The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Oakwood + Q to Pikesville, MD by bus and train?
By bus and train
To get from Oakwood + Q to Pikesville, MD in Baltimore County, you’ll need to take 2 bus lines and one train line: take the 4A bus from Oakwood + Q station to 23rd & Franklin station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the CITYLINK LIME bus from Preston St & Charles St Wb station to Liberty Rd & Essex Rd Nb station. The total trip duration for this route is approximately 6 hr 49 min.
409min
4ANORTHEAST REGIONALCITYLINK LIME
Leaves from Oakwood + Q
Step by Step
- 1
Start from bus stationOakwood + Q - 24AWait for bus4AOakwood/Montrose
- 3
Ride to bus station23rd & FranklinID 35939 min - 4Walk to train stationPathrichmond Main Street Amtrak Station760 yd • 9 min
- 5NORTHEAST REGIONALWait for trainNORTHEAST REGIONALNew York
- 6Ride to train stationBaltimore Penn Station252 min
- 7Walk to bus stationPreston St & Charles St WbID 4065350 yd • 5 min
- 8CITYLINK LIMEWait for busCITYLINK LIMENorthwest Hospital
- 9Ride to bus stationLiberty Rd & Essex Rd NbID 530732 min
- 10Walk toPikesville, MD2.43 mi • 50 min
*Duration based on 8am traffic
Public transit directions from Oakwood + Q to Pikesville, MD
The distance between Oakwood + Q, Baltimore County and Pikesville, MD, Baltimore County is approximately 166.49 mi, which can typically be travelled in 409 min. Moovit will show you the directions from Oakwood + Q to Pikesville, MD by bus and train, so no matter how you choose to travel in Baltimore County – you will always have plenty of easy options.
Public transit stations close to Oakwood + Q
Oakwood + Q is located at Oakwood + Q, Baltimore County and the nearest public transit station is Chimborazo Boulevard + P.
Train stations close to Oakwood + Q:
- Pathrichmond Main Street Amtrak Station
Bus stations close to Oakwood + Q:
- Chimborazo Boulevard + P
- Chimborazo Boulevard + O
- P + 35th
Public transit stations close to Pikesville, MD, Baltimore County
Pikesville, MD is located at Pikesville, MD, Baltimore County and the nearest public transit station is Old Court Rd & Bedford Ave Eb.
Metro stations close to Pikesville, MD:
- Milford Mill Metro
- Rogers Ave Metro
- Old Court Metro
Bus stations close to Pikesville, MD:
- Old Court Rd & Bedford Ave Eb
- Old Court Rd & Reisterstown Rd Eb
- Reisterstown Rd & Claredon Ave Sb
Related Routes
- Holabird & Searles FS Wb to Pikesville, MD
- Owings Mills Town Center Wb to Pikesville, MD
- Lutherville Station to Pikesville, MD
- Hyattsville Crossing (Drop-Off) to Pikesville, MD
- Ridgland Rd & Cranbrook Rd Sb to Pikesville, MD
- Bus Stop at Timonium Fairgrounds Light Rail Station Sb to Pikesville, MD
- 301 Hospital Dr Eb to Pikesville, MD
- Baltimore Annapolis Blvd & Marbury Rd Sb to Pikesville, MD
- Ring Rd & Aacc Eb to Pikesville, MD
- West St & Church Cir to Pikesville, MD
- Ritchie Hwy & Mva Nb to Pikesville, MD
- Security Square Mall to Pikesville, MD
- Belair Rd & Overlea Ave Nb to Pikesville, MD
- White Marsh Mall to Pikesville, MD
- Harford & Kentucky Nb to Pikesville, MD
- Northern Pkwy & York Rd Eb to Pikesville, MD
- Northern Pkwy & Mcclean Blvd FS Eb to Pikesville, MD
- Craigmont Rd & Westview Mall Opp Wb to Pikesville, MD
- Back River Neck Rd & Lanflair Rd Sb to Pikesville, MD
- Bayner Rd & Sandalwood Rd to Pikesville, MD
Questions & Answers
What is the fastest way to get from Oakwood + Q to Pikesville, MD?
The fastest way takes 409 minutes, using Bus line 4A, Bus line NORTHEAST REGIONAL, Bus line CITYLINK LIME.
Is there a direct bus between Oakwood + Q and Pikesville, MD?
No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 6 hr 49 min.
Which bus line goes from Oakwood + Q to Pikesville, MD?
The 4A bus line goes from Oakwood/Montrose station near Oakwood + Q in Richmond to 23rd & Franklin station. From there you’ll have to take one bus line and one train line till 23rd & Franklin station near Pikesville, MD in Baltimore County.
How long does it take to travel from Oakwood + Q to Pikesville, MD by bus and train?
The total travel time between Oakwood + Q in Richmond and Pikesville, MD in Baltimore County by bus and train is about 6 hr 49 min.
Where do I get on the bus near Oakwood + Q to get to Pikesville, MD?
Get on the 4A bus from the Oakwood/Montrose stop near Oakwood + Q in Richmond.
Where do I get off the bus when travelling between Oakwood + Q and Pikesville, MD?
Get off the bus at the 23rd & Franklin stop, which is closest to Pikesville, MD in Baltimore County.
