How to get from Lilydale to Monash University Building 72 Faculty of Engineering by bus and train?
From Lilydale to Monash University Building 72 Faculty of Engineering by bus and train
To get from Lilydale to Monash University Building 72 Faculty of Engineering in Clayton, you’ll need to take 2 train lines and one bus line: take the LILYDALE train from Lilydale station to Ringwood station. Next, you’ll have to switch to the LILYDALE train and finally take the 703 bus from Blackburn Station/South Pde (Blackburn) station to Monash University (Clayton) station. The total trip duration for this route is approximately 1 hr 34 min. The ride fare is A$3.30.
Step by Step
- 1Start from train stationLilydale
- 2Wait for trainLILYDALECity (Flinders Street)
- 3Ride to train stationRingwood32 min
- 4Wait for trainLILYDALECity (Flinders Street)
- 5Ride to train stationBlackburn9 min
- 6Walk to bus stationBlackburn Station/South Pde (Blackburn)ID 2101010 m • 1 min
- 7Wait for bus703Middle Brighton
- 8Ride to bus stationMonash University (Clayton)ID 1981134 min
- 9Walk toMonash University Building 72 Faculty of EngineeringAlliance Ln660 m • 9 min
Alternative route from Lilydale to Monash University Building 72 Faculty of Engineering by bus and train via 670, BELGRAVE and 703
To get from Lilydale to Monash University Building 72 Faculty of Engineering in Clayton, you’ll need to take 2 bus lines and one train line: take the 670 bus from Lilydale Station/West William St (Lilydale) station to Ringwood Station/Maroondah Hwy (Ringwood) station. Next, you’ll have to switch to the BELGRAVE train and finally take the 703 bus from Blackburn Station/South Pde (Blackburn) station to Monash University (Clayton) station. The total trip duration for this route is approximately 1 hr 51 min.
Step by Step
- 1Walk to bus stationLilydale Station/West William St (Lilydale)ID 28191130 m • 2 min
- 2Wait for bus670Ringwood
- 3Ride to bus stationRingwood Station/Maroondah Hwy (Ringwood)ID 2131836 min
- 4Walk to train stationRingwood130 m • 2 min
- 5Wait for trainBELGRAVECity (Flinders Street)
- 6Ride to train stationBlackburn9 min
- 7Walk to bus stationBlackburn Station/South Pde (Blackburn)ID 2101010 m • 1 min
- 8Wait for bus703Middle Brighton
- 9Ride to bus stationMonash University (Clayton)ID 1981130 min
- 10Walk toMonash University Building 72 Faculty of EngineeringAlliance Ln660 m • 9 min
Public transport directions from Lilydale to Monash University Building 72 Faculty of Engineering
Public transport stations close to Lilydale
Lilydale is located at Lilydale, Clayton and the nearest public transport station is Lilydale Station/Main St (Lilydale).
Bus stations close to Lilydale:
- Lilydale Station/Main St (Lilydale)
- Lilydale Station/Maroondah Hwy (Lilydale)
- Lilydale Station/West William St (Lilydale)
Public transport stations close to Monash University Building 72 Faculty of Engineering, Clayton
Monash University Building 72 Faculty of Engineering is located at Alliance Ln, Clayton and the nearest public transport station is Monash University/Research Way (Clayton).
Train stations close to Monash University Building 72 Faculty of Engineering:
- Clayton
- Huntingdale
- Westall
Bus stations close to Monash University Building 72 Faculty of Engineering:
- Monash University/Research Way (Clayton)
- Monash University (Clayton)
- Csiro/Normanby Rd (Notting Hill)
Related Routes
- Camberwell to Monash University Building 72 Faculty of Engineering
- Nunawading to Monash University Building 72 Faculty of Engineering
- 8-Melbourne Central Station/Swanston St (Melbourne City) to Monash University Building 72 Faculty of Engineering
- Lilydale to Abbotsford
- Lilydale to Ashwood
- Lilydale to Bayswater North
- Lilydale to Beaumaris
- Lilydale to Berwick
- Lilydale to Blackburn
- Lilydale to Braeside
- Lilydale to Brighton
- Lilydale to Carnegie
- Lilydale to Chelsea
- Lilydale to Doncaster East
- Lilydale to Doreen
- Lilydale to East Melbourne
- Lilydale to Endeavour Hills
- Lilydale to Ferny Creek
- Lilydale to Flemington
- Lilydale to Flinders
Alternative route from Lilydale to Monash University Building 72 Faculty of Engineering by bus and train via 670, BELGRAVE and 703
To get from Lilydale to Monash University Building 72 Faculty of Engineering in Clayton, you’ll need to take 2 bus lines and one train line: take the 670 bus from Lilydale Station/West William St (Lilydale) station to Ringwood Station/Maroondah Hwy (Ringwood) station. Next, you’ll have to switch to the BELGRAVE train and finally take the 703 bus from Blackburn Station/South Pde (Blackburn) station to Monash University (Clayton) station. The total trip duration for this route is approximately 1 hr 51 min.
Step by Step
- 1Walk to bus stationLilydale Station/West William St (Lilydale)ID 28191130 m • 2 min
- 2Wait for bus670Ringwood
- 3Ride to bus stationRingwood Station/Maroondah Hwy (Ringwood)ID 2131836 min
- 4Walk to train stationRingwood130 m • 2 min
- 5Wait for trainBELGRAVECity (Flinders Street)
- 6Ride to train stationBlackburn9 min
- 7Walk to bus stationBlackburn Station/South Pde (Blackburn)ID 2101010 m • 1 min
- 8Wait for bus703Middle Brighton
- 9Ride to bus stationMonash University (Clayton)ID 1981130 min
- 10Walk toMonash University Building 72 Faculty of EngineeringAlliance Ln660 m • 9 min
Questions & Answers
What is the fastest way to get from Lilydale to Monash University Building 72 Faculty of Engineering?
The fastest way takes 94 minutes, using Bus line LILYDALE, Bus line LILYDALE, Bus line 703.
What is the alternative route to get from Lilydale to Monash University Building 72 Faculty of Engineering?
The alternative route takes 111 minutes, using Bus line 670, Bus line BELGRAVE, Bus line 703.
Is there a direct train between Lilydale and Monash University Building 72 Faculty of Engineering?
No, you’ll have to take 2 train lines and one bus line in total. The total travelling time is 1 hr 34 min.
Which train line goes from Lilydale to Monash University Building 72 Faculty of Engineering?
The LILYDALE train line goes from City (Flinders Street) station near Lilydale in Lilydale to Ringwood station. From there you’ll have to take one train line and one bus line till Ringwood station near Monash University Building 72 Faculty of Engineering in Clayton.
How long does it take to travel from Lilydale to Monash University Building 72 Faculty of Engineering by train and bus?
The total travel time between Lilydale in Lilydale and Monash University Building 72 Faculty of Engineering in Clayton by train and bus is about 1 hr 34 min.
Where do I get on the train near Lilydale to get to Monash University Building 72 Faculty of Engineering?
Get on the LILYDALE train from the City (Flinders Street) station near Lilydale in Lilydale.
Where do I get off the train when travelling between Lilydale and Monash University Building 72 Faculty of Engineering?
Get off the train at the Ringwood stop, which is closest to Monash University Building 72 Faculty of Engineering in Clayton.
How much is the total train and bus fare from Lilydale to Monash University Building 72 Faculty of Engineering?
The ride from Lilydale to Monash University Building 72 Faculty of Engineering costs A$3.30.