How to get from Elkton to Riverside by bus and train?

From Elkton to Riverside by bus and train

To get from Elkton to Riverside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 4 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the ROUTE 3 bus from Aberdeen Train Station (Pulaski Hwy/Us 40) station to Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station. The total trip duration for this route is approximately 2 hr 7 min.

127min
Bus - ROUTE 4ROUTE 4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - ROUTE 3ROUTE 3
Walk to Riverside
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 4ROUTE 4
    Wait for bus
    ROUTE 4
    Loop
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    51 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Washington
  • 5
    Ride to train station
    Ride to train station
    Aberdeen, Md
    20 min
  • 6
    Walk to bus station
    Walk to bus station
    Aberdeen Train Station (Pulaski Hwy/Us 40)
    40 yd • 1 min
  • 7
    Bus - ROUTE 3ROUTE 3
    Wait for bus
    ROUTE 3
    Westbound
  • 8
    Ride to bus station
    Ride to bus station
    Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)
    25 min
  • 9
    Walk to Riverside
    Walk to
    Riverside
    70 yd • 1 min
*Duration based on 8am traffic

Alternative route from Elkton to Riverside by bus and train via ROUTE 5, NORTHEAST REGIONAL and ROUTE 3

To get from Elkton to Riverside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 5 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the ROUTE 3 bus from Aberdeen Train Station (Pulaski Hwy/Us 40) station to Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station. The total trip duration for this route is approximately 2 hr 32 min.

152min
Bus - ROUTE 5ROUTE 5
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - ROUTE 3ROUTE 3
Walk to Riverside
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 5ROUTE 5
    Wait for bus
    ROUTE 5
    Newark Train Station
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    15 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Washington
  • 5
    Ride to train station
    Ride to train station
    Aberdeen, Md
    20 min
  • 6
    Walk to bus station
    Walk to bus station
    Aberdeen Train Station (Pulaski Hwy/Us 40)
    40 yd • 1 min
  • 7
    Bus - ROUTE 3ROUTE 3
    Wait for bus
    ROUTE 3
    Westbound
  • 8
    Ride to bus station
    Ride to bus station
    Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)
    25 min
  • 9
    Walk to Riverside
    Walk to
    Riverside
    70 yd • 1 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Elkton to Riverside

The distance between Elkton, Washington, D.C. - Baltimore, MD and Riverside, Washington, D.C. - Baltimore, MD is approximately 53.52 mi, which can typically be travelled in 127 min. Moovit will show you the directions from Elkton to Riverside by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Public transit stations close to Elkton

Elkton is located at Elkton, Washington, D.C. - Baltimore, MD and the nearest public transit station is Chesapeake Blvd. After Mva.

Bus stations close to Elkton:

  • Chesapeake Blvd. After Mva
  • Rt 40 - Chili's
  • Super Wal-Mart

Public transit stations close to Riverside, Washington, D.C. - Baltimore, MD

Riverside is located at Riverside, Washington, D.C. - Baltimore, MD and the nearest public transit station is Us 40 & Bata Blvd Wb.

Bus stations close to Riverside:

  • Us 40 & Bata Blvd Wb
  • Pulaski Hwy/Us 40 (Wb) & Bata Blvd (At Intersection)
  • Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)

Related Routes

Alternative route from Elkton to Riverside by bus and train via ROUTE 5, NORTHEAST REGIONAL and ROUTE 3

To get from Elkton to Riverside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the ROUTE 5 bus from 200 Chesapeake Blvd station to Newark Train Station station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the ROUTE 3 bus from Aberdeen Train Station (Pulaski Hwy/Us 40) station to Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station. The total trip duration for this route is approximately 2 hr 32 min.

152min
Bus - ROUTE 5ROUTE 5
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - ROUTE 3ROUTE 3
Walk to Riverside
Leaves from 200 Chesapeake Blvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Elkton
  • 2
    Bus - ROUTE 5ROUTE 5
    Wait for bus
    ROUTE 5
    Newark Train Station
  • 3
    Ride to bus station
    Ride to bus station
    Newark Train Station
    15 min
  • 4
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    Washington
  • 5
    Ride to train station
    Ride to train station
    Aberdeen, Md
    20 min
  • 6
    Walk to bus station
    Walk to bus station
    Aberdeen Train Station (Pulaski Hwy/Us 40)
    40 yd • 1 min
  • 7
    Bus - ROUTE 3ROUTE 3
    Wait for bus
    ROUTE 3
    Westbound
  • 8
    Ride to bus station
    Ride to bus station
    Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)
    25 min
  • 9
    Walk to Riverside
    Walk to
    Riverside
    70 yd • 1 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Elkton to Riverside?

    The fastest way takes 127 minutes, using Bus line ROUTE 4, Bus line NORTHEAST REGIONAL, Bus line ROUTE 3.

  • What is the alternative route to get from Elkton to Riverside?

    The alternative route takes 152 minutes, using Bus line ROUTE 5, Bus line NORTHEAST REGIONAL, Bus line ROUTE 3.

  • Is there a direct bus between Elkton and Riverside in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 2 hr 7 min.

  • Which bus line goes from Elkton to Riverside in Washington, D.C. - Baltimore, MD?

    The ROUTE 4 bus line goes from Loop station near Elkton to Newark Amtrak station. From there you’ll have to take one bus line and one train line till Newark Amtrak station near Riverside in Washington, D.C. - Baltimore, MD

  • How long does it take to travel from Elkton to Riverside in Washington, D.C. - Baltimore, MD by bus and train?

    The total travel time between Elkton and Riverside in Washington, D.C. - Baltimore, MD by bus and train is about 2 hr 7 min.

  • Where do I get on the bus near Elkton to get to Riverside in Washington, D.C. - Baltimore, MD?

    Get on the ROUTE 4 bus from the Loop stop near Elkton in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when travelling between Elkton and Riverside in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Newark Amtrak stop, which is closest to Riverside in Washington, D.C. - Baltimore, MD.

Real-Time Arrivals, Schedules, Maps & More