How to get from Hyattsville Crossing Metro Station to Riverside by bus and train?

By bus and train

To get from Hyattsville Crossing Metro Station to Riverside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the F4 bus from Hyattsville Crossing+Bus Bay G station to New Carrollton+Bus Bay H station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the ROUTE 3 bus from Aberdeen Train Station (Pulaski Hwy/Us 40) station to Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light) station. The total trip duration for this route is approximately 2 hr 37 min.

157min
Bus - F4F4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - ROUTE 3ROUTE 3
Walk to Riverside
Leaves from Hyattsville Crossing+Bus Bay G

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Hyattsville Crossing Metro Station
  • 2
    Bus - F4F4
    Wait for bus
    F4
    East To New Carrollton Station
  • 3
    Ride to bus station
    Ride to bus station
    New Carrollton+Bus Bay H
    ID 3003182
    26 min
  • 4
    Walk to train station
    Walk to train station
    New Carrollton, Md
    50 yd • 1 min
  • 5
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 6
    Ride to train station
    Ride to train station
    Aberdeen, Md
    52 min
  • 7
    Walk to bus station
    Walk to bus station
    Aberdeen Train Station (Pulaski Hwy/Us 40)
    40 yd • 1 min
  • 8
    Bus - ROUTE 3ROUTE 3
    Wait for bus
    ROUTE 3
    Westbound
  • 9
    Ride to bus station
    Ride to bus station
    Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)
    25 min
  • 10
    Walk to Riverside
    Walk to
    Riverside
    70 yd • 1 min
*Duration based on 8am traffic

Alternative route by bus and train via F4, NORTHEAST REGIONAL and ROUTE 7

To get from Hyattsville Crossing Metro Station to Riverside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the F4 bus from Hyattsville Crossing+Bus Bay G station to New Carrollton+Bus Bay H station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the ROUTE 7 bus from Aberdeen Train Station (Pulaski Hwy/Us 40) station to Riverside Business Park (Brass Mill Rd & Wharf Point Ct) station. The total trip duration for this route is approximately 2 hr 55 min.

175min
Bus - F4F4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - ROUTE 7ROUTE 7
Walk to Riverside
Leaves from Hyattsville Crossing+Bus Bay G

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Hyattsville Crossing Metro Station
  • 2
    Bus - F4F4
    Wait for bus
    F4
    East To New Carrollton Station
  • 3
    Ride to bus station
    Ride to bus station
    New Carrollton+Bus Bay H
    ID 3003182
    26 min
  • 4
    Walk to train station
    Walk to train station
    New Carrollton, Md
    50 yd • 1 min
  • 5
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 6
    Ride to train station
    Ride to train station
    Aberdeen, Md
    52 min
  • 7
    Walk to bus station
    Walk to bus station
    Aberdeen Train Station (Pulaski Hwy/Us 40)
    40 yd • 1 min
  • 8
    Bus - ROUTE 7ROUTE 7
    Wait for bus
    ROUTE 7
    Westbound - Edgewood
  • 9
    Ride to bus station
    Ride to bus station
    Riverside Business Park (Brass Mill Rd & Wharf Point Ct)
    20 min
  • 10
    Walk to Riverside
    Walk to
    Riverside
    1.14 mi • 24 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Hyattsville Crossing Metro Station to Riverside

The distance between Hyattsville Crossing Metro Station, Washington, D.C. - Baltimore, MD and Riverside, Washington, D.C. - Baltimore, MD is approximately 79.11 mi, which can typically be travelled in 157 min. Moovit will show you the directions from Hyattsville Crossing Metro Station to Riverside by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Public transit stations close to Hyattsville Crossing Metro Station

Hyattsville Crossing Metro Station is located at Hyattsville Crossing Metro Station, Washington, D.C. - Baltimore, MD and the nearest public transit station is Hyattsville Crossing Metrorail Station at Bus Bay D.

