The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from E Light Dr & Stateside Rd to Hillcrest Heights, MD by bus and metro?
By bus and metro
To get from E Light Dr & Stateside Rd to Hillcrest Heights, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the K6 bus from New Hampshire Av+Dilston Rd station to Ft Totten+Bus Bay A station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the P12 bus from Southern Av Station+Bus Bay E station to Iverson St+23 Pw station. The total trip duration for this route is approximately 1 hr 30 min. The ride fare is $8.50.
90min$8.50
K6
P12Leaves from New Hampshire Av+Dilston Rd
Step by Step
- 1Walk to bus stationNew Hampshire Av+Dilston RdID 2000305690 yd • 8 min
- 2K6Wait for busK6South To Fort Totten
- 3
Ride to bus stationFt Totten+Bus Bay AID 100343427 min - 4Walk to metro stationFort Totten80 yd • 1 min
- 5Wait for metroMETRORAIL GREEN LINEBranch Ave
- 6Ride to metro stationSouthern Ave Metro Station28 min
- 7Walk to bus stationSouthern Av Station+Bus Bay EID 300421140 yd • 1 min
- 8P12Wait for busP12East To Addison Rd Station
- 9Ride to bus stationIverson St+23 PwID 300057911 min
*Duration based on 8am traffic
Alternative route by bus and metro via R1, METRORAIL GREEN LINE and H12
To get from E Light Dr & Stateside Rd to Hillcrest Heights, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the R1 bus from New Hampshire Avenue And Adelphi Road station to Ft Totten+Bus Bay D station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the H12 bus from Naylor Rd Station station to Iverson St+23 Pw station. The total trip duration for this route is approximately 1 hr 26 min. The ride fare is $8.70.
86min$8.70
R1H12Leaves from New Hampshire Avenue And Adelphi Road
Step by Step
- 1Walk to bus stationNew Hampshire Avenue And Adelphi Road730 yd • 9 min
- 2R1Wait for busR1South To Fort Totten
- 3Ride to bus stationFt Totten+Bus Bay DID 100323723 min
- 4Walk to metro stationFort Totten60 yd • 1 min
- 5Wait for metroMETRORAIL GREEN LINEBranch Ave
- 6Ride to metro stationNaylor Road31 min
- 7Walk to bus stationNaylor Rd Station50 yd • 1 min
- 8H12Wait for busH12South To Temple Hills
- 9Ride to bus stationIverson St+23 PwID 30005858 min
- 10Walk toHillcrest Heights, MD120 yd • 2 min
*Duration based on 8am traffic
Public transit directions from E Light Dr & Stateside Rd to Hillcrest Heights, MD
The distance between E Light Dr & Stateside Rd, Prince George's County and Hillcrest Heights, MD, Prince George's County is approximately 20.08 mi, which can typically be travelled in 90 min. Moovit will show you the directions from E Light Dr & Stateside Rd to Hillcrest Heights, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Public transit stations close to E Light Dr & Stateside Rd
E Light Dr & Stateside Rd is located at E Light Dr & Stateside Rd, Prince George's County and the nearest public transit station is Oakview Dr & Cottrell Terr.
Bus stations close to E Light Dr & Stateside Rd:
- Oakview Dr & Cottrell Terr
- E Light Dr & Oakview Dr
- Avenel Rd & Stateside Dr
Public transit stations close to Hillcrest Heights, MD, Prince George's County
Hillcrest Heights, MD is located at Hillcrest Heights, MD, Prince George's County and the nearest public transit station is 23 Pw+Kirby Dr.
