How to get from Riverside to Henry County by bus and train?
By bus and train
To get from Riverside to Henry County in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the 420 bus from Us 40 & Bata Blvd Wb station to Howard St & Pratt St Ns (Convention Center) station. Next, you’ll have to switch to the MARC train and finally take the VIRGINIA BREEZE bus from Union Station station to The Village at Martinsville station. The total trip duration for this route is approximately 12 hr 42 min.
Step by Step
- 1Start from bus stationRiverside
- 2Wait for bus420420/4 Johns Hopkins
- 3Ride to bus stationHoward St & Pratt St Ns (Convention Center)ID 1366454 min
- 4Walk to train stationCamden Station300 yd • 4 min
- 5Wait for trainMARCWashington
- 6Ride to train stationUnion Station67 min
- 7Wait for busVIRGINIA BREEZEThe Village at Martinsville
- 8Ride to bus stationThe Village at Martinsville370 min
- 9Walk toHenry County1.4 mi • 29 min
Alternative route by bus and train via ROUTE 3, NORTHEAST REGIONAL and VIRGINIA BREEZE
To get from Riverside to Henry County in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 3 bus from Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station to Aberdeen Train Station (Pulaski Hwy/Us 40) station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the VIRGINIA BREEZE bus from Union Station station to The Village at Martinsville station. The total trip duration for this route is approximately 13 hr 51 min.
Step by Step
- 1Walk to bus stationPulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)70 yd • 1 min
- 2Wait for busROUTE 3Eastbound
- 3Ride to bus stationAberdeen Train Station (Pulaski Hwy/Us 40)25 min
- 4Walk to train stationAberdeen, Md40 yd • 1 min
- 5Wait for trainNORTHEAST REGIONALWashington
- 6Ride to train stationUnion Station73 min
- 7Wait for busVIRGINIA BREEZEThe Village at Martinsville
- 8Ride to bus stationThe Village at Martinsville370 min
- 9Walk toHenry County1.4 mi • 29 min
Public transit directions from Riverside to Henry County
Public transit stations close to Riverside
Riverside is located at Riverside, Washington, D.C. - Baltimore, MD and the nearest public transit station is Us 40 & Bata Blvd Wb.
Bus stations close to Riverside:
- Us 40 & Bata Blvd Wb
- Pulaski Hwy/Us 40 (Wb) & Bata Blvd (At Intersection)
- Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)
Public transit stations close to Henry County, Washington, D.C. - Baltimore, MD
Henry County is located at Henry County, Washington, D.C. - Baltimore, MD and the nearest public transit station is Walmart.
Bus stations close to Henry County:
- Walmart
- Pcs-Recovery Center
Related Routes
- North East to Henry County
- Haymarket to Henry County
- Queenstown to Henry County
- Salisbury to Henry County
- Lexington Park to Henry County
- West Ocean City to Henry County
- Cambridge to Henry County
- Cumberland to Henry County
- Danville to Henry County
- Emmitsburg to Henry County
- Elkton to Henry County
- Culpeper to Henry County
- Norfolk to Henry County
- Stafford County to Henry County
- Colonial Heights to Henry County
- Prince George's County to Henry County
- Goochland County to Henry County
- Culpeper County to Henry County
- Cecil County to Henry County
- Dorchester County to Henry County
Alternative route by bus and train via ROUTE 3, NORTHEAST REGIONAL and VIRGINIA BREEZE
To get from Riverside to Henry County in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 3 bus from Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station to Aberdeen Train Station (Pulaski Hwy/Us 40) station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the VIRGINIA BREEZE bus from Union Station station to The Village at Martinsville station. The total trip duration for this route is approximately 13 hr 51 min.
Step by Step
- 1Walk to bus stationPulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)70 yd • 1 min
- 2Wait for busROUTE 3Eastbound
- 3Ride to bus stationAberdeen Train Station (Pulaski Hwy/Us 40)25 min
- 4Walk to train stationAberdeen, Md40 yd • 1 min
- 5Wait for trainNORTHEAST REGIONALWashington
- 6Ride to train stationUnion Station73 min
- 7Wait for busVIRGINIA BREEZEThe Village at Martinsville
- 8Ride to bus stationThe Village at Martinsville370 min
- 9Walk toHenry County1.4 mi • 29 min
Questions & Answers
What is the fastest way to get from Riverside to Henry County?
The fastest way takes 762 minutes, using Bus line 420, Bus line MARC, Bus line VIRGINIA BREEZE.
What is the alternative route to get from Riverside to Henry County?
The alternative route takes 831 minutes, using Bus line ROUTE 3, Bus line NORTHEAST REGIONAL, Bus line VIRGINIA BREEZE.
Is there a direct bus between Riverside and Henry County in Washington, D.C. - Baltimore, MD?
No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 12 hr 42 min.
Which bus line goes from Riverside to Henry County in Washington, D.C. - Baltimore, MD?
The 420 bus line goes from 420/4 Johns Hopkins station near Riverside to Howard St & Pratt St Ns (Convention Center) station. From there you’ll have to take one bus line and one train line till Howard St & Pratt St Ns (Convention Center) station near Henry County in Washington, D.C. - Baltimore, MD
How long does it take to travel from Riverside to Henry County in Washington, D.C. - Baltimore, MD by bus and train?
The total travel time between Riverside and Henry County in Washington, D.C. - Baltimore, MD by bus and train is about 12 hr 42 min.
Where do I get on the bus near Riverside to get to Henry County in Washington, D.C. - Baltimore, MD?
Get on the 420 bus from the 420/4 Johns Hopkins stop near Riverside in Washington, D.C. - Baltimore, MD.
Where do I get off the bus when travelling between Riverside and Henry County in Washington, D.C. - Baltimore, MD?
Get off the bus at the Howard St & Pratt St Ns (Convention Center) stop, which is closest to Henry County in Washington, D.C. - Baltimore, MD.