Metro stations close to Hyattsville Crossing Metro Station:

  • Hyattsville Crossing Metrorail Station
  • West Hyattsville Metrorail Station
  • West Hyattsville

Train stations close to Hyattsville Crossing Metro Station:

  • College Park
  • Riverdale

Bus stations close to Hyattsville Crossing Metro Station:

  • Hyattsville Crossing Metrorail Station at Bus Bay D
  • Hyattsville Crossing Metrorail Station at Bus Bay F
  • Pg Plaza Station + Bus Bay H

Public transit stations close to Riverside, Washington, D.C. - Baltimore, MD

Riverside is located at Riverside, Washington, D.C. - Baltimore, MD and the nearest public transit station is Us 40 & Bata Blvd Wb.

Bus stations close to Riverside:

  • Us 40 & Bata Blvd Wb
  • Pulaski Hwy/Us 40 (Wb) & Bata Blvd (At Intersection)
  • Pulaski Hwy/Us 40 (Eb) & Bata Blvd (Prior To Light)

Related Routes

Alternative route by bus and train via F4, NORTHEAST REGIONAL and ROUTE 7

To get from Hyattsville Crossing Metro Station to Riverside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the F4 bus from Hyattsville Crossing+Bus Bay G station to New Carrollton+Bus Bay H station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the ROUTE 7 bus from Aberdeen Train Station (Pulaski Hwy/Us 40) station to Riverside Business Park (Brass Mill Rd & Wharf Point Ct) station. The total trip duration for this route is approximately 2 hr 55 min.

175min
Bus - F4F4
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - ROUTE 7ROUTE 7
Walk to Riverside
Leaves from Hyattsville Crossing+Bus Bay G

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Hyattsville Crossing Metro Station
  • 2
    Bus - F4F4
    Wait for bus
    F4
    East To New Carrollton Station
  • 3
    Ride to bus station
    Ride to bus station
    New Carrollton+Bus Bay H
    ID 3003182
    26 min
  • 4
    Walk to train station
    Walk to train station
    New Carrollton, Md
    50 yd • 1 min
  • 5
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 6
    Ride to train station
    Ride to train station
    Aberdeen, Md
    52 min
  • 7
    Walk to bus station
    Walk to bus station
    Aberdeen Train Station (Pulaski Hwy/Us 40)
    40 yd • 1 min
  • 8
    Bus - ROUTE 7ROUTE 7
    Wait for bus
    ROUTE 7
    Westbound - Edgewood
  • 9
    Ride to bus station
    Ride to bus station
    Riverside Business Park (Brass Mill Rd & Wharf Point Ct)
    20 min
  • 10
    Walk to Riverside
    Walk to
    Riverside
    1.14 mi • 24 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Hyattsville Crossing Metro Station to Riverside?

    The fastest way takes 157 minutes, using Bus line F4, Bus line NORTHEAST REGIONAL, Bus line ROUTE 3.

  • What is the alternative route to get from Hyattsville Crossing Metro Station to Riverside?

    The alternative route takes 175 minutes, using Bus line F4, Bus line NORTHEAST REGIONAL, Bus line ROUTE 7.

  • Is there a direct bus between Hyattsville Crossing Metro Station and Riverside?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 2 hr 37 min.

  • Which bus line goes from Hyattsville Crossing Metro Station to Riverside?

    The F4 bus line goes from East To New Carrollton Station station near Hyattsville Crossing Metro Station in Prince George's County to New Carrollton+Bus Bay H station. From there you’ll have to take one bus line and one train line till New Carrollton+Bus Bay H station near Riverside in Washington, D.C. - Baltimore, MD.

  • How long does it take to travel from Hyattsville Crossing Metro Station to Riverside by bus and train?

    The total travel time between Hyattsville Crossing Metro Station in Prince George's County and Riverside in Washington, D.C. - Baltimore, MD by bus and train is about 2 hr 37 min.

  • Where do I get on the bus near Hyattsville Crossing Metro Station to get to Riverside?

    Get on the F4 bus from the East To New Carrollton Station stop near Hyattsville Crossing Metro Station in Prince George's County.

  • Where do I get off the bus when travelling between Hyattsville Crossing Metro Station and Riverside?

    Get off the bus at the New Carrollton+Bus Bay H stop, which is closest to Riverside in Washington, D.C. - Baltimore, MD.

Real-Time Arrivals, Schedules, Maps & More