How to get from Washington Junction to Millvale by bus and light rail?
From Washington Junction to Millvale by bus and light rail
To get from Washington Junction to Millvale in Millvale, take the SLVR light rail from Washington Junction station to Wood Street station. Next, take the 1 bus from Liberty Ave + 7th St (Clark Bldg) station to East Ohio St + Grant station. The total trip duration for this route is approximately 58 min. The ride fare is $5.50.
Step by Step
- 1Start from light rail stationWashington Junction
- 2Wait for light railSLVRInbound-North Shore
- 3Ride to light rail stationWood Street27 min
- 4Walk to bus stationLiberty Ave + 7th St (Clark Bldg)ID 18030 yd • 1 min
- 5Wait for bus1Outbound-Tarentum
- 6Ride to bus stationEast Ohio St + GrantID 2067414 min
- 7Walk toMillvaleHoward Street0.55 mi • 12 min
Alternative route from Washington Junction to Millvale by bus and light rail via BLUE and 1
To get from Washington Junction to Millvale in Millvale, take the BLUE light rail from Washington Junction station to Wood Street station. Next, take the 1 bus from Liberty Ave + 7th St (Clark Bldg) station to East Ohio St + Grant station. The total trip duration for this route is approximately 1 hr 8 min. The ride fare is $5.50.
Step by Step
- 1Start from light rail stationWashington Junction
- 2Wait for light railBLUEInbound-North Shore
- 3Ride to light rail stationWood Street27 min
- 4Walk to bus stationLiberty Ave + 7th St (Clark Bldg)ID 18030 yd • 1 min
- 5Wait for bus1Outbound-Tarentum
- 6Ride to bus stationEast Ohio St + GrantID 2067414 min
- 7Walk toMillvaleHoward Street0.55 mi • 12 min
Public transit directions from Washington Junction to Millvale
Public transit stations close to Washington Junction
Washington Junction is located at Washington Junction, Millvale and the nearest public transit station is Route 88 + Connor Rd.
Bus stations close to Washington Junction:
- Route 88 + Connor Rd
- Route 88 + Wagner Dr
- Castle Shannon: Route 88 After Conner
Public transit stations close to Millvale, Millvale
Millvale is located at Howard Street, Millvale and the nearest public transit station is Mt Troy Rd + Kinkura.
Train stations close to Millvale:
- Pittsburgh Amtrak Station
Bus stations close to Millvale:
- Mt Troy Rd + Kinkura
- Mt Troy Rd + Fornof Ln
- Mt Troy Rd + Fornoff
Related Routes
- 10th St And Penn Ave to Millvale
- Pittsburgh Intermodal Station to Millvale
- North Side to Millvale
- Gateway Center to Millvale
- Steel Plaza to Millvale
- Station Square to Millvale
- South Hills Junction to Millvale
- Dormont Junction to Millvale
- Mt. Lebanon to Millvale
- Castle Shannon to Millvale
- Overbrook Junction to Millvale
- Bethel Village to Millvale
- South Hills Village to Millvale
- West Library to Millvale
- Pittsburgh (Airport) to Millvale
- Frankstown Rd at Hebron Church to Millvale
- Crafton Ingram S.C. + Bank (Citizens) to Millvale
- Village Dr + Groveton Dr to Millvale
- Coraopolis Rd + #285 to Millvale
- Churchview Garden Apartments to Millvale
Alternative route from Washington Junction to Millvale by bus and light rail via BLUE and 1
To get from Washington Junction to Millvale in Millvale, take the BLUE light rail from Washington Junction station to Wood Street station. Next, take the 1 bus from Liberty Ave + 7th St (Clark Bldg) station to East Ohio St + Grant station. The total trip duration for this route is approximately 1 hr 8 min. The ride fare is $5.50.
Step by Step
- 1Start from light rail stationWashington Junction
- 2Wait for light railBLUEInbound-North Shore
- 3Ride to light rail stationWood Street27 min
- 4Walk to bus stationLiberty Ave + 7th St (Clark Bldg)ID 18030 yd • 1 min
- 5Wait for bus1Outbound-Tarentum
- 6Ride to bus stationEast Ohio St + GrantID 2067414 min
- 7Walk toMillvaleHoward Street0.55 mi • 12 min
Questions & Answers
What is the fastest way to get from Washington Junction to Millvale?
The fastest way takes 58 minutes, using Bus line SLVR, Bus line 1.
What is the alternative route to get from Washington Junction to Millvale?
The alternative route takes 68 minutes, using Bus line BLUE, Bus line 1.
Is there a direct light rail between Washington Junction and Millvale?
No, you’ll have to take one light rail line and one bus line in total. The total travelling time is 58 min.
Which light rail line goes from Washington Junction to Millvale?
The SLVR light rail line goes from Inbound-North Shore station near Washington Junction in Bethel Park to Wood Street station. From there you’ll have to take one bus line till Wood Street station near Millvale in Millvale.
How long does it take to travel from Washington Junction to Millvale by light rail and bus?
The total travel time between Washington Junction in Bethel Park and Millvale in Millvale by light rail and bus is about 58 min.
Where do I get on the light rail near Washington Junction to get to Millvale?
Get on the SLVR light rail from the Inbound-North Shore station near Washington Junction in Bethel Park.
Where do I get off the light rail when travelling between Washington Junction and Millvale?
Get off the light rail at the Wood Street stop, which is closest to Millvale in Millvale.
How much is the light rail fare from Washington Junction to Millvale?
The ride from Washington Junction to Millvale costs $5.50.