Skip to main content

How to get from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown by bus and train?

By bus and train

To get from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown in Milperra, you’ll need to take 2 bus lines and one train line: take the 373 bus from Maxwell Ave after Armidale St station to Through St at Wharf St station. Next, you’ll have to switch to the 32 train and finally take the M90 bus from Strathfield Station, Albert Rd, Stand E station to Bullecourt Ave after Horsley Rd station. The total trip duration for this route is approximately 12 hr 15 min.

735min
Bus - 373373
Train - 3232
Bus - M90M90
Walk to University of Western Sydney - Bankstown
Leaves from Maxwell Ave after Armidale St
Step by Step
  • 1
    Start from bus station
    Start from bus station
    Maxwell Ave after Armidale St
  • 2
    Bus - 373373
    Wait for bus
    373
    Grafton
  • 3
    Ride to bus station
    Ride to bus station
    Through St at Wharf St
    ID 2460102
    15 min
  • 4
    Walk to train station
    Walk to train station
    Grafton Station
    ID 24601
    410 m • 6 min
  • 5
    Train - 3232
    Wait for train
    32
    Central
  • 6
    Ride to train station
    Ride to train station
    Strathfield Station
    ID 213510
    614 min
  • 7
    Walk to bus station
    Walk to bus station
    Strathfield Station, Albert Rd, Stand E
    ID 2135215
    10 m • 1 min
  • 8
    Bus - M90M90
    Wait for bus
    M90
    Liverpool Stn
  • 9
    Ride to bus station
    Ride to bus station
    Bullecourt Ave after Horsley Rd
    ID 221416
    48 min
  • 10
    Walk to University of Western Sydney - Bankstown
    Walk to
    University of Western Sydney - Bankstown
    Ian Smith Avenue
    580 m • 8 min
*Duration based on 8am traffic

Alternative route by bus and train via 374, 32 and M90

To get from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown in Milperra, you’ll need to take 2 bus lines and one train line: take the 374 bus from Ellen St at Armidale Rd station to Through St at Wharf St station. Next, you’ll have to switch to the 32 train and finally take the M90 bus from Strathfield Station, Albert Rd, Stand E station to Bullecourt Ave after Horsley Rd station. The total trip duration for this route is approximately 12 hr 15 min.

735min
Walk to bus station
Bus - 374374
Train - 3232
Bus - M90M90
Walk to University of Western Sydney - Bankstown
Leaves from Ellen St at Armidale Rd
Step by Step
  • 1
    Walk to bus station
    Walk to bus station
    Ellen St at Armidale Rd
    ID 246088
    370 m • 5 min
  • 2
    Bus - 374374
    Wait for bus
    374
    Grafton
  • 3
    Ride to bus station
    Ride to bus station
    Through St at Wharf St
    ID 2460102
    17 min
  • 4
    Walk to train station
    Walk to train station
    Grafton Station
    ID 24601
    410 m • 6 min
  • 5
    Train - 3232
    Wait for train
    32
    Central
  • 6
    Ride to train station
    Ride to train station
    Strathfield Station
    ID 213510
    614 min
  • 7
    Walk to bus station
    Walk to bus station
    Strathfield Station, Albert Rd, Stand E
    ID 2135215
    10 m • 1 min
  • 8
    Bus - M90M90
    Wait for bus
    M90
    Liverpool Stn
  • 9
    Ride to bus station
    Ride to bus station
    Bullecourt Ave after Horsley Rd
    ID 221416
    48 min
  • 10
    Walk to University of Western Sydney - Bankstown
    Walk to
    University of Western Sydney - Bankstown
    Ian Smith Avenue
    580 m • 8 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Sydney.
All local mobility options in one app
Public transport directions from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown
The distance between Maxwell Ave after Armidale St, Milperra and University of Western Sydney - Bankstown, Milperra is approximately 706.65 km, which can typically be travelled in 735 min. Moovit will show you the directions from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown by bus and train, so no matter how you choose to travel in Milperra – you will always have plenty of easy options.
Public transport stations close to Maxwell Ave after Armidale St

Maxwell Ave after Armidale St is located at Maxwell Ave after Armidale St, Milperra and the nearest public transport station is Maxwell Ave opp Flaherty St.

