The Most Popular Urban Mobility App in Pittsburgh.
All local mobility options in one app
How to get from Poplar to Mount Lebanon by bus and light rail?
By bus and light rail
To get from Poplar to Mount Lebanon in Pittsburgh, you’ll need to take 2 light rail lines and one bus line: take the RLSH light rail from Poplar station to Overbrook Junction station. Next, you’ll have to switch to the BLUE light rail and finally take the 36 bus from Village Dr + South Hiils Village Parking Garage station to Gilkeson Rd + Washington station. The total trip duration for this route is approximately 52 min. The ride fare is $2.75.
52min$2.75
RLSHBLUE36
Leaves from Poplar
Step by Step
- 1
Start from light rail stationPoplar - 2RLSHWait for light railRLSHOutbound-Overbrook Junction
- 3
Ride to light rail stationOverbrook Junction6 min - 4Walk to light rail stationWillow10 yd • 1 min
- 5BLUEWait for light railBLUEOutbound-South Hills Village
- 6Ride to light rail stationSouth Hills Village10 min
- 7Walk to bus stationVillage Dr + South Hiils Village Parking GarageID 1734710 yd • 1 min
- 836Wait for bus36Inbound-Downtown
- 9Ride to bus stationGilkeson Rd + WashingtonID 192695 min
- 10Walk toMount Lebanon170 yd • 3 min
*Duration based on 8am traffic
By light rail
To get from Poplar to Mount Lebanon in Pittsburgh, take the RLSH light rail from Poplar station to Overbrook Junction station. Next, take the BLUE light rail from Willow station to Highland station. The total trip duration for this route is approximately 40 min. The ride fare is $2.75.
40min$2.75
RLSHBLUELeaves from Poplar
Step by Step
- 1Start from light rail stationPoplar
- 2RLSHWait for light railRLSHOutbound-Overbrook Junction
- 3Ride to light rail stationOverbrook Junction6 min
- 4Walk to light rail stationWillow10 yd • 1 min
- 5BLUEWait for light railBLUEOutbound-South Hills Village
- 6Ride to light rail stationHighland6 min
- 7Walk toMount Lebanon0.9 mi • 19 min
*Duration based on 8am traffic
Public transit directions from Poplar to Mount Lebanon
The distance between Poplar, Pittsburgh and Mount Lebanon, Pittsburgh is approximately 5.21 mi, which can typically be travelled in 52 min. Moovit will show you the directions from Poplar to Mount Lebanon by bus and light rail, so no matter how you choose to travel in Pittsburgh – you will always have plenty of easy options.
Public transit stations close to Poplar
Poplar is located at Poplar, Pittsburgh and the nearest public transit station is Castle Shannon Blvd + Poplar.
Bus stations close to Poplar:
- Castle Shannon Blvd + Poplar
- Castle Shannon + Poplar
- Shady Ave + Mt Lebanon Station
Public transit stations close to Mount Lebanon, Pittsburgh
Mount Lebanon is located at Mount Lebanon, Pittsburgh and the nearest public transit station is Smith Road.
Bus stations close to Mount Lebanon:
- Oxford Dr + Giant Eagle
- Gilkeson Rd + Washington
- Highland Rd + Washington FS
Related Routes
- Arlington to Mount Lebanon
- Willow to Mount Lebanon
- St. Anne's to Mount Lebanon
- Hillcrest to Mount Lebanon
- Casswell to Mount Lebanon
- Denise to Mount Lebanon
- West Busway + Carnegie Station to Mount Lebanon
- Penn Ave + Millvale Ave to Mount Lebanon
- Robinson Blvd + Frankstown Rd to Mount Lebanon
- Stanton Ave + Jancey St to Mount Lebanon
- Brownsville Rd + Thurner Dr to Mount Lebanon
- Boggs Ave + Minsinger St to Mount Lebanon
- Washington Rd + Abbyville to Mount Lebanon
- Gilkeson Rd + Old Gilkeson to Mount Lebanon
- Gilkeson Rd + Cedar to Mount Lebanon
- Cedar Blvd + #1281 to Mount Lebanon
- Cedar Blvd + Beadling Rd to Mount Lebanon
- Cedar Blvd + Lindendale to Mount Lebanon
- Cedar Blvd + #1163 to Mount Lebanon
- Cedar Blvd + Mayfair to Mount Lebanon
By light rail
To get from Poplar to Mount Lebanon in Pittsburgh, take the RLSH light rail from Poplar station to Overbrook Junction station. Next, take the BLUE light rail from Willow station to Highland station. The total trip duration for this route is approximately 40 min. The ride fare is $2.75.
40min$2.75
RLSHBLUELeaves from Poplar
Step by Step
- 1Start from light rail stationPoplar
- 2RLSHWait for light railRLSHOutbound-Overbrook Junction
- 3Ride to light rail stationOverbrook Junction6 min
- 4Walk to light rail stationWillow10 yd • 1 min
- 5BLUEWait for light railBLUEOutbound-South Hills Village
- 6Ride to light rail stationHighland6 min
- 7Walk toMount Lebanon0.9 mi • 19 min
*Duration based on 8am traffic
Questions & Answers
What is the fastest way to get from Poplar to Mount Lebanon?
The fastest way takes 52 minutes, using Bus line RLSH, Bus line BLUE, Bus line 36.
What is the alternative route to get from Poplar to Mount Lebanon?
The alternative route takes 40 minutes, using Bus line RLSH, Bus line BLUE.
Is there a direct light rail between Poplar and Mount Lebanon in Pittsburgh?
No, you’ll have to take 2 light rail lines and one bus line in total. The total travelling time is 52 min.
Which light rail line goes from Poplar to Mount Lebanon in Pittsburgh?
The RLSH light rail line goes from Outbound-Overbrook Junction station near Poplar to Overbrook Junction station. From there you’ll have to take one light rail line and one bus line till Overbrook Junction station near Mount Lebanon in Pittsburgh
How long does it take to travel from Poplar to Mount Lebanon in Pittsburgh by light rail and bus?
The total travel time between Poplar and Mount Lebanon in Pittsburgh by light rail and bus is about 52 min.
Where do I get on the light rail near Poplar to get to Mount Lebanon in Pittsburgh?
Get on the RLSH light rail from the Outbound-Overbrook Junction station near Poplar in Pittsburgh.
Where do I get off the light rail when travelling between Poplar and Mount Lebanon in Pittsburgh?
Get off the light rail at the Overbrook Junction stop, which is closest to Mount Lebanon in Pittsburgh.
When is the first bus from Poplar to Mount Lebanon in Pittsburgh?
The first bus from Poplar to Mount Lebanon in Pittsburgh is BANKSVILLE. It leaves the Cochran Rd + Cedar stop at 4:52 AM.
How much is the total light rail and bus fare from Poplar to Mount Lebanon?
The ride from Poplar to Mount Lebanon costs $2.75.