Metro stations close to Hillcrest Heights, MD:
- Southern Ave Metro Station
- Naylor Road
- Congress Heights Metro Station
Bus stations close to Hillcrest Heights, MD:
- 23 Pw+Kirby Dr
- Iverson St+24 Av
- 23 Pw+Kenton Pl
Related Routes
- Holabird & Searles FS Wb to Hillcrest Heights, MD
- Lutherville Station to Hillcrest Heights, MD
- Hyattsville Crossing (Drop-Off) to Hillcrest Heights, MD
- Bus Stop at Timonium Fairgrounds Light Rail Station Sb to Hillcrest Heights, MD
- 301 Hospital Dr Eb to Hillcrest Heights, MD
- Baltimore Annapolis Blvd & Marbury Rd Sb to Hillcrest Heights, MD
- Ring Rd & Aacc Eb to Hillcrest Heights, MD
- West St & Church Cir to Hillcrest Heights, MD
- Ritchie Hwy & Mva Nb to Hillcrest Heights, MD
- Security Square Mall to Hillcrest Heights, MD
- Belair Rd & Overlea Ave Nb to Hillcrest Heights, MD
- White Marsh Mall to Hillcrest Heights, MD
- Northern Pkwy & York Rd Eb to Hillcrest Heights, MD
- Northern Pkwy & Mcclean Blvd FS Eb to Hillcrest Heights, MD
- Craigmont Rd & Westview Mall Opp Wb to Hillcrest Heights, MD
- Back River Neck Rd & Lanflair Rd Sb to Hillcrest Heights, MD
- Bayner Rd & Sandalwood Rd to Hillcrest Heights, MD
- Middle River Rd & Pawnee Rd FS Nb to Hillcrest Heights, MD
- Philadelphia Rd & Fontana Ln to Hillcrest Heights, MD
- Golden Ring Rd & Delegge Rd FS Wb to Hillcrest Heights, MD
Alternative route by bus and metro via R1, METRORAIL GREEN LINE and H12
To get from E Light Dr & Stateside Rd to Hillcrest Heights, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the R1 bus from New Hampshire Avenue And Adelphi Road station to Ft Totten+Bus Bay D station. Next, you’ll have to switch to the METRORAIL GREEN LINE metro and finally take the H12 bus from Naylor Rd Station station to Iverson St+23 Pw station. The total trip duration for this route is approximately 1 hr 26 min. The ride fare is $8.70.
86min$8.70
R1H12Leaves from New Hampshire Avenue And Adelphi Road
Step by Step
- 1Walk to bus stationNew Hampshire Avenue And Adelphi Road730 yd • 9 min
- 2R1Wait for busR1South To Fort Totten
- 3Ride to bus stationFt Totten+Bus Bay DID 100323723 min
- 4Walk to metro stationFort Totten60 yd • 1 min
- 5Wait for metroMETRORAIL GREEN LINEBranch Ave
- 6Ride to metro stationNaylor Road31 min
- 7Walk to bus stationNaylor Rd Station50 yd • 1 min
- 8H12Wait for busH12South To Temple Hills
- 9Ride to bus stationIverson St+23 PwID 30005858 min
- 10Walk toHillcrest Heights, MD120 yd • 2 min
*Duration based on 8am traffic
Questions & Answers
What is the fastest way to get from E Light Dr & Stateside Rd to Hillcrest Heights, MD?
The fastest way takes 90 minutes, using Bus line K6, Bus line METRORAIL GREEN LINE, Bus line P12.
What is the alternative route to get from E Light Dr & Stateside Rd to Hillcrest Heights, MD?
The alternative route takes 86 minutes, using Bus line R1, Bus line METRORAIL GREEN LINE, Bus line H12.
Is there a direct bus between E Light Dr & Stateside Rd and Hillcrest Heights, MD?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 1 hr 30 min.
Which bus line goes from E Light Dr & Stateside Rd to Hillcrest Heights, MD?
The K6 bus line goes from New Hampshire Av+Dilston Rd station near E Light Dr & Stateside Rd in Montgomery County to South To Fort Totten station. From there you’ll have to take one bus line and one metro line till South To Fort Totten station near Hillcrest Heights, MD in Prince George's County.
How long does it take to travel from E Light Dr & Stateside Rd to Hillcrest Heights, MD by bus and metro?
The total travel time between E Light Dr & Stateside Rd in Montgomery County and Hillcrest Heights, MD in Prince George's County by bus and metro is about 1 hr 30 min.
Where do I get on the bus near E Light Dr & Stateside Rd to get to Hillcrest Heights, MD?
Get on the K6 bus from the New Hampshire Av+Dilston Rd stop near E Light Dr & Stateside Rd in Montgomery County.
Where do I get off the bus when travelling between E Light Dr & Stateside Rd and Hillcrest Heights, MD?
Get off the bus at the South To Fort Totten stop, which is closest to Hillcrest Heights, MD in Prince George's County.
How much is the total bus and metro fare from E Light Dr & Stateside Rd to Hillcrest Heights, MD?
The ride from E Light Dr & Stateside Rd to Hillcrest Heights, MD costs $8.50.