Train stations close to Maxwell Ave after Armidale St:

  • Grafton Station

Bus stations close to Maxwell Ave after Armidale St:

  • Maxwell Ave opp Flaherty St
  • Ellen St at Armidale Rd
  • Armidale Rd at Ellen St
Public transport stations close to University of Western Sydney - Bankstown, Milperra

University of Western Sydney - Bankstown is located at Ian Smith Avenue, Milperra and the nearest public transport station is Horsley Rd opp Beaconsfield St.

Train stations close to University of Western Sydney - Bankstown:

  • Panania Station
  • East Hills Station
  • Revesby Station

Bus stations close to University of Western Sydney - Bankstown:

  • Horsley Rd opp Beaconsfield St
  • Horsley Rd after Beaconsfield St
  • Bullecourt Ave before Ashford Ave

Alternative route by bus and train via 374, 32 and M90

To get from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown in Milperra, you’ll need to take 2 bus lines and one train line: take the 374 bus from Ellen St at Armidale Rd station to Through St at Wharf St station. Next, you’ll have to switch to the 32 train and finally take the M90 bus from Strathfield Station, Albert Rd, Stand E station to Bullecourt Ave after Horsley Rd station. The total trip duration for this route is approximately 12 hr 15 min.

735min
Walk to bus station
Bus - 374374
Train - 3232
Bus - M90M90
Walk to University of Western Sydney - Bankstown
Leaves from Ellen St at Armidale Rd
Step by Step
  • 1
    Walk to bus station
    Walk to bus station
    Ellen St at Armidale Rd
    ID 246088
    370 m • 5 min
  • 2
    Bus - 374374
    Wait for bus
    374
    Grafton
  • 3
    Ride to bus station
    Ride to bus station
    Through St at Wharf St
    ID 2460102
    17 min
  • 4
    Walk to train station
    Walk to train station
    Grafton Station
    ID 24601
    410 m • 6 min
  • 5
    Train - 3232
    Wait for train
    32
    Central
  • 6
    Ride to train station
    Ride to train station
    Strathfield Station
    ID 213510
    614 min
  • 7
    Walk to bus station
    Walk to bus station
    Strathfield Station, Albert Rd, Stand E
    ID 2135215
    10 m • 1 min
  • 8
    Bus - M90M90
    Wait for bus
    M90
    Liverpool Stn
  • 9
    Ride to bus station
    Ride to bus station
    Bullecourt Ave after Horsley Rd
    ID 221416
    48 min
  • 10
    Walk to University of Western Sydney - Bankstown
    Walk to
    University of Western Sydney - Bankstown
    Ian Smith Avenue
    580 m • 8 min
*Duration based on 8am traffic
Questions & Answers
  • What is the fastest way to get from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown?

    The fastest way takes 735 minutes, using Bus line 373, Bus line 32, Bus line M90.

  • What is the alternative route to get from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown?

    The alternative route takes 735 minutes, using Bus line 374, Bus line 32, Bus line M90.

  • Is there a direct bus between Maxwell Ave after Armidale St and University of Western Sydney - Bankstown?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 12 hr 15 min.

  • Which bus line goes from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown?

    The 373 bus line goes from Grafton station near Maxwell Ave after Armidale St in South Grafton to Through St at Wharf St station. From there you’ll have to take one bus line and one train line till Through St at Wharf St station near University of Western Sydney - Bankstown in Milperra.

  • How long does it take to travel from Maxwell Ave after Armidale St to University of Western Sydney - Bankstown by bus and train?

    The total travel time between Maxwell Ave after Armidale St in South Grafton and University of Western Sydney - Bankstown in Milperra by bus and train is about 12 hr 15 min.

  • Where do I get on the bus near Maxwell Ave after Armidale St to get to University of Western Sydney - Bankstown?

    Get on the 373 bus from the Grafton stop near Maxwell Ave after Armidale St in South Grafton.

  • Where do I get off the bus when travelling between Maxwell Ave after Armidale St and University of Western Sydney - Bankstown?

    Get off the bus at the Through St at Wharf St stop, which is closest to University of Western Sydney - Bankstown in Milperra.

Live arrivals, timetables, maps