Wait for train
    MANASSAS LINE
    325 Broad Run
  • 10
    Ride to train station
    Ride to train station
    Alexandria
    23 min
  • 11
    Walk to bus station
    Walk to bus station
    King St-Old Town Station + Bus Bay B
    ID 4001119
    710 yd • 9 min
  • 12
    Bus - 29K29K
    Wait for bus
    29K
    West To George Mason University
  • 13
    Ride to bus station University Dr + George Mason Blvd
    Ride to bus station
    University Dr + George Mason Blvd
    ID 5000823
    63 min
*Duration based on 8am traffic
Questions & Answers

  • What is the fastest way to get from Bowling Green to George Mason?

    The fastest way takes 382 minutes, using Bus line GREEN, Bus line RED, Bus line CAPITOL LIMITED, Bus line MANASSAS LINE, Bus line 29K.

  • What is the alternative route to get from Bowling Green to George Mason?

    The alternative route takes 382 minutes, using Bus line GREEN, Bus line BLUE, Bus line CAPITOL LIMITED, Bus line MANASSAS LINE, Bus line 29K.

  • Is there a direct bus between Bowling Green and George Mason in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 3 bus lines and 2 train lines in total. The total travelling time is 6 hr 22 min.

  • Which bus line goes from Bowling Green to George Mason in Washington, D.C. - Baltimore, MD?

    The GREEN bus line goes from Lavale / Cresaptown Loop station near Bowling Green to Rose's station. From there you’ll have to take one bus line and 2 train lines till Rose's station near George Mason in Washington, D.C. - Baltimore, MD

  • How long does it take to travel from Bowling Green to George Mason in Washington, D.C. - Baltimore, MD by bus and train?

    The total travel time between Bowling Green and George Mason in Washington, D.C. - Baltimore, MD by bus and train is about 6 hr 22 min.

  • Where do I get on the bus near Bowling Green to get to George Mason in Washington, D.C. - Baltimore, MD?

    Get on the GREEN bus from the Lavale / Cresaptown Loop stop near Bowling Green in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when travelling between Bowling Green and George Mason in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Rose's stop, which is closest to George Mason in Washington, D.C. - Baltimore, MD.

Real-Time Arrivals, Schedules, Maps & More